Effects of comb-like PCE and linear copolymers on workability and early hydration of a calcium sulfoaluminate belite cement
Source abstract
Abstract
Abstract Fluidity control and setting adjustment are two critical issues for practical applications of calcium sulfoaluminate cement because of rapid hydration. A commonly used comb-like polycarboxylate superplasticizer (PCE) and linear copolymers (PAS) of acrylic acid (AA) and 2-acrylamido-2-methylpropane sulfonic acid (AMPS) with varied monomer ratio were synthesized to study their impacts on fluidity and early hydration of calcium sulfoaluminate belite cement (CSAB). Results show that the linear PAS polymers are very effective in dispersing fresh cement pastes (fcps) and effectively inhibit early hydration of the cement. More AA unit in the PAS molecules leads to stronger inhibition effect on cement hydration. Compared with the PAS polymers, PCE exhibits almost no inhibition effect on cement hydration despite the high initial dispersibility. Thus, cement pastes containing PAS polymers exhibits excellent fluidity retention compared with the PCE containing fcp due to strong retardation effect of the PAS polymers on early formation of AFt crystals.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Hydration reactions and stages of clinker composed mainly of stoichiometric ye’elimite10.1016/j.cemconres.2018.10.023 ↗
2. Studies on the early hydration of two modifications of ye’elimite with gypsum10.1016/j.cemconres.2016.11.009 ↗
3. Advances in alternative cementitious binders10.1016/j.cemconres.2010.11.012 ↗
4. Development of the use of sulfo- and ferroaluminate cements in China10.1680/adcr.1999.11.1.15 ↗
5. A. Klein, Calcium aluminosulfate and expansive cements containing same, US Patent No. 3, 155, 526, (1963, 4 pp).
6. New applications of calcium sulfoaluminate cement10.1016/j.cemconres.2003.10.019 ↗
7. Effect of retarders on the early hydration of calcium-sulpho-aluminate (CSA) type cements10.1016/j.cemconres.2016.02.014 ↗
8. Combined effects of lithium and borate ions on the hydration of calcium sulfoaluminate cement10.1016/j.cemconres.2017.03.006 ↗
9. Influence of sodium borate on the early age hydration of calcium sulfoaluminate cement10.1016/j.cemconres.2014.12.010 ↗
10. Effects of superplasticizers and retarders on the fluidity and strength of sulphoaluminate cement10.1016/j.conbuildmat.2016.09.019 ↗
11. Influence of citric acid on the hydration kinetics of calcium sulfoaluminate cement
12. Adsorption of polyelectrolytes and its influence on the rheology, zeta potential, and microstructure of various cement and hydrate phases10.1016/j.jcis.2008.04.052 ↗
13. Study on dispersion, adsorption and flow retaining behaviors of cement mortars with TPEG-type polyether kind polycarboxylate superplasticizers10.1016/j.conbuildmat.2014.04.050 ↗
14. The role of steric repulsive force in the dispersion of cement particles in fresh paste prepared with organic admixture10.1016/S0008-8846(96)00207-4 ↗
15. Compatibility between polycarboxylate-based admixtures and blended-cement pastes10.1016/j.cemconcomp.2012.08.020 ↗
16. Improving the performance of PCE superplasticizers in early stiffening Portland cement10.1016/j.conbuildmat.2016.11.015 ↗
17. Change in reaction kinetics of a Portland cement caused by a superplasticizer — calculation of heat flow curves from XRD data10.1016/j.cemconres.2011.10.005 ↗
18. A contribution to the explanation of the action principles of organic plasticizers10.1016/j.cemconres.2004.07.014 ↗
19. A simplified view on chemical effects perturbing the action of superplasticizers10.1016/S0008-8846(01)00534-8 ↗
20. Comparative study of two PCE superplasticizers with varied charge density in Portland cement and sulfoaluminate cement systems10.1016/j.cemconres.2018.10.003 ↗
21. Compatibility between a polycarboxylate superplasticizer and the belite-rich sulfoaluminate cement: setting time and the hydration properties10.1016/j.conbuildmat.2013.10.028 ↗
22. Effect of borax on rheology of calcium sulphoaluminate cement paste in the presence of polycarboxylate superplasticizer10.1016/j.conbuildmat.2017.02.005 ↗
23. Competitive adsorption between superplasticizer and retarder molecules on mineral binder surface10.1016/j.cemconres.2007.12.003 ↗
24. A review of cement-superplasticizer interactions and their models10.1680/adcr.2000.12.4.153 ↗
25. Effect of admixtures on the setting times of high-strength concrete10.1016/S0958-9465(00)00025-1 ↗
26. Interparticle potential and sedimentation behavior of cement suspensions: effects of admixtures10.1016/S1065-7355(98)00005-4 ↗
27. Influence of kind and added timing of organic admixture on the composition, structure and property of fresh cement paste10.1016/0008-8846(95)00021-6 ↗
28. A review of the mechanisms of set-retardation in Portland cement pastes containing organic admixtures10.1016/0008-8846(72)90057-9 ↗
29. Utilisation of industrial wastes and by-products for the synthesis of special cements10.1016/0921-3449(93)90002-W ↗
30. Reaction of Portland cement clinker with gaseous SO2 to form alite-ye’elimite clinker10.1016/j.cemconres.2018.11.021 ↗
31. The composition and performance of alite-ye’elimite clinker produced at 1300 °C10.1016/j.cemconres.2018.02.009 ↗
32. Rietveld quantitative phase analysis of Yeelimite-containing cements10.1016/j.cemconres.2012.03.018 ↗
33. Silicon-free compounds with sodalite structure10.1002/crat.19720070125 ↗
34. Structure of calcium aluminate sulfate Ca4Al6O16S10.1016/0022-4596(95)80002-7 ↗
35. A more accurate determination of the crystal structure of anhydrite, CaSO4
36. The crystal structure of brownmillerite, Ca2FeAlO510.1107/S056774087100579X ↗
37. Rietveld crystal structure refinements, crystal-chemistry and calculated powder diffraction data for the polymorphs of dicalcium silicate and related phases
38. Über die Kristallstruktur des Periclas
39. Crystal structure of calcium sulphosilicate, Ca5(SiO4)2SO410.1071/CH9740657 ↗
40. The crystal structure of tricalcium aluminate, Ca3Al2O610.1107/S0567740875003639 ↗
41. Orthorhombic perovskite CaTiO3 and CdTiO3: structure and space group10.1107/S0108270187090620 ↗
42. A microstructural analysis of isoprenol ether-based polycarboxylates and the impact of structural motifs on the dispersing effectiveness10.1016/j.cemconres.2016.02.010 ↗
43. Applications of an eight-channel isothermal conduction calorimeter for cement hydration studies
44. Molecular and submolecular scale effects of comb-copolymers on tri-calcium silicate reactivity: toward molecular design10.1111/jace.14695 ↗
45. The effect of calcium lignosulfonate on ettringite formation in cement paste10.1016/j.cemconres.2018.02.021 ↗
46. Modification of the rate of formation and surface area of ettringite by polycarboxylate ether superplasticizers during early C3A–CaSO4 hydration10.1016/j.cemconres.2014.12.007 ↗
47. Impact of water activity on the stability of ettringite10.1016/j.cemconres.2015.07.008 ↗
48. Thermal stability and decomposition mechanisms of ettringite at 120°C10.1016/S0008-8846(01)00558-0 ↗
49. Working mechanism of post-acting polycarboxylate superplasticizers containing acrylate segments10.1002/app.45753 ↗
50. Effects of the molecular architecture of comb-shaped superplasticizers on their performance in cementitious systems10.1016/j.cemconcomp.2006.12.006 ↗
51. Hydration of calcium sulfoaluminate cement at less than 24 h10.1680/adcr.2002.14.4.141 ↗
52. Hydration kinetics of tri-calcium silicate in the presence of superplasticizers10.1021/jp027346b ↗
53. Effects of polycarboxylate superplasticizers with different molecular structure on the hydration behavior of cement paste10.1016/j.conbuildmat.2015.12.178 ↗
54. Interaction of polycarboxylate-based superplasticizers with cements containing different C3A amounts10.1016/j.cemconcomp.2009.01.005 ↗
55. Correlations of the dispersing capability of NSF and PCE types of superplasticizer and their impacts on cement hydration with the adsorption in fresh cement pastes10.1016/j.cemconres.2014.11.009 ↗
56. Hydration mechanism of sulphoaluminate cement10.1007/s11595-014-0869-8 ↗
57. Hydration of calcium sulfoaluminate cements—experimental findings and thermodynamic modelling10.1016/j.cemconres.2009.08.014 ↗
58. Pourchet · 2007
59. The influence of superplasticizers on the hydration of Portland cement
60. Effects of the chemical structure on the properties of polycarboxylate-type superplasticizer10.1016/S0008-8846(99)00230-6 ↗
61. Retardation effect of styrene-acrylate copolymer latexes on cement hydration10.1016/j.cemconres.2015.04.014 ↗
62. Effects of the charge characteristics of polycarboxylate superplasticizers on the adsorption and the retardation in cement pastes10.1016/j.cemconres.2014.10.004 ↗
63. Influence of polymer on cement hydration in SBR-modified cement pastes10.1016/j.cemconres.2006.05.020 ↗
64. Adsorption characteristics of superplasticizers on cement component minerals10.1016/S0008-8846(02)00782-2 ↗
65. Effect of superplasticizers on the early age hydration of sulfoaluminate cement10.1007/s11595-014-0992-6 ↗
66. Effects of polycarboxylic acid based superplasticiser on properties of sulphoaluminate cement10.1179/143307509X402101 ↗
67. Effects of the chemical structure of polycarboxy-ether superplasticizer on its performance in sulphoaluminate cement10.1080/01932691.2010.488132 ↗