Investigation of the influence of recyclate content on Poisson number of composites
Source abstract
Abstract
Abstract Composite materials are used in many industries. Their mechanical and physical properties as well as their low weight make them suitable for use in many constructions. Their wide application generates a problem with their disposal. Therefore, it is necessary to design new materials based on waste from polyester–glass laminates in order to introduce a closed circuit in the composite production process. The article presents research aimed at determining solid material composites with polyester–glass recyclate, in order to use these materials for modeling the structure. The aim of this study was to determine the effect of the addition of recyclate to the polyester–glass composite on the deformation and the value of the Poisson number of the material. During the study, samples from composites with the addition of polyester–glass recyclate were used. Samples made in accordance with the standard for plastics PN-EN ISO 527-4_2000P were subjected to static tensile test on a universal testing machine, with variable load parameters. During the test, the longitudinal and transverse elongations of the samples were measured using a strain gauge measuring system. On the basis of the measurements, the values of Poisson numbers were determined, which allowed for a preliminary assessment of the impact of the recyclate content in the composite on its deformability.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Natural Fiber Reinforced Composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Gdynia Maritime University, Faculty of Marine Engineering , Morska Str. 81-87 , 81-225 Gdynia , Poland
References (32)
Show source-provided references
1. Kyzioł L, Jastrzębska M. Determination of selected mechanical properties of composite waste materials. Logistyka. 2015;3:2758–63.
2. Królikowski W. Polymer structural composites. Warsaw: Scientific Publishing House PWN; 2012.
3. Panasiuk K. Analiza właściwości mechanicznych kompozytów warstwowych z recyklatem poliestrowo-szklanym. Gdynia: Publishing House of Gdynia Maritime University; 2019.
4. Kyzioł L, Panasiuk K, Hajdukiewicz G, Dudzik K. Acoustic emission and K–S metric entropy as methods for determining mechanical properties of composite materials. Sensors. 2021;21:145. 10.3390/s21010145.10.3390/s21010145 ↗
5. Rutecka M, Śleziona J, Myalski J. Estimation of possibility of using polyester–glass fiber recyclate in laminates production. Composites. 2004;9:56–60.
6. Żakowska H. Packaging waste recycling systems – selected legal, organizational and economic problems in Poland. Polimery. 2012;57:613–9.10.14314/polimery.2012.613 ↗
7. Rodrigues VD, Kennedy VR, Milena CC. Strategy and management for the recycling of carbon fiber-reinforced polymers (CFRPs) in the aircraft industry: a critical review. Int J Sustain Dev World Ecol. 2017;214–23.10.1080/13504509.2016.1204371 ↗
8. Kowalska E, Wielgosz Z, Bartczak T. Utilization of waste polyester–glass laminates. Polimery. 2002;47(2):110–6.10.14314/polimery.2002.110 ↗
9. Pickering S. Recycling technologies for thermoset composite materials—current status. Compos Part A: Appl Sci Manuf. 2006;37:1206–15.10.1016/j.compositesa.2005.05.030 ↗
10. Jeziórska R, Wierz-Motysia B, Szadkowska A. Modifiers for recycling of polymeric materials: production, properties and application. Polimery. 2010;55:748–56.10.14314/polimery.2010.748 ↗
11. Asmatulu E, Twomey J, Overcash M. Recycling of fiber-reinforced composites and direct structural composite recycling concept. J Composite Mater. 2014;48:593–608.10.1177/0021998313476325 ↗
12. Wong KH, Pickering SJ, Rudd CD. Recycled carbon fibre reinforced polymer composite for electromagnetic interference shielding. Composite Part A: Appl Sci Manuf. 2010;41:693–702.10.1016/j.compositesa.2010.01.012 ↗
13. Oliveux G, Dandy LO, Leeke GA. Current status of recycling of fibre reinforced polymers: review of technologies, reuse and resulting properties. Prog Mater Sci. 2015;72:61–99.10.1016/j.pmatsci.2015.01.004 ↗
14. Zahid B, Chen X. Manufacturing of single-piece textile reinforced riot helmet shell from vacuum bagging. J Composite Mater. 2013;47:2343–51.10.1177/0021998312457703 ↗
15. Kyzioł L, Panasiuk K, Barcikowski M, Hajdukiewicz G. The influence of manufacturing technology on the properties of layered composites with polyester–glass recyclate additive. Prog Rubber, Plast Recycling Technol. 2020;36(1):18–30. 10.1177/1477760619895003.10.1177/1477760619895003 ↗
16. Kyzioł L, Panasiuk K, Hajdukiewicz G. The influence of granulation and content of polyester–glass waste on properties of composites. J Kones. 2018;4(25):223–9. 10.5604/01.3001.0012.4795.
17. Mrówka M, Woźniak A, Nowak J, Wróbel G, Sławski S. Determination of mechanical and tribological properties of silicone-based composites filled with manganese waste. Materials. 2021;14:4459. 10.3390/ma14164459.10.3390/ma14164459 ↗
18. Mrówka M, Woźniak A, Prężyna S, Sławski S. The influence of zinc waste filler on the tribological and mechanical properties of silicone-based composites. Polymers. 2021;13:585. 10.3390/polym13040585.10.3390/polym13040585 ↗
19. Kyzioł L. Analiza właściwości drewna konstrukcyjnego nasyconego powierzchniowo polimerem MM. Gdynia: Publishing house of the Naval Academy; 2004.
20. Kyzioł L. Drewno modyfikowane na konstrukcje morskie. Gdynia: Publishing house of the Naval Academy; 2010.
21. Kyzioł L. Determining strength of the modified wood. Pol Marit Res. 2008;2(56):40–5. 10.2478/v10012-007-0063-410.2478/v10012-007-0063-4 ↗
22. Jayne BA. Theory and design of wood and fiber composite materials. New York: Syracuse University Press; 1972.
23. Rocens KA. Technologičeskije regulirovanie svojstv dreviesiny. Riga: Zinatyje Press; 1979.
24. Panasiuk K, Kyzioł L, Abramczyk N, Hajdukiewicz G. The impact of polyester-glass recyclate on the hardness and structure of composites. Sci J Marit Univ Szczec. 2019;59(131):22–6. 10.17402/348.10.2478/kones-2019-0108 ↗
25. Jacob A. Composites can be recycled. Reinf Plast. 2011;55(3):45–6.10.1016/S0034-3617(11)70079-0 ↗
26. Gucma M, Bryll K, Gawdzińska K, Przetakiewicz W, Piesowicz E. Technology of single polymer polyester composites and proposals for their recycling. Sci J Marit Univ Szczec. 2015;44(116):14–8.
27. Błędzki AK, Gorący K, Urbaniak M. Possibilities of recycling and utlisation of the polymeric materials and composite products. Polimery. 2012;57:620–6.10.14314/polimery.2012.620 ↗
28. Barcikowski M, Królikowski W. Effect of resin modification on the impact strength of glass-polyester. Polimery. 2013;58(3):450–60.10.14314/polimery.2013.450 ↗
29. Baltazar K Technologie wytwarzania kompozytów polimerowych cz.1. http://www.baltazarkompozyty.pl/index.php?option=com_content&view=article&id=224:technologie-wytwarzania-kompozytow-polimerowych-cz-1&catid=15&Itemid=46 (2018, accessed 11 February 2020).
30. Reczek M, Skalski M, Baier A. Pomiary odkształceń materiałów kompozytowych z zastosowaniem metod eksperymentalnych oraz modelowych. Wybrane Problemy Inżynierskie; 2010.
31. Roliński Z. Tensometria oporowa: podstawy teoretyczne i przykłady zastosowań. Warszawa: WNT; 1981.
32. Hyla I, Śleziona J. Kompozyty: elementy mechaniki i projektowania. Gliwice: Wydawnistwo Politechniki Śląskiej; 2004.