Properties of PVA-reinforced cement-bonded fiberboards processed with calender extrusion
Source abstract
Abstract
Abstract This research investigates the application of calender extrusion as a novel technique in the production of cement fiberboards. The technique is successfully used in the production of non-structural building elements. The properties of the produced composites are discussed in this paper, particularly with regards the polyvinyl alcohol (PVA) fiber used in the study. The research involves an experiment to examine the mechanical properties and microstructure of the composites, and the results indicate that calender extrusion is a promising method for the production of thin and wide cement composites. These products can be shaped into various three-dimensional forms in the green state after processing. Based on the results, the mechanical properties of cement-bonded fiberboards vary with processing direction due to the alignment of fibers. Fiber content is the most significant factor with regards the tensile and flexural properties of fiber-reinforced cementitious products processed with calender extrusion. Moreover, processed composites have adequate screw head pull-through and freeze-thaw resistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Istanbul Technical University, Faculty of Civil Engineering, 34469, Maslak, Istanbul, Turkey
References (25)
Show source-provided references
1. Brookes AJ, Meijs M, Cladding of Buildings, Taylor & Francis Group: London, UK, 2008, p 210.10.4324/978020309978010.4324/9780203099780 ↗
2. Kuder KG, Shah SP. Construct. Build. Mater. 2011, 24, 181–186.10.1016/j.conbuildmat.2007.06.01810.1016/j.conbuildmat.2007.06.018 ↗
3. Jamshidi M, Ramezanianpour AA. Construct. Build. Mater. 2011, 25, 298–302.10.1016/j.conbuildmat.2010.06.02610.1016/j.conbuildmat.2010.06.026 ↗
4. Bentur A, Mindess S. Fiber Reinforced Cementitious Composites. Elsevier: London, 1990.
5. Pye AM. J. Hazard. Mater. 1997, 3, 125–147.10.1016/0304-3894(79)80001-110.1016/0304-3894(79)80001-1 ↗
6. Ikai S, Reichert JR, Rodrigues AV, Zampieri VA. Construct. Build. Mater. 2010, 24, 171–180.10.1016/j.conbuildmat.2009.06.01910.1016/j.conbuildmat.2009.06.019 ↗
7. Nelson PK, Li VC, Asce F, Kamada T. J. Mater. Civ. Eng. 2002, 14, 384–391.10.1061/(ASCE)0899-1561(2002)14:5(384)10.1061/(ASCE)0899-1561(2002)14:5(384) ↗
8. Morton JH, Akers SAS, Cooke T. In Proc. Of IIBCC 10th Int. Inorganic Bonded Fiber Composites Conf, Sao Paulo Brazil, 2006, pp 168–177.
9. Tonoli GHD, Joaquim AP, Arsene MA, Bilba K, Savastano Jr H. Mater. Manufac. Proc. 2007, 22, 149–156.10.1080/1042691060106206510.1080/10426910601062065 ↗
10. Ansari FA, Bihari V, Rastogi SK, Ashquin M, Ahmad I. Ind J Occup Environ. Med. 2007, 11, 15–20.10.4103/0019-5278.3245910.4103/0019-5278.32459 ↗
11. Atahan HN, Pekmezci BY, Tuncel EY. J. Mater. Civ. Eng. 2013, 25, 1438–1445.10.1061/(ASCE)MT.1943-5533.000069110.1061/(ASCE)MT.1943-5533.0000691 ↗
12. Zhang C, Yuan X, Wu L, Sheng J. Eur. Polym. J. 2005, 41, 423–432.10.1016/j.eurpolymj.2004.10.02710.1016/j.eurpolymj.2004.10.027 ↗
13. Hassan CM, Pennas NA. Adv. Polym. Sci.2000, 153, 37–65.
14. Patachia S, Lobo VMM, Valente AFM, Poly(vinyl alcohol) (PVA)-Based Polymer Membranes, Nova Science Publishers: New York, 2009.
15. Shao Y, Marikunte S, Shah SP. Concrete Int. 1995, 17, 48–52.10.1520/CCA10336J
16. Shao Y, Shah SP. In Proc. 4th Mat. Eng. Conf., ASCE: Virginia, USA, 1996, pp 251–260.
17. Peled A, Cyr M, Shah SP. ACI Mater. J. 2000, 97, 509–517.
18. Burke PL, Shah SP. ACI SP-190 High Performance Fiber Reinforced Concrete Thin Sheet Products, ACI: Farmington Hills, USA, 1999, pp 133–164.
19. Aldea C, Marikunte S, Shah SP. Advn. Cem. Bas. Mat. 1998, 8, 47–55.10.1016/S1065-7355(98)00006-610.1016/S1065-7355(98)00006-6 ↗
20. Sancak A. Application of Extrusion Technique on Cement-based Materials, MSc Thesis, ITU Institute of Science and Technology: Istanbul, 2010.
21. Ozen M. Durability Properties of Extruded Cement-based Materials, MSc Thesis, ITU Institute of Science and Technology: Istanbul, 2010.
22. Qian X, Zhou X, Mu B, Li Z. Cem. Conc. Res. 2003, 33, 1575–1581.10.1016/S0008-8846(03)00108-X10.1016/S0008-8846(03)00108-X ↗
23. Zhou X, Li Z. J. Mater. Civ. Eng. 2005, 17, 28–35.10.1061/(ASCE)0899-1561(2005)17:1(28)10.1061/(ASCE)0899-1561(2005)17:1(28) ↗
24. ASTM D1037–12, Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials, 2012.
25. ASTM C1185–08, Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards, 2008.