Cushioning energy absorption of regular polygonal paper corrugation tubes under axial drop impact
Source abstract
Abstract
Abstract The paper corrugation tube is an attractive and innovative mode of cushioning protection and energy absorption for the general protection and packaging technology of military and civil products. The aims of this paper focus on the dynamic compression characteristics of four kinds of regular polygonal paper corrugation tubes under the conditions of axial drop impacts, and the influence rules of structural parameters and load parameters on the dynamic cushioning energy absorption. The results show that, the tube direction has a crucial effect on the deformation mode of the paper corrugation tubes, the deformation of X-direction paper corrugation tubes has a stable accordion mode, but that of Y-direction paper corrugation tubes is a mixture of steady progressive buckling and other non-ideal modes. The X-direction paper corrugation tubes have lower peak stress, stable and controllable deformation mode with multiple folds, and higher total energy absorption, unit area energy absorption, specific energy absorption and stroke efficiency than the Y-direction paper corrugation tubes. Moreover, the change of cross-section shape of X-direction paper corrugation tubes has no obvious influence on the total energy absorption, while the total energy absorption of Y-direction paper corrugation tube obviously rises with the increase of the number of cross-section edges of the tubes, but the unit area energy absorption, specific energy absorption and stroke efficiency decrease with the increase of the number of cross-section edges of the tubes. Moreover, the increase of the number of cross-section edges of the tubes made the total energy absorption of Y-direction tubes rise, while the total energy absorption of X-direction tubes has no obvious change. But the unit area energy absorption, specific energy absorption and stroke efficiency decrease with the increase of the number of cross-section edges of the tubes. Furthermore, the tube length, impact block mass and impact energy have also important influence on the cushioning energy absorption of the paper corrugation tubes under axial drop impact.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Material Properties and Processing · Cellular and Composite Structures · Fluid Dynamics Simulations and Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Xi’an University of Technology Xi’an , Xi’an China
References (22)
Show source-provided references
1. Hohe J, Becker W. Effective stress-strain relations for two-dimensional cellular sandwich cores: homogenization, material models, and properties [J]. Applied Mechanics Review, 2002, 55(1): 61-8710.1115/1.1425394 ↗
2. Sims G L A, Bennett J A. Cushioning performance of flexible polyurethane foams[J]. Polymer Engineering & Science, 2010, 38(1):134-14210.1002/pen.10173 ↗
3. Darvizeh A, Meshkinzar A, Alitavoli M, Rajabiehfard R. Low velocity impact of empty and foam filled circumferentially grooved thick-walled circular tubes[J]. Thin–Walled Structures, 2017, 110: 97-10510.1016/j.tws.2016.09.002 ↗
4. Nia A A, Sadeghi M Z. The effects of foam filling on the compressive response of hexagonal cell aluminum honeycombs under axial loading-experimental study[J]. Materials and Design, 2010, 31(3):1216-123010.1016/j.matdes.2009.09.030 ↗
5. Yazici M,Wright J, Bertin D, Shukla A. Experimental and numerical study of foam filled corrugated core steel sandwich structures subjected to blast loading[J]. Composite Structures, 2014, 110: 98-10910.1016/j.compstruct.2013.11.016 ↗
6. Naganathan P, He J, Kirkpatrick J. Effect of compression of enclosed air on the cushioning properties of corrugated fiber-board[J]. Packaging Technology and Science, 1999, 12(2): 81-9110.1002/(SICI)1099-1522(199903/04)12:2<81::AID-PTS456>3.0.CO;2-7 ↗
7. Guo Yanfeng, Xu Wencai, Fu Yungang, et al. Dynamic shock cushioning characteristics and vibration transmissibility of X-PLY corrugated paperboard[J]. Shock and Vibration, 2011, 18(4): 525-53510.1155/2011/578265 ↗
8. Guo Yanfeng, Xu Wencai, Fu Yungang, et al. Comparison studies on dynamic packaging properties of corrugated paperboard pads[J]. Journal of Engineering, 2010, 2(5): 378-38610.4236/eng.2010.25049 ↗
9. Fu Yungang, Guo Yanfeng, Wang Zhongmin. Compression deformation and energy absorption properties of corrugated paperboard[J]. Transactions of China Pulp and Paper, 2015, 30(3): 31-35 (in Chinese)
10. Wang Zhiwei, E Yuping. Energy absorption properties of multi-layered corrugated paperboard in various ambient humidities [J]. Materials and Design, 2011, 32: 3476–3485.10.1016/j.matdes.2011.01.059 ↗
11. Wang Bo, Zhou Caihua. The imperfection-sensitivity of origami crash boxes[J]. International Journal of Mechanical Sciences, 2017, 121: 58-6610.1016/j.ijmecsci.2016.11.027 ↗
12. Qiu Xinming, Pan Mingle, Yu Xiaohuan, Wang Wei, Liu Yuzhe. Analysis of the energy absorption properties for tubular structure under axial compression of different failure models [J]. Mechanics in Engineering, 2016, 38(5): 477-492 (in Chinese)
13. Xiang Yanfei, Yu Tongxi, Yang Liming. Comparative analysis of energy absorption capacity of polygonal tubes, multi-cell tubes and honeycombs by utilizing key performance indicators[J].Materials and Design, 2016, 89: 689-69610.1016/j.matdes.2015.10.004 ↗
14. Li zhibin, Yu jilin, Zheng zhijun, Guo Liuwei. An experimental study on the crashworthiness of thin-walled tubes and their metallic foam-filled structures [J]. Journal of Experimental Mechanics, 2012, 27(1): 77-85 (in Chinese)
15. Hanssen A G, Langseth M, Hopperstad O S. Static and dynamic crushing of square aluminium extrusions with aluminium foam filler [J]. International Journal of Impact Engineering, 2000, 24(4): 347-38310.1016/S0734-743X(99)00169-4 ↗
16. Shahbeyk S, Petrinic N, Vafai A. Numerical modelling of dynamically loaded metal foam-fllled square columns[J]. International Journal of Impact Engineering, 2007, 34(3): 573-58610.1016/j.ijimpeng.2005.11.005 ↗
17. Liu Zhifang, Hao Wenqian, Xie Jiamiao, et al. Axial-impact buckling modes and energy absorption properties of thin-walled corrugated tubes with sinusoidal patterns[J]. Thin-Walled Structures, 2015, 94: 410-42310.1016/j.tws.2015.05.002 ↗
18. Zhang Ping, Ma Jian, Na Jingxin. Theoretical study on the crash-worthiness of corrugated tube [J]. Journal of Mechanical Strength, 2015, 37(4): 676-681 (in Chinese)
19. Hao Wenqian, Lu Jinshuai, Huang Rui, Liu Zhifang, Wang Zhihua. Buckling and energy absorption properties of thin-walled corrugated tubes under axial impacting [J]. Explosion and Shock Waves, 2015, 35(3): 380-385. (in Chinese)
20. Xu Shucai, Zou Meng, Wei Caigang, et al. Axial crashworthiness analysis and optimization of a bionic thin-walled tube based on bamboo structure [J]. Journal of Tsinghua University (Science and Technology), 2014(3):299-304 (in Chinese)
21. Zhang Xiong, Wen Zhuzhu, Zhang Hui. Axial crushing and optimal design of square tubes with graded thickness[J]. Thin-Walled Structures, 2014, 84(84): 263-27410.1016/j.tws.2014.07.004 ↗
22. Gao Meng, Xu Peng. Pressing-crack energy absorption for aluminum foam filled aluminum shell under high value impact [J]. Ordnance Material Science and Engineering, 2016, 39(1): 45-49 (in Chinese)