journal article·2023-04

Effect of NaOH content on the fluidizing effect of PCEs with different structures in NaOH-activated slag

Tong Su, Qiang Wang, Jiameng Lu

Publisher page

Abstract

The effect of NaOH content on the fluidizing effect of PCEs with varied architecture in AAS was investigated. The adsorption behavior of PCEs was measured by TOC, while their molecular stability was investigated via light transmittance and DLS. At high concentrations (>2 M), the fluidizing effect of PCEs with short side chains continuously decreased, while that of PCEs with long side chains first decreased and then increased. The decline in dispersing ability was attributed to the collapse of PCEs molecules rather than competitive adsorption of PCEs and OH − , while the subsequent improvement in the dispersing effect of PCEs with long side chains was attributed to the formation of soluble aggregates assembled by numerous PCE molecules, which resulted in a significant increase in adsorption layer thickness. PCEs with long side chains, an extremely high acid-to-ether ratio, and high molecular weight exhibited excellent dispersing effect over a wide range of NaOH concentrations.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Minerals Flotation and Separation Techniques · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Cement and carbon emissions10.1617/s11527-013-0114-5 ↗
2. Global CO2 emissions from cement production10.5194/essd-10-195-2018 ↗
3. Advances in understanding alkali-activated materials10.1016/j.cemconres.2015.04.013 ↗
4. Alkali-activated materials10.1016/j.cemconres.2017.02.009 ↗
5. The effectiveness of different superplasticizers in ambient cured one-part alkali activated pastes10.1016/j.cemconcomp.2018.12.027 ↗
6. Rheology of alkali-activated materials: a review10.1016/j.cemconcomp.2021.104061 ↗
7. 40 years of PCE superplasticizers - history, current state-of-the-art and an outlook10.1016/j.cemconres.2022.106826 ↗
8. Adsorption characteristics of superplasticizers on cement component minerals10.1016/S0008-8846(02)00782-2 ↗
9. Effect of molecular architecture of polycarboxylate ethers on plasticizing performance in alkali-activated slag paste10.1007/s10853-013-7979-0 ↗
10. Suitability of commercial superplasticizers for one-part alkali-activated blast-furnace slag mortar
11. Pore solution composition of alkali-activated slag/fly ash pastes10.1016/j.cemconres.2018.10.010 ↗
12. Molecular design of comb-shaped polycarboxylate dispersants for environmentally friendly concrete10.1039/c3sm51030a ↗
13. Impact of molecular structure and composition of polycarboxylate comb polymers on the flow properties of alkali-activated slag10.1016/j.cemconres.2018.11.014 ↗
14. Investigation into the molecular design and plasticizing effectiveness of HPEG-based polycarboxylate superplasticizers in alkali-activated slag10.1016/j.cemconres.2020.106150 ↗
15. Factors affecting the strength of alkali-activated slag10.1016/0008-8846(94)90026-4 ↗
16. Blast furnace slag hydration in an alkaline medium: influence of sodium content and sodium hydroxide molarity10.1061/(ASCE)MT.1943-5533.0003455 ↗
17. Effect of alkali dosage on alkali-silica reaction in sodium hydroxide activated slag mortars10.1016/j.conbuildmat.2017.03.125 ↗
18. Influence of dolomite on the properties and microstructure of alkali-activated slag with and without pulverized fly ash10.1016/j.cemconcomp.2019.05.011 ↗
19. Clinkerless ultra-high strength concrete based on alkali-activated slag at high temperatures10.1016/j.cemconres.2021.106465 ↗
20. A neutron scattering study of poly (ethylene glycol) in electrolyte solutions10.1021/ma00127a020 ↗
21. Microstructural characterisation and behaviour in different salt solutions of sodium polymethacrylate-g-PEO comb copolymers10.1016/j.colsurfa.2005.03.008 ↗
22. Comparative study of two PCE superplasticizers with varied charge density in Portland cement and sulfoaluminate cement systems10.1016/j.cemconres.2018.10.003 ↗
23. Preparation of isoprenol ether-based polycarboxylate superplasticizers with exceptional dispersing power in alkali-activated slag: comparison with ordinary Portland cement10.1016/j.compositesb.2021.109077 ↗
24. Correlations of the dispersing capability of NSF and PCE types of superplasticizer and their impacts on cement hydration with the adsorption in fresh cement pastes10.1016/j.cemconres.2014.11.009 ↗
25. Effect of colloidal polymers with different surface properties on the rheological property of fresh cement pastes10.1016/j.colsurfa.2017.01.067 ↗
26. Correlation between the adsorption behavior of colloidal polymer particles and the yield stress of fresh cement pastes10.1016/j.cemconres.2021.106668 ↗
27. A new insight into the working mechanism of PCE emphasizing the interaction between PCE and Ca2+ in fresh cement paste10.1016/j.conbuildmat.2020.122133 ↗
28. Effect of sulfonation modification of polycarboxylate superplasticizer on tolerance enhancement in sulfate10.1016/j.conbuildmat.2020.122095 ↗
29. Adsorbed conformations of PCE superplasticizers in cement pore solution unraveled by molecular dynamics simulations10.1038/s41598-017-16048-3 ↗
30. pH-induced conformational changes of comb-like polycarboxylate investigated by experiment and simulation10.1007/s00396-016-3932-5 ↗
31. A novel branched claw-shape lignin-based polycarboxylate superplasticizer: preparation, performance and mechanism10.1016/j.cemconres.2019.03.007 ↗
32. Aggregation behavior of double hydrophilic block copolymers in aqueous media10.1016/j.molliq.2018.11.135 ↗
33. Conformation–function relationships for the comb-shaped polymer pOEGMA10.1016/j.progpolymsci.2015.03.001 ↗
34. Adsorption of superplasticizer admixtures on alkali-activated slag pastes10.1016/j.cemconres.2009.05.005 ↗
35. Tailoring the anionic function and the side chains of comb-like superplasticizers to improve their adsorption10.1016/j.cemconres.2014.07.024 ↗
36. Effects of comb-like PCE and linear copolymers on workability and early hydration of a calcium sulfoaluminate belite cement10.1016/j.cemconres.2019.105801 ↗
37. Rheology, agglomerate structure, and particle shape of fresh geopolymer pastes with different NaOH activators content10.1016/j.conbuildmat.2018.07.205 ↗
38. Yield stress of multimodal powder suspensions: an extension of the YODEL (Yield Stress mODEL)10.1111/j.1551-2916.2007.01595.x ↗
39. Steady state flow of cement suspensions: a micromechanical state of the art10.1016/j.cemconres.2009.08.026 ↗