Development of a user-friendly drilling evaluation database system of CFRP
Source abstract
Abstract
Abstract The drilling process of carbon fiber reinforced plastics (CFRP) is the main secondary processing in the entire production cycle. However, there is no standard theory that could be used to estimate the hole quality and to quantify the assessment. Therefore, in this article, several influential factors of drilling quality, such as drilling parameters and materials, were utilized to establish the classification tree model. A comprehensive evaluation model [three-dimensional (3D) evaluation factor] was presented to measure and quantify the quality of the hole. Then a series of experiments were designed based on existing conditions. Further, a mathematical software (Origin) was used to fit and analyze the relationships of the drilling parameters and the 3D evaluation factor. Then a user-friendly drilling database system of CFRP was established based on the historical data of drilling experiments and the fitting function. In addition, in order to contrast the optimization results of the fitting function, the drilling experiments have been conducted, and the results have verified that the drilling database system could optimally predict the drilling schemes with a minor error.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Aerospace Engineering , Shenyang Aerospace University , Shenyang, Liaoning , China
Key Laboratory of Fundamental Science for National Defense of Aeronautical Manufacturing Process , Shenyang Aerospace University , Shenyang, Liaoning China
School of Aerospace Engineering , Shenyang Aerospace University , Shenyang, 110136 Liaoning , China , Phone: +86 18804087780
Liaoning Key Laboratory of Advanced Polymer Matrix Composites Manufacturing Technology , Shenyang , Liaoning China
School of Aerospace Engineering , Shenyang Aerospace University , Shenyang, 110136 Liaoning , China , Phone: +86 13032426148
Funding
National Natural Science Foundation of China
References (31)
Show source-provided references
1. Eneyew ED, Ramulu M. J. Mater. Res. Technol. 2014, 3, 354–362.10.1016/j.jmrt.2014.10.00310.1016/j.jmrt.2014.10.003 ↗
2. Shyha I, Soo SL, Aspinwall D, Bradley S. J. Mater. Process. Technol. 2010, 210, 1023–1034.10.1016/j.jmatprotec.2010.02.01110.1016/j.jmatprotec.2010.02.011 ↗
3. Gaitonde VN, Karnik SR, Rubio JC, Correia AE, Abrão AM, Davim JP. J. Mater. Process. Technol. 2008, 203, 431–438.10.1016/j.jmatprotec.2007.10.05010.1016/j.jmatprotec.2007.10.050 ↗
4. Kim D, Ramulu M. Compos. Struct. 2004, 63, 101–114.10.1016/S0263-8223(03)00137-510.1016/S0263-8223(03)00137-5 ↗
5. Bosco MAJ, Palanikumar K, Prasad BD, Velayudham A. Procedia. Eng. 2013, 51, 758–763.10.1016/j.proeng.2013.01.10810.1016/j.proeng.2013.01.108 ↗
6. Tsao CC. Int. J. Adv. Manuf. Technol. 2008, 37, 23–28.10.1007/s00170-007-0963-610.1007/s00170-007-0963-6 ↗
7. Ramirez C, Poulachon G, Rossi F, M’Saoubi R. Procedia. CIRP 2014, 13, 163–168.10.1016/j.procir.2014.04.02810.1016/j.procir.2014.04.028 ↗
8. Hocheng H, Tsao CC. Int. J. Mach. Tools Manuf. 2006, 46, 1403–1416.10.1016/j.ijmachtools.2005.10.00410.1016/j.ijmachtools.2005.10.004 ↗
9. Won MS, Dharan CKH. J. Manuf. Sci. Eng. 2002, 124, 242–247.10.1115/1.144831710.1115/1.1448317 ↗
10. Iliescu D, Gehin D, Gutierrez ME, Girot F. Int. J. Mach. Tools Manuf. 2010, 50, 204–213.10.1016/j.ijmachtools.2009.10.00410.1016/j.ijmachtools.2009.10.004 ↗
11. Xu J, An Q, Chen M. Compos. Struct. 2014, 117, 71–82.10.1016/j.compstruct.2014.06.03410.1016/j.compstruct.2014.06.034 ↗
12. Hintze W, Hartmann D, Schütte C. Compos. Sci. Technol. 2011, 71, 1719–1726.10.1016/j.compscitech.2011.08.00210.1016/j.compscitech.2011.08.002 ↗
13. Li MJ, Soo SL, Aspinwall DK, Leahy W. Procedia CIRP 2014, 13, 399–404.10.1016/j.procir.2014.04.06810.1016/j.procir.2014.04.068 ↗
14. Madhavan V, Lipczynski G, Lane B, Whitenton E. J. Manuf. Process. 2014, 42, 431–442.10.1016/j.jmapro.2014.06.001 ↗
15. Yashiro T, Ogawa T, Sasahara H. Int. J. Mach. Tools Manuf. 2013, 70, 63–69.10.1016/j.ijmachtools.2013.03.00910.1016/j.ijmachtools.2013.03.009 ↗
16. Capello E. J. Mater. Process. Technol. 2004, 148, 186–195.10.1016/S0924-0136(03)00812-410.1016/S0924-0136(03)00812-4 ↗
17. Tsao CC, Hocheng H. Int. J. Mach. Tools Manuf. 2005, 45, 1261–1270.10.1016/j.ijmachtools.2005.01.01510.1016/j.ijmachtools.2005.01.015 ↗
18. Tsao CC. Int. J. Mach. Tools Manuf. 2007, 47, 2172–2176.10.1016/j.ijmachtools.2007.05.00810.1016/j.ijmachtools.2007.05.008 ↗
19. Belingardi G, Koricho EG, Beyene AT. Compos. Struct. 2013, 102, 237–249.10.1016/j.compstruct.2013.03.00610.1016/j.compstruct.2013.03.006 ↗
20. Phadnis VA, Makhdum F, Roy A, Silberschmidt VV. Compos. Part A Appl. Sci. Manuf. 2013, 47, 41–51.10.1016/j.compositesa.2012.11.02010.1016/j.compositesa.2012.11.020 ↗
21. Wang G-D, Melly SK, Ahmed SKK. Sci. Eng. Compos. Mater. 2018, 25, 555–563.10.1515/secm-2016-016110.1515/secm-2016-0161 ↗
22. Zitoune R, Collombet F, Lachaud F, Piquet R, Pasquet P. Compos. Sci. Technol. 2005, 65, 455–466.10.1016/j.compscitech.2004.09.02810.1016/j.compscitech.2004.09.028 ↗
23. Davim JP, Rubio JC, Abrao AM. Compos. Sci. Technol. 2007, 67, 1939–1945.10.1016/j.compscitech.2006.10.00910.1016/j.compscitech.2006.10.009 ↗
24. Karimi NZ, Minak G, Kianfar P. Compos. Struct. 2015, 131, 107–114.10.1016/j.compstruct.2015.04.02510.1016/j.compstruct.2015.04.025 ↗
25. Jin PJ, Kim GW, Kang YL. Compos. Struct. 2005, 68, 391–397.10.1016/j.compstruct.2004.04.004
26. Casillas J, Cordón O, Jesus MJD, Herrera V. Inf. Sci. 2001, 136, 135–157.10.1016/S0020-0255(01)00147-510.1016/S0020-0255(01)00147-5 ↗
27. Liu ZQ, Huang CZ, Wan Y, Xing AI. Comput. Integr. Manuf. Syst. 2003, 9, 937–943. (In Chinese).
28. Cus F, Mursec B. J. Mater. Process. Technol. 2004, s157–158(4), 75–81.10.1016/j.jmatprotec.2004.09.007 ↗
29. Bao Y, Gao H, Li F. Researches on drilling CFRP (carbon fiber reinforced plastics) with diamond electroplated drill bit. Diamond Abr. Eng. 2009, 3, 38–42. (In Chinese).
30. Senthilkumar M, Prabukarthi A, Krishnaraj V. Procedia Eng. 2013, 64, 582–592.10.1016/j.proeng.2013.09.13310.1016/j.proeng.2013.09.133 ↗
31. Mao Z, Bourrier F, Stokes A, Fourcaud T. Ecol. Modell. 2014, 273, 11–22.10.1016/j.ecolmodel.2013.10.01710.1016/j.ecolmodel.2013.10.017 ↗