Microstructure and corrosion properties of SiC/Al-Mg-Cu-Si-Sn composites
Source abstract
Abstract
Abstract The SiC/Al-Mg-Cu-Si-Sn composites with different quantities of SiC particles by volume were fabricated using hot-pressing sintering. The effects of SiC volume fraction on the microstructure, Vickers hardness, and corrosion behavior of the composites were studied using the optical microscope, scanning electron microscope, Vickers hardness test, and corrosion testing. The results show that adding SiC particles shortened the time required to reach the peak-aged state of the composites and increased the hardness. Corrosion potentials of the composites did not vary greatly or show any definite trends in relation to the amounts of the SiC contents.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Powder Metallurgy , Central South University , Changsha 410083 , China
State Key Laboratory of Powder Metallurgy , Central South University , Changsha 410083 , China , Phone: +86-731-88877880, Fax: +86-731-88710855
References (24)
Show source-provided references
1. Chawla N, Shen YL. Adv. Eng. Mater. 2001, 3, 357–370.10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
2. Díaz-Ballote L, Velva L, Pech-Canul MA, Pech-Canul MI, Wipf DO. J. Electrochem. Soc. 2004, 151, B299–B303.10.1149/1.1737384 ↗
3. Lakshmipathy J, Kulendran B. Sci. Eng. Compos. Mater. 2014, 22, 573–582.10.1515/secm-2013-0268 ↗
4. Pech-Canul MI, Escalera-Lozano R, Pech-Canul MA, Rendón-Angeles JC, López-Cuevas J. Mater. Corros. 2007, 58, 833–840.10.1002/maco.200704067 ↗
5. Gupta M, Lu L, Ang SE. J. Mater. Sci. 1997, 32, 1261–1267.10.1023/A:1018596221106 ↗
6. Lu YX, Lee CS, Meng XM. J. Mater. Sci. Lett. 1999, 18, 533–535.10.1023/A:1006614225269 ↗
7. Sun C, Shen RJ, Song M. J Mater. Eng. Perform. 2012, 21, 373–381.10.1007/s11665-011-9940-1 ↗
8. Escalera-Lozano R, Pech-Canul MA, Pech-Canul MI, Quintana P. Mater. Corros. 2009, 60, 683–689.10.1002/maco.200805164 ↗
9. Escalera-Lozano R, Pech-Canul MI, Pech-Canul MA, Montoya-Dávila M, Uribe-Salas A. Open Corros. J. 2010, 3, 73–79.10.2174/1876503301003010073 ↗
10. Pech-Canul MA, Giridharagopal R, Pech-Canul MI, Coral-Escobar EE. J. Mater. Eng. Perform. 2013, 22, 3922–3932.10.1007/s11665-013-0674-0 ↗
11. Tekmen C, Cocen U. J. Mater. Sci. Lett. 2003, 22, 1247–1249.10.1023/A:1025497816387 ↗
12. Woo KD, Zhang DL. Curr. Appl. Phys. 2004, 4, 175–178.10.1016/j.cap.2003.11.002 ↗
13. El-baradie ZM, El-Shahat OA. J. Mater. Process. Tech. 1998, 79, 1–8.10.1016/S0924-0136(97)00096-4 ↗
14. Sheu CY, Lin SJ. J. Mater. Sci. 1997, 32, 1741–1747.10.1023/A:1018576000575 ↗
15. Tham JM, Da-Costa CE, Velasco F. J. Mater. Process. Tech. 2003, 133, 203–206.10.1016/S0924-0136(02)00234-0 ↗
16. Rack HJ. Proc. 6th. Int. Conf. on Composite Materials, Matthews, FL, Buskell, NCR, Eds., Elsevier Applied Science, 1987, Vol. 2, p 382.
17. Ahn HK, Yu CH. Metals Mater. Int. 2001, 7, 1–7.10.1007/BF03026930 ↗
18. Mohmad SBS. Adv. Perform. Mater. 1996, 3, 183–204.10.1007/BF00136745 ↗
19. Naya J, Hebbar KR. Trans. Indian Inst. Met. 2008, 61, 221–224.10.1007/s12666-008-0006-5 ↗
20. Asgharzadeh H, Simchi A. Powder Metall. 2009, 52, 28–35.10.1179/174329008X286721 ↗
21. Xiao DH, Geng ZW, Chen L, Wu Z, Diao HY, Song M, Zhou PF. Metall. Mater. Trans. A 2015, 46, 4793–4803.10.1007/s11661-015-3053-7 ↗
22. Hong SK, Tezuka H, Kamio A. J Japan Inst. Light Metal 1993, 43, 328–331.10.2464/jilm.43.328 ↗
23. Hihara LH, Latanium RM. Corrosion, 1992, 48, 546–552.10.5006/1.3315972 ↗
24. Zakaria HM. Ain Shams Eng. J. 2014, 5, 831–838.10.1016/j.asej.2014.03.003 ↗