Failure mechanism study of multi-hierarchy pre-tightening tooth connection based on an optimization-driven design approach
Source abstract
Abstract
Abstract The bio-inspired multi-hierarchy fractal design of composite Pre-Tightening Tooth Connections (PTTC) offers significant potential to enhance their load-bearing capacity. However, the failure mechanisms of multi-hierarchy PTTC structures remain inadequately explored, and the involvement of numerous interrelated geometric parameters renders the engineering design process highly complex. To address these challenges, this study conducts a comprehensive analysis of the failure behavior and load transfer mechanisms in multi-hierarchy PTTC joints through an optimization-based design methodology. A systematic optimization framework is first proposed to evaluate joint strength under various geometric parameter combinations, establishing a mathematical correlation between sub-tooth geometry and joint bearing performance. Subsequently, a progressive damage model is employed to visualize the damage evolution within the joint. Finally, experimental investigations are carried out to validate the influence of sub-tooth geometry on the mechanical performance of the connection. The results demonstrate that the multi-hierarchy PTTC configuration effectively distributes local stress concentrations and delays the onset of failure along the primary shear plane by establishing multi-hierarchy load transfer paths. Moreover, the spatially decoupled distribution of secondary shear planes formed by sub-teeth contributes to further stress relief, thereby improving the overall structural integrity and load-bearing efficiency of the connection.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Gear and Bearing Dynamics Analysis · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Civil Engineering , Chongqing Jiaotong University , Chongqing 400074 , China
College of Material Science and Engineering , Chongqing Jiaotong University , Chongqing 400074 , China
College of Mechanical and Power Engineering , Nanjing Tech University , Nanjing 211816 , China
References (40)
Show source-provided references
1. Chen, C, Fang, H, Han, J, Qi, Y. Structural performance evaluation of pultruded GFRP composite space truss: experimental study and numerical simulation. Case Stud Constr Mater 2022;17:e01551. https://doi.org/10.1016/j.cscm.2022.e01551.10.1016/j.cscm.2022.e01551 ↗
2. Zhang, D, Yuan, J, Zhao, Q, Li, F, Gao, Y, Zhu, R, et al.. Static performance of a new GFRP–metal string truss bridge subjected to unsymmetrical loads. Steel Compos Struct 2020;35:641–57. https://doi.org/10.12989/scs.2020.35.5.641.
3. Zhang, D, Lv, Y, Zhao, Q, Li, F. Development of lightweight emergency bridge using GFRP–metal composite plate-truss girder. Eng Struct 2019;196:109291. https://doi.org/10.1016/j.engstruct.2019.109291.10.1016/j.engstruct.2019.109291 ↗
4. Zhang, D, Yuan, J, Li, F, Lv, Y, Zhao, Q, Gao, Y, et al.. Experimental characterization of static behavior of a new GFRP–metal space truss deployable bridge: comparative case study. J Bridge Eng 2021;26:05020011. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001650.10.1061/(ASCE)BE.1943-5592.0001650 ↗
5. Zhu, R, Li, F, Shao, F, Zhang, D. Static and dynamic behaviour of a hybrid PFRP–aluminium space truss girder: experimental and numerical study. Compos Struct 2020;243:112226. https://doi.org/10.1016/j.compstruct.2020.112226.10.1016/j.compstruct.2020.112226 ↗
6. Zhu, R, Li, F, Zhang, D, Tao, J. Effect of joint stiffness on deformation of a novel hybrid FRP–aluminum space truss system. J Struct Eng 2019;145:04019123. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002426.10.1061/(ASCE)ST.1943-541X.0002426 ↗
7. Zhu, R, Li, F, Zhao, Z, Zhang, D, Chen, Y. Compression behavior of square pyramid substructure of novel pultruded FRP-aluminum space truss. J Compos Construct 2020;24:04020062. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001074.10.1061/(ASCE)CC.1943-5614.0001074 ↗
8. Zhang, D, Zhao, Q, Li, F, Tao, J, Gao, Y. Torsional behavior of a hybrid FRP-aluminum space truss bridge: experimental and numerical study. Eng Struct 2018;157:132–43. https://doi.org/10.1016/j.engstruct.2017.12.013.10.1016/j.engstruct.2017.12.013 ↗
9. Liu, Z. Study on load distribution of composite material preload tooth connection based on soft matter [master’s thesis]. Chongqing: Chongqing Jiaotong University; 2022.
10. Li, F. Research on new type of pultruded composite connection and application in the truss [dissertation]. Nanjing: PLA University of Science and Technology; 2012.
11. Xu, L. Research on bearing capacity calculation and experiment of composite tubes pre-tightened teeth [master’s thesis]. Nanjing: PLA University of Science and Technology; 2015.
12. Li, Y, Ortiz, C, Boyce, MC. A generalized mechanical model for suture interfaces of arbitrary geometry. J Mech Phys Solid 2013;61:1144–67. https://doi.org/10.1016/j.jmps.2012.10.004.10.1016/j.jmps.2012.10.004 ↗
13. Wei, Z, Xu, X. Gradient design of bio-inspired nacre-like composites for improved impact resistance. Composites Part B Eng 2021;215:108830. https://doi.org/10.1016/j.compositesb.2021.108830.10.1016/j.compositesb.2021.108830 ↗
14. Shi, L. Study on the failure mechanism of bearing capacity of composite material preload tooth connection based on multi-hierarchy teeth [master’s thesis]. Chongqing: Chongqing Jiaotong University; 2023.
15. Li, F, Chen, W, Xiao, Y, Ma, L, Gao, Y. Failure analysis of composite pre-tightened multi-hierarchy tooth joint based on suture structure. J Bionic Eng 2025;22:262–81. https://doi.org/10.1007/s42235-024-00611-6.10.1007/s42235-024-00611-6 ↗
16. Li, F, Liu, Z, Duan, J, Jiang, F. Research on failure mode and load distribution pattern of composite pretightened tooth connections under different tooth shapes. Eng Fail Anal 2020;118:104801. https://doi.org/10.1016/j.engfailanal.2020.104801.10.1016/j.engfailanal.2020.104801 ↗
17. Lin, Q, Yang, N, Hong, J, Liu, L, Zhang, Y. An optimization design of contact interface material stiffness for improving the uniformity of the contact pressure. J Tribol 2020;142:061502. https://doi.org/10.1115/1.4046172.10.1115/1.4046172 ↗
18. Zhou, Y, Lin, Q, Hong, J, Yang, N. Combined interface shape and material stiffness optimization for uniform distribution of contact stress. Mech Base Des Struct Mach 2023;51:1001–15. https://doi.org/10.1080/15397734.2020.1860086.10.1080/15397734.2020.1860086 ↗
19. Valente, JPA, Campilho, RDSG, Marques, EAS, Machado, JJM, Silva, LFM. Geometrical optimization of adhesive joints under tensile impact loads using cohesive zone modelling. Int J Adhes Adhes 2020;97:102492. https://doi.org/10.1016/j.ijadhadh.2019.102492.10.1016/j.ijadhadh.2019.102492 ↗
20. Li, F, Zhao, Q, Liu, Z, Zhang, D, Shi, L, Duan, J. Load distribution of composite pre-tightened teeth connections embedded with soft layers. Compos Struct 2022;300:116070. https://doi.org/10.1016/j.compstruct.2022.116070.10.1016/j.compstruct.2022.116070 ↗
21. Jiang, H, Gao, S, Li, G, Cui, J. Structural design of half hollow rivet for electromagnetic self-piercing riveting process of dissimilar materials. Mater Des 2019;183:108141. https://doi.org/10.1016/j.matdes.2019.108141.10.1016/j.matdes.2019.108141 ↗
22. Wang, H, Hao, X, Yan, K, Zhou, H, Hua, L. Ultrasonic vibration-strengthened adhesive bonding of CFRP-to-aluminum joints. J Mater Process Technol 2018;257:213–26. https://doi.org/10.1016/j.jmatprotec.2018.03.003.10.1016/j.jmatprotec.2018.03.003 ↗
23. Akpinar, S, Akpinar, IA. Influence of carbon and glass fiber reinforced composite adhesive on the strength of adhesively bonded joints. Mater Test 2023;65:802–14. https://doi.org/10.1515/mt-2022-0284.10.1515/mt-2022-0284 ↗
24. Guzman Palacios, C, Trias Mansilla, D, Maldonado Arteaga, A. A methodology to optimize the design of bolted joints. Investig Tecnol IST Cent Tec 2020;2:13. https://doi.org/10.70998/itistct.v2i1.30.
25. Niu, C, Zhang, W, Gao, T. Topology optimization of continuum structures for the uniformity of contact pressures. Struct Multidiscip Optim 2019;60:185–210. https://doi.org/10.1007/s00158-019-02208-8.10.1007/s00158-019-02208-8 ↗
26. Kristiansen, H, Poulios, K, Aage, N. Topology optimization for compliance and contact pressure distribution in structural problems with friction. Comput Methods Appl Mech Eng 2020;364:112915. https://doi.org/10.1016/j.cma.2020.112915.10.1016/j.cma.2020.112915 ↗
27. Gao, Y, Li, F, Zhao, Q, Gao, J, Hu, Y. Strength prediction of a single tooth bound to composite pre-tightened tooth connection (PTTC) joints based on different failure criteria. KSCE J Civ Eng 2019;23:3547–59. https://doi.org/10.1007/s12205-019-1988-8.10.1007/s12205-019-1988-8 ↗
28. Chen, K, Yang, C, Zhao, Y, Niu, P, Niu, N, Wu, H. Optimization of square-shaped bolted joints based on improved particle swarm optimization algorithm. Eksploat Niezawodn 2023;25:168487. https://doi.org/10.17531/ein/168487.10.17531/ein/168487 ↗
29. Arhore, EG, Yasaee, M, Dayyani, I. Comparison of GA and topology optimization of adherend for adhesively bonded metal composite joints. Int J Sol Struct 2021;226:111078. https://doi.org/10.1016/j.ijsolstr.2021.111078.10.1016/j.ijsolstr.2021.111078 ↗
30. Wang, H, Li, J, Liu, L. Process optimization and weld forming control based on GA-BP algorithm for riveting-welding hybrid bonding between magnesium and CFRP. J Manuf Process 2021;70:97–107. https://doi.org/10.1016/j.jmapro.2021.08.024.10.1016/j.jmapro.2021.08.024 ↗
31. Hou, W, Xu, X, Han, X, Wang, H, Tong, L. Multi-objective and multi-constraint design optimization for hat-shaped composite T-joints in automobiles. Thin-Walled Struct 2019;143:106232. https://doi.org/10.1016/j.tws.2019.106232.10.1016/j.tws.2019.106232 ↗
32. Systèmes, D. Abaqus scripting user’s manual: abaqus 6.11. Providence (RI): Dassault Systèmes Simulia Corp; 2012.
33. Chen, MZ, Li, F, Zhao, QL, Zhang, DD, Ye, ST, Yang, WB. Experimental and numerical investigations on the mechanical behavior of composite pre-tightened tooth connection under impact loading. Thin-Walled Struct 2025;208:112803. https://doi.org/10.1016/j.tws.2024.112803.10.1016/j.tws.2024.112803 ↗
34. Hashin, Z. Fatigue failure criteria for unidirectional fiber composites. J Appl Mech 1981;48:846–52. https://doi.org/10.1115/1.3157744.10.1115/1.3157744 ↗
35. Gao, Y, Li, F, Zhao, Q, Gao, J, Yan, X, Xu, L. Failure modes and failure mechanisms of single tooth bound to composite pre-tightened tooth connection. J Reinf Plast Compos. 2018;37:267–83. https://doi.org/10.1177/0731684417741205.10.1177/0731684417741205 ↗
36. Li, F, Yang, W, Zhao, Q, Gao, X, Xu, X. Failure analysis of composite pre-tightened teeth joints under bending and tension coupling load. Eng Fail Anal 2023;151:107408. https://doi.org/10.1016/j.engfailanal.2023.107408.10.1016/j.engfailanal.2023.107408 ↗
37. Bin, MRMS, Rousseau, J, Fontaine, S, Gong, XJ. Experimental study of the influence of ply orientation on DCB mode-I delamination behavior by using multidirectional fully isotropic carbon/epoxy laminates. Compos Struct 2017;161:1–7. https://doi.org/10.1016/j.compstruct.2016.11.036.10.1016/j.compstruct.2016.11.036 ↗
38. Gong, Y, Zhang, B, Mukhopadhyay, S, Hallett, SR. Experimental study on delamination migration in multidirectional laminates under mode II static and fatigue loading, with comparison to mode I. Compos Struct 2018;201:683–98. https://doi.org/10.1016/j.compstruct.2018.06.081.10.1016/j.compstruct.2018.06.081 ↗
39. Ramji, A, Xu, Y, Yasaee, M, Grasso, M, Webb, P. Delamination migration in CFRP laminates under mode I loading. Compos Sci Technol 2020;190:108067. https://doi.org/10.1016/j.compscitech.2020.108067.10.1016/j.compscitech.2020.108067 ↗
40. Qu, Z, Zhao, C, An, L. A micromechanics perspective on the intralaminar and interlaminar damage mechanisms of composite laminates considering ply orientation and loading condition. Compos Struct 2024;347:118454. https://doi.org/10.1016/j.compstruct.2024.118454.10.1016/j.compstruct.2024.118454 ↗