The effect of temperature on the tensile properties and failure mechanisms of two-dimensional braided composites
Source abstract
Abstract
Abstract Two-dimensional (2D) braided composites have excellent structural integrity and damage tolerance. Currently, there are few researches focused on the effect of temperature on tensile failure behaviors of 2D braided composites. In this study, 2D biaxial braided composites with different fiber materials were prepared, and the tensile properties and failure mechanisms of these braided composites at different temperatures were studied by means of the tensile test and the high-definition charge coupled device optical microscope. The results show that temperature has significant effects on the tensile properties and fracture damage of 2D braided composites. As the temperature increases, the tensile properties of the two braided composites decrease obviously, and their external fracture failure becomes subtle, while their internal deformation damage becomes significant. Moreover, the differences between the two fibers in tensile fracture behaviors of composites can be more conspicuously observed at higher temperatures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Advanced ceramic materials synthesis · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Textiles and Fashion, Shanghai University of Engineering Science , Shanghai 201620 , China
An Hui Province International Cooperation Research Center of Textile Structure Composites, Anhui Polytechinc University , Wuhu 241000 , P.R. China
References (32)
Show source-provided references
1. Cagri A, Jason C. 2D braided composites: A review for stiffness critical applications. Compos Struct. 2008;85(1):43–58.10.1016/j.compstruct.2007.10.004 ↗
2. Haejoong N, Luis T, Byoung HY. A study of the mechanical properties of biaxial and triaxial braided composites for an automotive propeller shaft. Fiber Polym. 2022;23(9):2712–8.10.1007/s12221-022-0061-2 ↗
3. Heieck F, Hermann F, Middendorf P, Schladitz K. Influence of the cover factor of 2D biaxial and triaxial braided carbon composites on their in-plane mechanical properties. Compos Struct. 2017;163:114–22.10.1016/j.compstruct.2016.12.025 ↗
4. Amit R, Harshvardhan S, Apurv S. Tensile response of braided structures: a review. Text Res J. 2015;85(19):2083–96.10.1177/0040517515576331 ↗
5. Böhm R, Hornig A, Luft J, Becker M, Koch I, Grüber B, et al. Experimental investigation of the strain rate dependent behaviour of 2D biaxially and triaxially reinforced braided composites. Appl Compos Mater. 2014;21(2):285–99.10.1007/s10443-013-9338-3 ↗
6. Huang ZM. Efficient approach to the structure-property relationship of woven and braided fabric-reinforced composites up to failure. J Reinf Plast Comp. 2005;24(12):1289–309.10.1177/0731684405049860 ↗
7. Heim FM, Daspit JT, Holzmond OB, Croom BP, Li X. Analysis of tow architecture variability in biaxially braided composite tubes. Compos Part B-Eng. 2020;190(C):107938.10.1016/j.compositesb.2020.107938 ↗
8. Heim FM, Daspit JT, Li X. Quantifying the effect of tow architecture variability on the performance of biaxially braided composite tubes. Compos Part B-Eng. 2020;201:108383.10.1016/j.compositesb.2020.108383 ↗
9. Afzali NM, Safar JM. An experimental study of the fiber hybridization effect on the mechanical performance of the 2D braided tubular composites. Mater Res Express. 2019;6(11):115315.10.1088/2053-1591/ab45ba ↗
10. Cheung BKO, Carey JP. Improving two-dimensional braided composite tensile properties by including low angle yarn twist: Production, experimental verification, and modeling. J Eng Fiber Fabr. 2020;15:155892502094644.10.1177/1558925020946449 ↗
11. Lepp EA, Carey JP. An examination of initial structural degradation in tubular braided composites through region-by-region strain analysis. J Eng Fiber Fabr. 2020;15:155892502097832.10.1177/1558925020978325 ↗
12. Zhao Z, Liu P, Dang H, Nie H, Guo Z, Zhang C, et al. Effects of loading rate and loading direction on the compressive failure behavior of a 2D triaxially braided composite. Int J Impact Eng. 2021;156:103928.10.1016/j.ijimpeng.2021.103928 ↗
13. Pan Z, Ouyang W, Wang M, Xiao J, Wu Z. In-plane compression failure mechanism of two-dimensional triaxial braided composite (2DTBC) material subjected to different load directions. Mech Mater. 2021;161:104001.10.1016/j.mechmat.2021.104001 ↗
14. Unlusoy C, Melenka GW. Flexural testing of cellulose fiber braided composites using three dimensional digital image correlation. Compos Struct. 2019;230(C):111538.10.1016/j.compstruct.2019.111538 ↗
15. Jiang H, Ren Y, Liu Z, Zhang S, Yu G. Multi-scale analysis for mechanical properties of fiber bundle and damage characteristics of 2D triaxially braided composite panel under shear loading. Thin Wall Struct. 2018;132:276–86.10.1016/j.tws.2018.08.022 ↗
16. Abbas A, Garrett W. Experimental evaluation of carbon fibre, fibreglass and aramid tubular braided composites under combined tension–torsion loading. Compos Struct. 2021;269:114049.10.1016/j.compstruct.2021.114049 ↗
17. Qu P, Guan X, Jia Y, Lou S, Nie J. Effective elastic properties and stress distribution of 2D biaxial nonorthogonally braided composites. J Compos Mater. 2012;46(8):997–1008.10.1177/0021998311413684 ↗
18. Böhm R, Hornig A, Weber T, Grüber B, Gude M. Experimental and numerical impact analysis of automotive bumper brackets made of 2D triaxially braided CFRP composites. Materials. 2020;13(16):3554.10.3390/ma13163554 ↗
19. Li D, Han W, Jiang L. On the tensile properties and failure mechanisms of 3D six-directional braided composites at elevated temperatures. Compos Commun. 2021;28:100884.10.1016/j.coco.2021.100884 ↗
20. Zuo H, Li D, Jiang L. Transverse bending fatigue behaviors and failure mechanisms of 3D five-directional braided composites at different temperatures. Mater Lett. 2022;316:132030.10.1016/j.matlet.2022.132030 ↗
21. Dell’Isola F, Giorgio I, Pawlikowski M, Rizzi NL. Large deformations of planar extensible beams and pantographic lattices: heuristic homogenization, experimental and numerical examples of equilibrium. P Roy Soc A-Math Phy. 2016;472(2185):1–23.10.1098/rspa.2015.0790 ↗
22. Dell’Isola F, Seppecher P, Alibert JJ, Lekszycki T, Grygoruk R, Pawlikowski M, et al. Pantographic metamaterials: an example of mathematically driven design and of its technological challenges. Contin Mech Therm. 2019;31(4):851–84.10.1007/s00161-018-0689-8 ↗
23. Tornabene F, Viscoti M, Dimitri R, Aiello MA. Higher-order modeling of anisogrid composite lattice structures with complex geometries. Eng Struct. 2021;244:112686.10.1016/j.engstruct.2021.112686 ↗
24. Morozov EV, Lopatin AV, Nesterov VA. Finite-element modelling and buckling analysis of anisogrid composite lattice cylindrical shells. Compos Struct. 2011;93(2):308–23.10.1016/j.compstruct.2010.09.014 ↗
25. Guyader G, Gabor A, Hamelin P. Analysis of 2D and 3D circular braiding processes: Modeling the interaction between the process parameters and the pre-form architecture. Mech Mach Theory. 2013;69:90–104.10.1016/j.mechmachtheory.2013.04.015 ↗
26. Xu L, Kim SJ, Ong CH, Ha SK. Prediction of material properties of biaxial and triaxial braided textile composites. J Compos Mater. 2012;46(18):2255–70.10.1177/0021998311431353 ↗
27. Melenka GW, Carey JP. Experimental analysis of diamond and regular tubular braided composites using three-dimensional digital image correlation. J Compos Mater. 2017;51(28):3887–907.10.1177/0021998317695418 ↗
28. Swolfs Y, Gorbatikh L, Verpoest I. Fibre hybridisation in polymer composites: A review. Compos Part A-Appl S. 2014;67:181–200.10.1016/j.compositesa.2014.08.027 ↗
29. Peiyuan Z, Dharun VS, Anastasios PV. Review of hybrid composites fatigue. Compos Struct. 2021;274:114358.10.1016/j.compstruct.2021.114358 ↗
30. China Building Materials Federation. General Rules for Performance Test Methods of Fiber Reinforced Plastics. GB/T 1446-2005.2005-05-18 (in Chinese).
31. China Building Materials Federation. Test Method for Tensile Properties of Fiber Reinforced Plastics. GB/T 1447-2005.2005-05-18 (in Chinese).
32. China Building Materials Federation. Test Method for Properties of Resin Castings. GB/T 2567-2021.2021-08-20 (in Chinese).