journal article·2021-09-03Open access

Investigation on the acoustic properties of structural gradient 316L stainless steel hollow spheres composites

Chunhe Wang, Chunhuan Guo, Fengchun Jiang

Abstract

Abstract In this study, a kind of structural gradient metal hollow spheres composites (SG-MHSCs) were fabricated using two kinds of 316L stainless steel hollow spheres with different diameters and A356 aluminum through the casting method. Then the density of the SG-MHSCs was measured by the direct measurement; the microstructure of the SG-MHSCs was characterized by the Scanning Electron Microscope. Meanwhile, the acoustic performance of MHSCs was tested by the impedance tube, and the sound absorption and insulation mechanism SG-MHSCs were discussed and analyzed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Acoustic Wave Phenomena Research · Cellular and Composite Structures · Composite Structure Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Ministry of Education College of Material Science and Chemical Engineering, Key Laboratory of Superlight Materials & Surface Technology, Ministry of Education, Harbin Engineering University , Harbin , 150001 , China

Yantai Research Institute and Graduate School of HEU, Harbin Engineering University , Yantai , 264000 , China

References (39)

Show source-provided references
1. Rabiei A, O’Neill AT. A study on processing of a composite metal foam via casting. Mater Sci Eng A. 2005;404:159–64.10.1016/j.msea.2005.05.089 ↗
2. Rabiei A, Vendra L, Reese N, Young N, Neville BP. Processing and characterization of a new composite metal foam. Mater Trans. 2006;47:2148–53.10.2320/matertrans.47.2148 ↗
3. Gupta N, Rohatgi PK. Metal matrix syntactic foams: processing micro-structure, properties and applications. New York: DES Tech Publications Inc; 2014.
4. Mondal DP, Jha N, BadkulS A, Das S, Khedle R. High temperature compressive deformation behaviour of aluminum syntactic foam. Mater Sci Eng A. 2012;534:521–9.10.1016/j.msea.2011.12.002 ↗
5. Santa Maria JA, Schultz BF, Ferguson JB, Rohatgi PK. Al-Al2O3 syntactic foams -Part I: effect of matrix strength and hollow sphere size on the quasi-static properties of Al-A206/Al2O3 syntactic foams. Mater Sci Eng A. 2013;582:415–22.10.1016/j.msea.2013.05.081 ↗
6. Ferguson JB, Maria JAS, Schultz B, Rohatgi PK. Al-Al2O3 syntactic foams – Part II: predicting mechanical properties of metal matrix syntactic foams reinforced with ceramic spheres. Mater Sci Eng A. 2013;582:423–32.10.1016/j.msea.2013.06.065 ↗
7. Zou LC, Zhang Q, Pang BJ, Wu GH, Jiang LT, Su H. Dynamic compressive behavior of aluminum matrix syntactic foam and its multilayer structure. Mater Des. 2013;45:555–60.10.1016/j.matdes.2012.08.015 ↗
8. Balch DK, O’Dwyer JG, Davis GR. Plasticity and damage in aluminum syntactic foams deformed under dynamicand quasi-static conditions. Mater Sci Eng A. 2005;391:408–17.10.1016/j.msea.2004.09.012 ↗
9. Hartmann M, Reindel K, Singer RF. Fabrication and properties of syntactic magnesium foams. MRS Proc. 1998;521:211.10.1557/PROC-521-211 ↗
10. Luong DD, Shunmugasamy VC, Gupta N, Lehmhus D, Weise J, Baumeister J. Quasi-static and high strain rates compressive response of iron and Invar matrix syntactic foams. Mater Des. 2015;66:516–31.10.1016/j.matdes.2014.07.030 ↗
11. Mondal DP, Majumder JD, Jha N, Badkul A, Das S, Patel A, et al. Titanium-cenosphere syntactic foam made through powder metallurgy route. Mater Des. 2012;34:82–9.10.1016/j.matdes.2011.07.055 ↗
12. Daoud A. Synthesis and characterization of novel ZnAl22 syntactic foam composites via casting. Mater Sci Eng A. 2008;488:281–95.10.1016/j.msea.2007.11.020 ↗
13. Lehmhus D, Weise J, Baumeister J, Peroni L, Scapin M, Fichera C, et al. Quasi-static and dynamic mechanical performance of glass micro-sphere- and cenosphere-based 316L syntactic foams. Proced Mater Sci. 2014;4:383–7.10.1016/j.mspro.2014.07.578 ↗
14. Peroni L, Scapin M, Avalle M, Weise J, Lehmhus D. Dynamic mechanical behavior of syntactic iron foams with glass microspheres. Mater Sci Eng A. 2012;552:364–75.10.1016/j.msea.2012.05.053 ↗
15. Marx J, Rabiei A. Overview of composite metal foams and their properties and performance. Adv Eng Mater. 2017;19:1600776.10.1002/adem.201600776 ↗
16. Chen S, Marx J, Rabiei A. Experimental and computational studies on the thermal behavior and fire retardant properties of composite metal foams. Int J Therm Sci. 2016;106:70–9.10.1016/j.ijthermalsci.2016.03.005 ↗
17. Wang C, Jiang F, Shao S, Yu T, Guo C. Acoustic properties of 316L stainless steel hollow sphere composites fabricated by pressure casting. Metals. 2020;10(8):1047.10.3390/met10081047 ↗
18. Yu T, Jiang F, Wang J, Wang Z, Guo C. Acoustic insulation and absorption mechanism of metallic hollow spheres composites with different polymer matrix. Compos Struct. 2020;248:112566.10.1016/j.compstruct.2020.112566 ↗
19. Chen S, Bourham M, Rabiei A. Attenuation efficiency of X-ray and comparison to gamma ray and neutrons in composite metal foams. Radiat Phys Chem. 2015;117:12–22.10.1016/j.radphyschem.2015.07.003 ↗
20. Chen S, Bourham M, Rabiei A. Neutrons attenuation on composite metal foams and hybrid open-cell Al foam. Radiat Phys Chem. 2015;109:27–39.10.1016/j.radphyschem.2014.11.003 ↗
21. Marx J, Portanova M, Rabiei A. A study on blast and fragment resistance of composite metal foams through experimental and modeling approaches. Compos Struct. 2018;194:652–61.10.1016/j.compstruct.2018.03.075 ↗
22. Xia X, Zhang Z, Zhao W, Li C, Ding J, Liu C, et al. Acoustic properties of closed-cell aluminum foams with different macrostructures. J Mater Sci Technol. 2017;33:1227–34.10.1016/j.jmst.2017.07.012 ↗
23. Li Y, Wang X, Wang X, Ren Y, Han F, Wen C. Sound absorption characteristics of aluminum foam with spherical cells. J Appl Phys. 2011;110:559.10.1063/1.3665216 ↗
24. Bao HQ, Zhang N, Hou XG. Analysis of the influence of static flow resistance on the sound absorption properties of aluminum foam. Adv Mater. 2012;535–537:1459–62.10.4028/www.scientific.net/AMR.535-537.1459 ↗
25. Sun JX, Duan CY, Liu PS. Sound absorption characterization of aluminum foam made by press infiltration casting multidiscip. Model Mater Struct. 2016;12:737–47.10.1108/MMMS-03-2016-0010 ↗
26. Liu PS, Qing HB, Hou HL. Primary investigation on sound absorption performance of highly porous titanium foams. Mater Des. 2015;85:275–81.10.1016/j.matdes.2015.06.118 ↗
27. Ko YH, Son HT, Cho JI, Kang CS, Oh IH, Lee JS, et al. Investigation on the sound absorption and transmission for aluminum foam and its composite. Solid State Phenomena. 2007;124-126:1825–8.10.4028/www.scientific.net/SSP.124-126.1825 ↗
28. Zhou R, Crocker MJ. Sound transmission loss of foam-filled honeycomb sandwich panels using statistical energy analysis and theoretical and measured dynamic properties. J Sound Vib. 2010;329(6):673–86.10.1016/j.jsv.2009.10.002 ↗
29. Naebe M, Shirvanimoghaddam K. Functionally graded materials: a review of fabrication and properties. Appl Mater Today. 2016;5:223–45.10.1016/j.apmt.2016.10.001 ↗
30. Birman V, Byrd LW. Modeling and analysis of functionally graded materials and structures. Appl Mech Rev. 2007;60(5):195.10.1115/1.2777164 ↗
31. Yu T, Jiang F, Wang C, Cao M, Guo C. Investigation on fabrication and microstructure of Ti-6Al-4V alloy hollow spheres by powder metallurgy. Met Mater Int. 2019;27:1083–91.10.1007/s12540-019-00462-5 ↗
32. Komatsu T. Improvement of the Delany-Bazley and Miki models for fibrous sound-absorbing materials. Acoust Sci Technol. 2008;29:121–9.10.1250/ast.29.121 ↗
33. Rabiei A, Garcia-Avila M. Effect of various parameters on properties of composite steel foams under variety of loading rates. Mater Sci Eng A. 2013;564:539–47.10.1016/j.msea.2012.11.108 ↗
34. Chakravarty I, Gupta SP. Formation of intermetallics during brazing of alumina with Fe, Ni and Cr using Ag-30 Cu-10Sn as filler metal. Mater Charact. 2003;51:235–41.10.1016/j.matchar.2003.12.001 ↗
35. Viala JC, Peronnet M, Barbeau F, Bosselet F, Bouix J. Interface chemistry in aluminium alloy castings reinforced with iron base inserts. Compos Part A: Appl Sci Manufac. 2002;33:1417–20.10.1016/S1359-835X(02)00158-6 ↗
36. Gupta TMP. Intermetallic compound formation in Fe–Al–Si ternary system: Part II. Mater Charact. 2002;49:293–311.10.1016/S1044-5803(03)00005-6 ↗
37. Lu TJ, Hess A, Ashby MF. Sound absorption in metallic foams. J Appl Phys. 1999;85(11):7528–39.10.1063/1.370550 ↗
38. Ghose J, Sharma V, Kumar S. Acoustic absorption characteristics of closed cell aluminium foam. Appl Mech Mater 201210(116):1145–9.10.4028/www.scientific.net/AMM.110-116.1145 ↗
39. Yu H, Yao G, Wang X, Liu Y, Li H. Sound insulation property of Al–Si closed-cell aluminum foam sandwich panels. Appl Acoust. 2007;68(11):1502–10.10.1016/j.apacoust.2006.07.019 ↗