On the moisture migration of concrete subject to high temperature with different heating rates
Source abstract
Abstract
Abstract A better understanding of moisture migration in concrete at high temperature can play an important role to improve the fire-resistance and radiation-shielding capability of concrete structures. In this regard, within the numerical framework of Multi-physics Lattice Discrete Particle Model, the moisture clog in concrete during heating is defined as the moisture-saturated region between the so-called “water front” and “water back” (isosurfaces of saturation = 1). The moisture migration in concrete subject to slow and fast heating has been investigated by simulating experimental tests in which moisture has been monitored via different techniques, namely 3D Neutron Tomography and Ground-Penetrating Radar. An overall consistency between experimental and numerical results has been observed, indirectly proving the effectiveness of numerical modelling and experimental monitoring of moisture migration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fire effects on concrete materials · Concrete Properties and Behavior · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Fire spalling sensitivity of high-performance concrete in heated slabs under biaxial compressive loading10.1617/s11527-019-1318-0 ↗
2. Multiphysics lattice discrete particle model for the simulation of concrete thermal spalling10.1016/j.cemconcomp.2019.103457 ↗
3. Experimental discussion on the mechanisms behind the fire spalling of concrete10.1002/fam.2254 ↗
4. Experimental insight into spalling behavior of concrete tunnel linings under fire loading10.1007/s11440-008-0069-9 ↗
5. Decontamination of radionuclides from concrete by microwave heating. I: theory
6. Spalling and pore pressure in HPC at high temperatures10.1016/S0008-8846(00)00384-7 ↗
7. Pore pressure development in hybrid fibre-reinforced high strength concrete at elevated temperatures10.1016/j.cemconres.2011.07.001 ↗
8. Effect of fibre type and geometry on maximum pore pressures in fibre-reinforced high strength concrete at elevated temperatures10.1016/j.cemconres.2011.11.014 ↗
9. Heated slabs under biaxial compressive loading: a test set-up for the assessment of concrete sensitivity to spalling10.1617/s11527-017-1055-1 ↗
10. Effects of various fibres on high-temperature spalling in high-performance concrete10.1016/j.conbuildmat.2014.07.068 ↗
11. Behavior of ring-restrained high-performance concrete under extreme heating and development of screening test10.1016/j.conbuildmat.2017.11.144 ↗
12. Pore pressure and explosive spalling in concrete10.1617/s11527-008-9353-2 ↗
13. Experimental and numerical investigation of the first heat-up of refractory concrete10.1016/j.ijthermalsci.2015.09.010 ↗
14. Li · 2020
15. Temperature, pore pressure and mass variation of concrete subjected to high temperature—experimental and numerical discussion on spalling risk10.1016/j.cemconres.2009.10.011 ↗
16. G. Ye, G. De Schutter, T. L., Spalling behaviour of small self-compacting concrete slabs under standard fire conditions, in: 5th RILEM Symposium on Self-Compacting Concrete, p. 799–8046.
17. G. Consolazio, M. McVay, R. I. J.W., Measurement and prediction of pore pressures in saturated cement mortar subjected to radiant heating, ACI Materials Journal (1998) 525–536.
18. R. Jansson, B. L., The influence of pressure in the pore system on fire spalling of concrete, in: Fire Technology, p. 217–230.10.1007/s10694-009-0093-9 ↗
19. Fire spalling of concrete, as studied by NMR10.1016/j.cemconres.2011.09.014 ↗
20. Moisture transport in heated concrete, as studied by NMR, and its consequences for fire spalling10.1016/j.cemconres.2007.03.004 ↗
21. Real-time measurements of temperature, pressure and moisture profiles in high-performance concrete exposed to high temperatures during neutron radiography imaging10.1016/j.cemconres.2014.11.003 ↗
22. B. Weber, M. Wyrzykowski, M. Griffa, S. Carl, E. Lehmann, P. Lura, Neutron radiography of heated high-performance mortar, MATEC Web of Conferences 6 (2013) 03004.10.1051/matecconf/20130603004 ↗
23. Modeling concrete exposed to high temperature: impact of dehydration and retention curves on moisture migration10.1002/nag.2802 ↗
24. Modeling of 3D moisture distribution in heated concrete: from continuum towards mesoscopic approach10.1016/j.ijheatmasstransfer.2019.02.017 ↗
25. Analysis of moisture migration in concrete at high temperature through in-situ neutron tomography10.1016/j.cemconres.2018.06.010 ↗
26. Non-destructive evaluation of concrete moisture by GPR: experimental study and direct modeling10.1007/BF02481655 ↗
27. Combining NDT techniques for improved evaluation of concrete properties10.1016/j.cemconcomp.2012.03.005 ↗
28. A method to estimate concrete hydraulic conductivity of underground tunnel to assess lining degradation10.1016/j.tust.2015.08.008 ↗
29. Effect of concrete moisture on radar signal amplitude
30. Characterization of concrete properties from dielectric properties using ground penetrating radar10.1016/j.cemconres.2009.05.004 ↗
31. Influence of concrete relative humidity on the amplitude of ground-penetrating radar (GPR) signal10.1007/BF02533080 ↗
32. Ability of the direct wave of radar ground-coupled antenna for NDT of concrete structures10.1016/j.ndteint.2005.11.003 ↗
33. Determination of volumetric water content of concrete using ground-penetrating radar10.1016/j.cemconres.2007.04.010 ↗
34. Ground-penetrating radar monitoring of concrete at high temperature10.1016/j.conbuildmat.2017.06.114 ↗
35. Bažant · 1996
36. A thermo-hydro-mechanical constitutive model and its numerical modelling for unsaturated soils10.1016/j.compgeo.2004.02.004 ↗
37. Dehydration creep of concrete at high temperatures10.1617/s11527-006-9213-x ↗
38. A fully generalised, coupled, multi-phase, hygro-thermo-mechanical model for concrete10.1617/s11527-010-9591-y ↗
39. What physical phenomena can be neglected when modelling concrete at high temperature? A comparative study. Part 1: physical phenomena and mathematical model10.1016/j.ijsolstr.2011.03.004 ↗
40. An application of a damage constitutive model to concrete at high temperature and prediction of spalling10.1016/j.ijsolstr.2005.06.016 ↗
41. What physical phenomena can be neglected when modelling concrete at high temperature? A comparative study. Part 2: comparison between models10.1016/j.ijsolstr.2011.03.003 ↗
42. Hydrothermal model for predicting fire-induced spalling in concrete structural systems10.1016/j.firesaf.2008.09.001 ↗
43. Staggered finite volume modeling of transport phenomena in porous materials with convective boundary conditions10.1007/s11242-009-9422-1 ↗
44. A three-dimensional staggered finite element approach for random parametric modeling of thermo-hygral coupled phenomena in porous media10.1002/nag.1017 ↗
45. Lattice discrete particle model (LDPM) for failure behavior of concrete. I: theory10.1016/j.cemconcomp.2011.02.011 ↗
46. Lattice discrete particle model (LDPM) for failure behavior of concrete. II: calibration and validation10.1016/j.cemconcomp.2011.02.010 ↗
47. Discrete modeling of ultra-high-performance concrete with application to projectile penetration10.1016/j.ijimpeng.2013.10.008 ↗
48. Lattice discrete particle modeling of reinforced concrete flexural behavior
49. An armour-piercing projectile penetration in a double-layered target of ultra-high-performance fiber reinforced concrete and armour steel: experimental and numerical analyses10.1016/j.matdes.2016.04.021 ↗
50. Thick plain concrete targets subjected to high speed penetration of 30CrMnSiNi2A steel projectiles: tests and analyses10.1016/j.ijimpeng.2018.09.005 ↗
51. Lattice discrete particle modeling (ldpm) of alkali silica reaction (asr) deterioration of concrete structures10.1016/j.cemconcomp.2013.04.015 ↗
52. Alnaggar · 2017
53. Discrete element framework for modeling tertiary creep of concrete in tension and compression10.1016/j.engfracmech.2018.07.006 ↗
54. General theory of three-dimensional consolidation10.1063/1.1712886 ↗
55. Three-dimensional network model forcoupling of fracture and mass transport in quasi-brittle geomaterials10.3390/ma9090782 ↗
56. A new test method to study the influence of pore pressure on fracture behaviour of concrete during heating10.1016/j.cemconres.2017.01.002 ↗
57. The influence of pore pressure on fracture behaviour of normal-strength and high-performance concretes at high temperature10.1016/j.cemconcomp.2019.103388 ↗
58. Assessing the residual fracture properties of thermally damaged high strength concrete10.1016/j.mechmat.2013.04.006 ↗
59. Mechanical properties of photocatalytic white concrete subjected to high temperatures10.1016/j.cemconcomp.2013.03.016 ↗
60. On a 2d hydro-mechanical lattice approach for modelling hydraulic fracture10.1016/j.jmps.2014.11.011 ↗
61. Multiphysics lattice discrete particle modeling (M-LDPM) for the simulation of shale fracture permeability10.1007/s00603-018-1625-8 ↗
62. Experimental evidence of a moisture clog effect in cement-based materials under temperature10.1016/j.cemconres.2009.07.015 ↗
63. Water migration in one-side heated concrete: 4d in-situ ct monitoring of the moisture-clog-effect10.1007/s10921-018-0552-7 ↗
64. Yilmaz · 2001
65. Simulation of concrete failure and fiber reinforced polymer fracture in confined columns with different cross sectional shape10.1016/j.ijsolstr.2016.12.017 ↗
66. Application of powers’ model to modern portland and portland limestone cement pastes10.1111/jace.14913 ↗
67. Physical properties of cement paste
68. Finite element analysis of coupled heat and moisture transfer in concrete subjected to fire10.1080/10407780152032839 ↗
69. Hygro-thermo-chemical modeling of high performance concrete. I: theory10.1016/j.cemconcomp.2009.02.015 ↗
70. Hygro-thermo-chemical modeling of high-performance concrete. II: Numerical implementation, calibration, and validation10.1016/j.cemconcomp.2009.02.016 ↗
71. Mesoscopic numerical simulation of effective thermal conductivity of tensile cracked concrete10.1016/j.conbuildmat.2015.07.117 ↗
72. Experimental and numerical study of effective thermal conductivity of cracked concrete10.1016/j.conbuildmat.2017.07.038 ↗
73. Yang · 2006
74. Cengel · 2011