journal article·2011-07

Effects of seawater-neutralised bauxite refinery residue on properties of concrete

S.A. Barbhuiya, P.A.M. Basheer, M.W. Clark, G.I.B. Rankin

Cement and Concrete Composites· Volume 33· Issue 6
Publisher page

Abstract

Abstract Various industrial by-products, such as fly ash, ground granulated blast-furnace slag and silica fume, have been used in concrete to improve its properties. This also enables any environmental issues associated with their disposal. Another material that is available in large quantities and requiring alternative methods of disposal is the Bauxite Refinery Reside (BRR) from the Bayer process used to extract alumina from bauxite. As this is highly caustic and causes many health hazards, Virotec International Ltd. developed a patented technology to convert this into a material that can be used commercially, known as Bauxsol™, for various environmental remediation applications. This use is limited to small quantities of seawater-neutralised BRR and hence an investigation was carried out to establish its potential utilisation as a sand replacement material in concrete. In addition to fresh properties of concrete containing seawater-neutralised BRR up to 20% by mass of Portland cement, mechanical and durability properties were determined. These properties indicated that seawater-neutralised BRR can be used to replace natural sand up to 10% by mass of cement to improve the durability properties of concrete without detrimentally affecting their physical properties. Combining these beneficial effects with environmental remediation applications, it can be concluded that there are specific applications where concretes containing seawater-neutralised BRR could be used.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bauxite Residue and Utilization · Recycling and utilization of industrial and municipal waste in materials production · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Treasury HM. Budget report 2003: building a Britain of economic strength and social justice. Parliament Street, London SW1P 3AG; 2003. [chapter 7].
2. Alternative materials for concrete – mersey silt as fine aggregate10.1016/0360-1323(80)90035-9 ↗
3. Performance and durability of concrete made with demolition waste and artificial fly ash-clay aggregate10.1016/S0956-053X(96)00038-4 ↗
4. Durability of concrete made with EAF slag as aggregate10.1016/j.cemconcomp.2006.02.008 ↗
5. Use of aggregate from recycled construction and demolition waste in concrete10.1016/j.resconrec.2006.05.010 ↗
6. Recycling of PET bottles as fine aggregate in concrete10.1016/j.wasman.2010.01.030 ↗
7. Effect of copper slag as a fine aggregate on the properties of cement mortars and concrete10.1016/j.conbuildmat.2010.06.090 ↗
8. Ostap S. Effect of bauxite mineralogy on its processing characteristics. In: Proceedings of the bauxite symposium, Los Angeles, CA; 1984. p. 651–71.
9. Efficiency of limestone and red mud barriers: laboratory column studies10.1016/j.mineng.2003.11.006 ↗
10. Reuse of treated red mud bauxite waste: studies on environmental compatibility10.1016/j.jhazmat.2004.09.010 ↗
11. McConchie D, Clark MW, Hanahan C, Fawkes R. The use of seawater-neutralised bauxite refinery residues (red mud) in environmental remediation programs. In: Gaballah I, Hager J, Solozabal R, editors. Proceedings of the 1999 global symposium on recycling, waste treatment and clean technology, San Sebastian, Spain. The Minerals, Metals and Materials Society; 1999. p. 391–400.
12. McConchie D, Clark MW, Davies-McConchie F, Bello V, Guerra M, Zilstra H. From waste to resource: the treatment and reuse of bauxite refinery residues (red mud). In: Ciccu R, editor. Proceedings of the seventh international symposium on environmental issues and waste management in energy and mineral production, Cagliari, Italy; 2002. p. 1–20.
13. Clark MW. Geochemical cycling of heavy metals in Brisbane river estuary dredge sediments during sub-arial disposal and consolidation at the Port of Brisbane Authority’s Fisherman Islands Reclamation Paddocks. PhD Thesis. Southern Cross University Lismore, Australia; 2000.
14. Arsenic removal from aqueous solution by adsorption on red mud10.1016/S0956-053X(00)00031-3 ↗
15. Removal of phenol from aqueous phase by using neutralised red mud10.1016/j.jcis.2006.04.054 ↗
16. Barbhuiya SA. An investigation on the use of seawater-neutralised bauxite refinery residue (Bauxsol™) on properties of structural concrete. PhD Thesis. Queen’s University Belfast; 2008.
17. BS EN 197-1. Cement: composition, specifications and conformity criteria for common cements. London: British Standards Institution; 2000.
18. BS EN 12620. Aggregates for concrete. London: British Standards Institution; 2002.
19. Neville · 1996
20. BS EN 206-1. Concrete – part 1: specifications, performance, production and conformity. London: British Standards Institution; 2001.
21. ASTM C 1260. Standard test method for potential alkali reactivity of aggregates (Mortar-bar method). Annual Book of American Society for Testing Materials Standards; 1994.
22. BS EN 12350-2. Testing of fresh concrete – slump test. London: British Standards Institution; 2000.
23. BS EN 12390-3. Testing of hardened concrete – compressive strength of test specimens. London: British Standards Institution; 2002.
24. BS EN 12390-5. Testing of hardened concrete – flexural strength of test specimens. London: British Standards Institution; 2002.
25. BS EN 1367-4. Tests for thermal and weathering properties of aggregates: determination of drying shrinkage. London: British Standards Institution; 1998.
26. The autoclam – a new test for permeability of concrete
27. Calculation of ionic diffusion coefficients on the basis of migration test results10.1007/BF02479554 ↗
28. NT BUILD 492. Concrete, mortar and cement based repair materials: chloride migration coefficient from non-steady state migration experiments. NORDTEST Method; 1999.
29. CDF test- test method for the freeze–thaw resistance of concrete-tests with sodium chloride solution10.1007/BF02485951 ↗
30. Berry EE. Fly ash for use in concrete, part 1 – a critical review of the chemical, physical and pozzolanic properties of fly ash. Report 76-25, CANMET, Energy, Mines and Resources, Canada; 1983. p. 60.
31. Berry EE, Malhotra VM. Fly ash for use in concrete, part 2 – a critical review of the chemical, physical and pozzolanic properties of fly ash. Report 76-25, CANMET, Energy, Mines and Resources, Canada; 1984. p. 68.
32. Newman · 2003
33. Use of pond fly ash as part replacement for mortar and concrete
34. Effect of fine aggregate replacement with Class F fly ash on the mechanical properties of concrete10.1016/S0008-8846(02)01000-1 ↗
35. Lewis R, Sear L, Wainwright P, Ryle R. Cementitious additions. In: Newman J, Choo BS, editors. Advanced Concrete Technology; 2003. p. 3/66.10.1016/B978-075065686-3/50279-2 ↗
36. Sellevold EJ, Radjy FF. Condensed silica fume (silica fume) in concrete: water demand and strength development, vol. 11. ACI Special Publication (SP-79); 1983. p. 677–94.
37. Andriolo FR, Sgaraboza BC. The use of pozzolan from calcined clays in preventing excessive expansion due to alkali–silica reaction in some Brazilian dams. In: Proceedings of the seventh international conference on AAR, Ottawa; 1986. p. 253–7.
38. Bakshi K, Kohno S, Kawasaki N, Yamaji N. Strength and durability of concrete using bottom ash as replacement for fine aggregate. ACI Special Publication (SP-179); 1998. p. 159–72.
39. Effect of sand replacement on the early-age strength gain and long-term-corrosion-resisting characteristics of fly ash concrete
40. Mehta · 2005
41. Tarr SM, Farny JA. Concrete floors on ground, EB075, 4th ed. Portland Cement Association, Skokie, Illinois, USA; 2008. p. 256.
42. Metakaolin concrete at low water to bonder ratio10.1016/j.conbuildmat.2007.06.003 ↗
43. Brooks JJ, Wainwright PJ, Cripwell JB. Time-dependent properties of concrete containing pulverized-fuel ash and superplasticiser. In: Cabrera JA, Cusens AR, editors. Proceedings of the international symposium on the sue of PFA in concrete, Leeds; 1982. p. 209–21.
44. Lamond FJ, Pielert JH. Significance of tests and properties of concrete and concrete making materials, ASTM STP 169D. ASTM International; 2006. p. 664.10.1520/STP169D-EB ↗
45. Bakker RFM. Permeability of blended cement concretes. In: Malhotra VM, editor. Proceedings of the first international conference on the use of fly ash, silica fume, slag and other mineral by-products in concrete. ACI Special Publication (SP-79); 1983. p. 589–605.
46. Influence of mineral admixtures on the permeability of lightweight aggregate concrete10.1007/BF02838506 ↗
47. Influence of pulverised-fuel ash and granulated blast furnace slag upon expansion caused by the alkali–silica reaction10.1680/macr.1982.34.119.83 ↗
48. Walters GV, Jones TR. Effect of metakaolin on alkali–silica reactions in concrete manufactured with reactive aggregates. In: Proceedings of the second international conference on the durability of concrete, Canada; 1991. p. 941–53.
49. Influence of silica fume replacement of cement on physical properties and resistance to sulphate attack, freezing and thawing, and alkali silica reactivity
50. Accelerated carbonation of a blast-furnace cement concrete10.1016/0008-8846(93)90109-M ↗
51. Effect of supplementary cementing materials on concrete resistance against carbonation and chloride ingress10.1016/S0008-8846(99)00249-5 ↗
52. Collepardi M. The influence of slag and fly ash on the carbonation of concrete. In: Eighth CANMET/ACI international conference on fly ash, silica fume, slag and natural pozzolans in concrete; 2004. p. 483–505.
53. Effects of carbonation on pore structure and diffusional properties of hydrated cement pastes10.1016/S0008-8846(97)00102-6 ↗
54. Gautefall O. Effect of condensed silica fume on the diffusion of chlorides through hardened cement paste. In: Second international conference on the use of fly ash, silica fume, slag and natural pozzolans in concrete, vol. 91, no. 46. CANMET/ACI Madrid, SP; 1986. p. 1119–33.
55. High reactivity metakaolin: a new generation mineral admixture
56. An experimental study on the properties of resistance to diffusion of chloride ions of fly ash and blast furnace slag concrete10.1016/S0008-8846(00)00250-7 ↗
57. Bilodeau A, Malhotra VM. Concrete incorporating high volumes of ASTM class F fly ashes: mechanical properties and resistance to de-icing salt-scaling and to chloride-ion penetration. In: Malhotra VM, editor. ACI Special Publication (SP-132); 1992. p. 319–49.