Study on the interface strengthening and evolution law of wear properties of ZTAp reinforced iron-based composites
Source abstract
Abstract
Abstract Preparing iron-based composites with zirconia toughened alumina particles (ZTAp) and mixed carbide niobium particles (NbCp) by powder metallurgy has been established as an important way to extend the service life of the cutting teeth. However, the severe shedding of ZTAp under harsh working conditions significantly reduces the performance of the composite material. In this paper, the surface of ZTAp was plated with cobalt to improve interface bonding with the iron matrix. Subsequently, the composite material was subjected to impact abrasive wear tests. The primary factor affecting the electroless plating process is the pH value of the plating solution, followed by the concentration of NaH 2 PO 2 ·H 2 O, and the concentration of C 4 H 4 Na 2 O 6 ·2H 2 O. The composite material containing 15 % mass fraction of irregularly shaped ZTAp particles (2 mm) exhibited enhanced hardness and excellent overall performance. The wear progression of the composite material was characterized by three stages: matrix wear, the particle wear resistance, and particle shedding. The cobalt layer deposited on the surface of ZTAp mainly reinforced the bonding with the iron matrix, improved wear resistance during the particle wear resistance phase, and prolonged the protective influence of ZTAp on the matrix. Overall, these findings provide a valuable basis for optimizing the wear performance of composite.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Aluminum Alloys Composites Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical , North China University of Water Resources and Electric Power , Zhengzhou , 450045 , China
References (33)
Show source-provided references
1. Ge, SR, Wang, QL, Wang, JX. The impact wear-resistance enhancement mechanism of medium manganese steel and its applications in mining machines. Wear 2017;376–377:1097–104. https://doi.org/10.1016/j.wear.2017.01.015.10.1016/j.wear.2017.01.015 ↗
2. Li, B, Tang, W, Wang, X. Study on impact abrasive wear resistance of plasma cladding high vanadium ferroalloy base alloy coating. Foundry 2022;71:409–14.
3. Wang, T, Hu, F, Zhou, W, Yin, C, Ke, R, Wu, K. Effect of impact load on wear properties and wear resistance mechanism of 10Mn steel. J Iron Steel Res 2022;34:478–88.
4. Chen, J, Xie, ZP, Zeng, WN, Wu, W. Toughening mechanisms of ZTA ceramics at cryogenic temperature (77K). Ceram Int 2017;43:3970–4. https://doi.org/10.1016/j.ceramint.2016.11.072.10.1016/j.ceramint.2016.11.072 ↗
5. Luo, H, Cai, Q, Wei, B, Yu, B, Li, D, He, J, et al.. Effect of (NaPO3) concentrations on corrosion resistance of plasma electrolytic oxidation coatings formed on magnesium alloy. J Alloys Compd 2008;464:537–43. https://doi.org/10.1016/j.jallcom.2007.10.072.10.1016/j.jallcom.2007.10.072 ↗
6. Liu, G, Xu, C, Chen, H, Hou, X, Liu, Y. Electroless deposition method for silver-coated carbon fibres. Micro Nano Lett 2015;10:315–17. https://doi.org/10.1049/mnl.2014.0620.10.1049/mnl.2014.0620 ↗
7. Zhao, GL, Yong, Z, Zhang, H, Zou, Z. Correlation between corrosion resistance and the local atomic structure of electroless, annealed Ni-P amorphous alloys. Mater Lett 2014;132:221–3. https://doi.org/10.1016/j.matlet.2014.06.081.10.1016/j.matlet.2014.06.081 ↗
8. Cheng, YH, Zou, Y, Cheng, L, Liu, W. Effect of the micro-structure on the antifouling property of the electroless Ni-P coating. Mater Lett 2008;62:4283–5. https://doi.org/10.1016/j.matlet.2008.07.002.10.1016/j.matlet.2008.07.002 ↗
9. Peng, SJ, Song, LY, Wang, YH, Liu, J, Xu, MR, Zhang, RG. The suspension-emulsion combined polymerization of fluorinated acrylic monomer and the fluorinated latex film surface properties. Colloid Polym Sci 2011;289:149–57. https://doi.org/10.1007/s00396-010-2325-4.10.1007/s00396-010-2325-4 ↗
10. Duari, S, Barman, TK, Sahoo, P. Comparative study of tribological properties of Ni-P coatings under dry and lubricated conditions. Sci Direct 2014;5:978–87. https://doi.org/10.1016/j.mspro.2014.07.386.10.1016/j.mspro.2014.07.386 ↗
11. Georgieva, MG. Study of a system for creating a statistical model of the electroless plating of Cu-Ni-P alloys. Trans Inst Met Finish Int J Surf Eng Coat 2022;110:318–23. https://doi.org/10.1080/00202967.2022.2107773.10.1080/00202967.2022.2107773 ↗
12. Shen, Y, Guo, J, Wang, L, Han, H, Ma, Y, Xin, B, et al.. Acceleration mechanism of triethanolamine in electroless bath for pure cobalt deposition. J Electrochem Soc 2023;170:112503. https://doi.org/10.1149/1945-7111/ad0a74.10.1149/1945-7111/ad0a74 ↗
13. Zhang, C. Preparation of ultrafine Al2O3-TiC-Co composite powder and study on composite materials. Hangzhou: Zhejiang University; 2004.
14. Du, GX, Wang, XH, Tu, G, Zhou, XH, Hao, WX. Analysis of properties of ceramic powder after cobalt plating. Fine Chem Industry 2005;9:668–70.
15. Zhang, F, Shao, F, Zhou, D. Study on impact wear mechanism of Mn13Cr2 high manganese steel. J Hunan Univ Nat Sci Ed 2014;41:6–10.
16. Zhao, X, Zhang, H, Wang, Q-L, Wang, F. Impact abrasive wear properties of hot rolled high manganese steel Mn13. J Xuzhou Inst Technol Nat Sci Ed 2014;29:61–6.
17. Chen, ZK, Zhu, QH, Wang, J, Yun, X, He, B, Luo, J. Behaviors of 40Cr steel treated by laser quenching on impact abrasive wear. Opt Laser Technol 2018;103:118–25. https://doi.org/10.1016/j.optlastec.2018.01.039.10.1016/j.optlastec.2018.01.039 ↗
18. Sommer, F, Landfried, R, Kern, F, Gadow, R. Mechanical properties of zirconia toughened alumina with 10–24 vol.% 1.5 mol% Y-TZP reinforcement. J Eur Ceram Soc 2012;32:3905–10. https://doi.org/10.1016/j.jeurceramsoc.2012.02.057.10.1016/j.jeurceramsoc.2012.02.057 ↗
19. Hu, Z, Tong, G, Lin, D, Chen, C, Guo, H, Xu, J, et al.. Graphene-reinforced metal matrix nanocomposites. Mater Sci Technol 2016;32:930–53. https://doi.org/10.1080/02670836.2015.1104018.10.1080/02670836.2015.1104018 ↗
20. Li, Y, Li, C, Tang, S, Zheng, Q, Wang, Z, Zhang, Z, et al.. Interfacial bonding and abrasive wear behavior of iron matrix composite reinforced by ceramic particles. Materials 2019;12:3646. https://doi.org/10.3390/ma12223646.10.3390/ma12223646 ↗
21. Bai, C. Study on strengthening and impact wear resistance of ZTAp/Fe45 composites. Beijing: China University of Mining and Technology (Beijing); 2021.
22. Bai, C, Qin, Y, Fan, L, Chen, H, Pan, Y, Liu, Z. Study on impact wear mechanism of ZTAp/Fe45 composite. Coal Mine Machinery 2021;42:87–9.
23. Wang, Y, Qin, Y, Fu, D, Chen, H, Pan, Y, Zhu, C, et al.. Behaviors of ZTA (zirconia toughened alumina) reinforced iron composites under impact abrasive wear conditions. Wear 2022;458–459:203397. https://doi.org/10.1016/j.wear.2020.203397.10.1016/j.wear.2020.203397 ↗
24. Wang, Y, Fu, D, Xin, Z. Study on strength and toughness of ZTAp/Fe45 composites. J Min Sci 2020;5:556–63.
25. Zheng, BC, Li, W, Song, S, Huang, WJ. Effect of ZTA ceramic particles strengthened high chromium white cast iron on three-body abrasion behavior. Mater Res Express 2019;6:116581. https://doi.org/10.1088/2053-1591/ab489c.10.1088/2053-1591/ab489c ↗
26. Fan, L, Wang, Q, Yang, P, Chen, H, Hong, H, Zhang, W, et al.. Preparation of nickel coating on ZTA particles by electroless plating. Ceram Int 2018;44:11013–21. https://doi.org/10.1016/j.ceramint.2018.03.055.10.1016/j.ceramint.2018.03.055 ↗
27. Qin, Y, Wang, Y, Miao, W, Yang, P, Fu, D, Fan, L, et al.. Interface modification and impact abrasive wear behavior of ZTA particle-reinforced iron-matrix composite. Wear 2021;490–491:204205. https://doi.org/10.1016/j.wear.2021.204205.10.1016/j.wear.2021.204205 ↗
28. Li, KL, Li, W, Yi, YL. Interface characteristics and wear resistance of Ni B4c p1ated ZTA reinforced high chromium cast iron composite. China Foundry 2023;20:253–62. https://doi.org/10.1007/s41230-023-2160-0.10.1007/s41230-023-2160-0 ↗
29. Fukushima, KA, Sadoun, MJ, Cesar, PF, Mainjot, AK. Residual stress profiles in veneering ceramic on Y-TZP, alumina and ZTA frameworks: measurement by holedrilling. Dent Mater 2014;30:105–11. https://doi.org/10.1016/j.dental.2013.10.005.10.1016/j.dental.2013.10.005 ↗
30. Xu, FW. Preparation and wear resistance of ZTA/high chromium cast iron composites. Guangzhou: Jinan University; 2018.
31. Shifeng, W, Guohua, L, Jiawei, Z, Kaian, L, Shibin, Z. Preparation and impact-abrasive wear behavior of NbC-Reinforced iron matrix composites. Adv Eng Mater 2023;25:2301261. https://doi.org/10.1002/adem.202301261.10.1002/adem.202301261 ↗
32. Dietrich, K, Niez, JJ, Berger, JF. Microscopic transport theory of nuclear processes. Nucl Phys, 2010, 832: 249-88. https://doi.org/10.1016/j.nuclphysa.2009.11.004.10.1016/j.nuclphysa.2009.11.004 ↗
33. Sahraeinejad, S, Izadi, H, Haghshenas, M, Gerlich, A. Fabrication of metal matrix composites by friction stir processing with different particles and processing parameters. Mater Sci Eng A 2015;626:505–13. https://doi.org/10.1016/j.msea.2014.12.077.10.1016/j.msea.2014.12.077 ↗