journal article·2003-05Open access

Physico-chemical study of Cretan ancient mortars

P. Maravelaki-Kalaitzaki, A. Bakolas, A. Moropoulou

Cement and Concrete Research· Volume 33· Issue 5

Abstract

Mortars from monuments of various periods in Crete, from Minoan up to now, have been studied (concerning mineralogical and chemical composition, grain size distribution, raw materials, tensile strength) in order to assess their durability in a marine and humid environment. The lime technology and raw materials, irrespective of the various historic periods, diversify the final composites into mortars, such as: (a) lime, (b) hydraulic lime, (c) lime with crushed brick, and (d) lime with pozzolanic material. These present binders in quantities ranging from 22% (pozzolanic mortars) to 29% (lime mortars). Hydraulic compounds, such as calcium silicate/aluminate hydrates, and tensile strength are higher in the pozzolanic mortars followed by crushed brick lime, hydraulic lime, and lime mortars. High quantities of water-soluble salts identified in the lime mortars indicate their risk of disintegration. A calculation procedure is presented herein, based on the combination of mineralogical and chemical analyses that allows the determination of the binder/aggregate proportion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Conservation Techniques and Studies · Cultural Heritage Materials Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Investigation procedures for the diagnosis of historic masonries10.1016/S0950-0618(00)00018-0 ↗
2. Atmospheric deterioration of ancient and modern hydraulic mortars10.1016/S1352-2310(00)00310-1 ↗
3. Marine aerosol and stone decay10.1016/0048-9697(95)04575-L ↗
4. The short-term effects of mortar joints on salt movement in stone10.1016/S1352-2310(96)00290-7 ↗
5. Traditional technologies in Crete providing mortars with effective mechanical properties
6. Restoration synthesis of crushed brick mortars simulating Byzantine lime and material technologies in Crete
7. Historic mortars technologies in Crete and guidelines for compatible restoration mortars
8. Microstructural characterization of the historical mortars in Venice
9. Microstructural and composition characteristics of historic mortars in Venice
10. Characterization of structural Byzantine mortars by thermogravimetric analysis10.1016/S0040-6031(98)00454-7 ↗
11. Nineteenth century hydraulic restoration mortars in the Saint Michael's Church (Leuven, Belgium). Natural hydraulic lime or cement?10.1016/S0008-8846(00)00499-3 ↗
12. L'analyse des mortiers et enduits des peintures murales et des batiments ancient
13. Methodology and validation of a hot hydrochloric acid attack for the characterization of ancient mortars10.1016/S0008-8846(99)00090-3 ↗
14. A study of the ancient mortars in the north tower of Pamplona's San Cernin church10.1016/S0008-8846(00)00325-2 ↗
15. Characterization of ancient mortars: Chemical and instrumental methods
16. A new tensile test for concrete
17. In situ strength measurements of masonry mortars
18. Chemico-physical interactions among the constituents of historical walls in Venice
19. Characterization of ancient, Byzantine and later historic mortars by thermal analysis and X-ray diffraction techniques10.1016/0040-6031(95)02571-5 ↗
20. Historic mortars in Mediterranean Monuments