Effect of Cutting Temperature on Bending Properties of Carbon Fibre Reinforced Plastics
Source abstract
Abstract
Abstract High cutting temperatures are easily generated during the machining of carbon fibre reinforced plastics (CFRP) and can induce serious damage during machining such as delamination. The purpose of this paper is to study the influence of cutting temperature on the performance of CFRP after machining. CFRP specimens were heated to temperatures within the vicinity of cutting temperatures generated during machining, then air-cooled and their bending properties investigated. The results showed that temperature had significant influence on the bending stress of CFRP. With increasing temperature, bending stress decreased and was lowest when the temperature was close to the glass-transition temperature. It was concluded that the bending properties of CFRP could be seriously affected if the material temperature was close to the glass-transition temperature and maintained for a period. As a result, cutting temperature should be kept lower than the glass transition temperature during machining.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Advanced machining processes and optimization · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory of Fundamental Science for National Defense of Aeronautical Digital Manufacturing Process Shenyang Aerospace University , Shenyang , Liaoning 110136 , China
References (24)
Show source-provided references
1. Sorrentino, L., Turchetta, S., Bellini, C. In process monitoring of cutting temperature during the drilling of FRP laminate (2017) Composite Structures, 168, pp. 549-561. DOI: 10.1016/j.compstruct.2017.02.07910.1016/j.compstruct.2017.02.079 ↗
2. Saoudi, J., Zitoune, R., Mezlini, S., Gururaja, S., Seitier, P. Critical thrust force predictions during drilling: Analytical modeling and X-ray tomography quantification (2016) Composite Structures, 153, pp. 886-894. DOI: 10.1016/j.compstruct.2016.07.01510.1016/j.compstruct.2016.07.015 ↗
3. V Antonucci, M Giordano, L Nicolais. Effect of the Segmental Mobility Restriction on the Thermoset Chemical Kinetics[J]. Journal of Polymer Science: Part A: Polymer Chemistry, 2002, 40(21): 3757-377010.1002/pola.1047110.1002/pola.10471 ↗
4. Foreman JP, Porter D, Behzadi S, et al Predicting the thermo-meehanical properties of an epoxy resin blend as a function of temperature and strain rate[J]. Composites Part A: Applied Science and Manufacturing. 2010, 41(9): 1072-1076.10.1016/j.compositesa.2009.10.01510.1016/j.compositesa.2009.10.015 ↗
5. Koyanagi J, Yoneyama S, Nemoto A, et al Time and temperature dependence of carbon/epoxy interface strength[J]. Composites Science and Technology. 2010, 70(9): 1395-1400.10.1016/j.compscitech.2010.04.01910.1016/j.compscitech.2010.04.019 ↗
6. Dong Lu, et al Cutting simulation of carbon fiber reinforced resin matrix composite material based on macroscopic anisotropy [J]. Acta Materiae Compositae Sinica, 2014, 31(3):584-590.
7. Xiaojiang Cai, et al Experimental study on cutting force and heat variation and surface quality evaluation based on anisotropy of composites. Shanghai Jiao Tong University.2014
8. Linhui Ouyang et al Effect analysis of temperature environment on composite structure mechanical properties. Northwestern Polytechnical University.2015
9. Morkavuk S, Uğur Köklü, Mehmet Bağcı, et al Cryogenic machining of carbon fiber reinforced plastic (CFRP) composites and the effects of cryogenic treatment on tensile properties: A comparative study[J]. Composites Part B Engineering, 2018, 147.10.1016/j.compositesb.2018.04.024 ↗
10. Sahin OS, Akdemir A, Avci A, et al Fatigue Crack Growth Behavior of Filament Wound Composite Pipes in Corrosive Environment[J]. Journal of Reinforced Plastics and Composites, 2009, 28(24):2957-2970.10.1177/073168440809406810.1177/0731684408094068 ↗
11. Gemi L, Sinan Ahin, Akdemir A. Experimental investigation of fatigue damage formation of hybrid pipes subjected to impact loading under internal pre-stress[J]. Composites Part B: Engineering, 2017, 119:196-205.10.1016/j.compositesb.2017.03.05110.1016/j.compositesb.2017.03.051 ↗
12. Experimental investigation of fatigue damage formation of hybrid pipes subjected to impact loading under internal pre-stress. Composites Part B: Engineering. 2017; 119:196-205.10.1016/j.compositesb.2017.03.051 ↗
13. Gemi L, Necmettin Tarakçioğlu, Akdemir A, et al Progressive fatigue failure behavior of glass/epoxy (±75) filament-wound pipes under pure internal pressure[J]. Materials & Design, 2009, 30(10):4293-4298.10.1016/j.matdes.2009.04.02510.1016/j.matdes.2009.04.025 ↗
14. Yashiro, T., Ogawa, T., & Sasahara, H. (2013). Temperature measurement of cutting tool and machined surface layer in milling of CFRP. International Journal of Machine Tools and Manufacture, 70, 63-69.10.1016/j.ijmachtools.2013.03.00910.1016/j.ijmachtools.2013.03.009 ↗
15. Othman M I A, Lotfy K, Farouk R M. Generalized thermomicrostretch elastic mediumwith temperature dependent properties for different theories[J]. Engineering Analysis with Boundary Elements, 2010, 34(3):229-237.10.1016/j.enganabound.2009.10.00310.1016/j.enganabound.2009.10.003 ↗
16. Liding Wang. Polymer micro-nanofabrication technology[M]. National Defense Industry Press, 2012.
17. Qi Z, Geubelle PH, Li M. Dimensional accuracy of thermoset composites: Simulation of process-induced residual stresses [J]. Journal of Composite Materials, 2001, 35(3): 188-20110.1106/NHUB-BXGK-4X8L-777F ↗
18. Ou Y, Zhu D. Tensile behavior of glass fiber reinforced composite at different strain rates and temperatures[J]. Construction & Building Materials, 2015, 96:648-656.10.1016/j.conbuildmat.2015.08.04410.1016/j.conbuildmat.2015.08.044 ↗
19. Sharma D, Paterson M J. The structure and UV spectroscopy of benzene-water (Bz-W6) clusters using time-dependent density functional theory[J]. Photochemical & Photobiological Sciences Oflcial Journal of the European Photochemistry Association & the European Society for Photobiology, 2014, 13(11):1549.10.1039/C4PP00211C10.1039/c4pp00211c ↗
20. Hawileh R A, Abu-Obeidah A, Abdalla J A, et al Temperature effect on the mechanical properties of carbon, glass and carbon– glass FRP laminates[J]. Construction & Building Materials, 2015, 75:342-348.10.1016/j.conbuildmat.2014.11.02010.1016/j.conbuildmat.2014.11.020 ↗
21. Ramazan K, Yusuf A. Compression after impact behavior of laminated composite plates subjected to low velocity impact in high temperatures[J]. Composite Structures, 2009, 89: 77-82.10.1016/j.compstruct.2008.07.00210.1016/j.compstruct.2008.07.002 ↗
22. Huang X, Suzuki K, Chino Y, et al Improvement of stretch formability of Mg–3Al–1Zn alloy sheet by high temperature rolling at finishing pass[J]. Journal of Alloys & Compounds, 2011,509(28):7579-7584.10.1016/j.jallcom.2011.04.13210.1016/j.jallcom.2011.04.132 ↗
23. Tainter C J, Skinner J L. The water hexamer: Three-body interactions, structures, energetics, and OH-stretch spectroscopy at finite temperature[J]. Journal of Chemical Physics, 2012, 137(10):104304.10.1063/1.474615710.1063/1.4746157 ↗
24. Jin Y L, Kim J, Han ML, et al Structures, vibrational frequencies, and infrared spectra of the hexa-hydrated benzene clusters[J]. Journal of Chemical Physics, 2000, 113(15):6160-6168.10.1063/1.130855310.1063/1.1308553 ↗