Elasto-plastic analysis and finite element simulation of thick-walled functionally graded cylinder subjected to combined pressure and thermal loading
Source abstract
Abstract
Abstract An exact analytical elasto-plastic solution for thick-walled cylinder made of functionally graded materials (FGMs) subjected to combined pressure and thermal loading is presented in this paper. It is assumed that the cylinder is bonded at both ends, the material is radially graded and complies with the elastic perfectly plastic behavior. The relations in determining the plastic zone radius as well as the radial, circumferential, longitudinal and effective stresses in both elastic and plastic zones are obtained for any combined loading condition. Moreover, using ABAQUS/Explicit software, the functionally graded (FG) cylinder is simulated in every respect. Comparison of the present theoretical results with those from a finite element simulation illustrates the accuracy of the present analysis.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Composite Structure Analysis and Optimization · Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical and Aerospace Engineering, Science and Research Branch , Islamic Azad University , Tehran , Iran
School of Mechanical Engineering, College of Engineering , University of Tehran , Tehran , Iran
References (29)
Show source-provided references
1. Müller E, Drašar C, Schilz J, Kaysser WA. Mater. Sci. Eng. A 2003, 362, 17–30.10.1016/S0921-5093(03)00581-1 ↗
2. Mahmoudi T, Parvizi A, Poursaeidi E, Rahi A. J. Mech. Sci. Technol. 2015, 29, 1–8.10.1007/s12206-015-0914-3 ↗
3. Suresh S, Mortensen A. Fundamentals of Functionally Graded Materials, IOM Communications Ltd.: London, 1998.
4. Aboudi J, Pindera MJ, Arnold SM. Int. J Solids Struct. 1995, 32, 1675–1710.10.1016/0020-7683(94)00201-7 ↗
5. Schulz U, Peters M, Bach FW, Tegeder G. Mater. Sci. Eng. A 2003, 362, 61–80.10.1016/S0921-5093(03)00579-3 ↗
6. Kieback B, Neubrand A, Riedel H. Mater. Sci. Eng. A 2003, 362, 81–106.10.1016/S0921-5093(03)00578-1 ↗
7. Fukui YY, Yamanaka N. JSME Int. J., Ser. I 1992, 35, 379–385.10.1299/jsmea1988.35.4_379 ↗
8. Tutuncu N, Ozturk M. Composites, Pt. B 2001, 32, 683–686.10.1016/S1359-8368(01)00041-5 ↗
9. Liew KM, Kitipornchai S, Zhang XZ, Lim CW. Int. J. Solids Struct. 2003, 40, 2355–2380.10.1016/S0020-7683(03)00061-1 ↗
10. Jabbari M, Sohrabpour S, Eslami MR. Int. J. Pressure Vessels Piping 2002, 79, 493–497.10.1016/S0308-0161(02)00043-1 ↗
11. Tarn JQ. Int. J. Solids Struct. 2001, 38, 8189–8206.10.1016/S0020-7683(01)00182-2 ↗
12. Oral A, Anlas G. Int. J. Solids Struct. 2005, 42, 5568–5588.10.1016/j.ijsolstr.2005.02.044 ↗
13. Shao ZS. Int. J. Pressure Vessels Piping 2005, 82, 155–163.10.1016/j.ijpvp.2004.09.007 ↗
14. Shao ZS, Ma GW. Int. J. Compos. Struct. 2008, 83, 259–265.10.1016/j.compstruct.2007.04.011 ↗
15. Abrinia K, Naee H, Sadeghi F, Djavanroodi F. Am. J. Appl. Sci. 2008, 7, 852–859.10.3844/ajassp.2008.852.859 ↗
16. Nie GJ, Zhong Z, Batra RC. Int. J. Compos. Sci. Technol. 2011, 71, 666–673.10.1016/j.compscitech.2011.01.009 ↗
17. Mehrabadi SJ, Aragh BS. Int. J. Compos. Struct. 2013, 96, 773–785.10.1016/j.compstruct.2012.09.036 ↗
18. Pitakthapanaphong S, Busso EP. J. Mech. Phys. Solids 2002, 50, 695–716.10.1016/S0022-5096(01)00105-3 ↗
19. Shabana YM, Noda N. Composites, Pt. B 2001, 32, 111–121.10.1016/S1359-8368(00)00049-4 ↗
20. Aboudi J, Pindera M, Arnold S. J. Therm Stress. 1996, 19, 809–861.10.1080/01495739608946210 ↗
21. Cho JR, Choi JH. Europ. J. Mech. A Solids 2004, 23, 271–281.10.1016/j.euromechsol.2003.11.004 ↗
22. Akis T, Eraslan N. J. Acta Mechanica 2006, 187, 169–187.10.1007/s00707-006-0374-z ↗
23. Ozturk A, Gulgec M. J. Eng. Sci. 2011, 49, 1047–1061.10.1016/j.ijengsci.2011.06.001 ↗
24. Parvizi A, Naghdabadi R, Arghavan J. J. Therm. Stresses 2011, 34, 1054–1070.10.1080/01495739.2011.605934 ↗
25. Sadeghian M, Ekhteraei Toussi H. J. Basic Appl. Sci. Res. 2012, 2, 10246–10257.
26. Hosseini Kordkheili SA, Naghdabadi R. J. Therm. Stresses 2008, 31, 1–17.10.1080/01495730701737803 ↗
27. Ruhi M, Angoshtari A, Naghdabadi R. J. Therm. Stresses 2005, 28, 391–408.10.1080/01495730590916623 ↗
28. Cho JR, Ha DY. Mater. Sci. Eng. A 2001, 302, 187–196.10.1016/S0921-5093(00)01835-9 ↗
29. Rodríguez-Castro R, Wetherhold RC, Kelestemur MH. Mater. Sci. Eng. A 2002, 323, 445–456.10.1016/S0921-5093(01)01400-9 ↗