Buckling analysis of thin-walled metal liner of cylindrical composite overwrapped pressure vessels with depressions after autofrettage processing
Source abstract
Abstract
Abstract The cylindrical filament wound composite overwrapped pressure vessels (COPV) with metal liner has been widely used in spaceflight due to their high strength and low weight. After the autofrettage process, the plastic deformation of the metal liner is constrained by composite winding layers, which introduce depressions to the metal liner that causes local buckling. To predict the local buckling of the inner liner with depressions of the pressure vessel after the autofrettage process, a local buckling analysis method for the metal liner of COPV was developed in this article. The finite element method is used to calculate the overall stress distribution in the pressure vessel before and after the autofrettage process, and the influence of local depressions on the buckling is evaluated. The axial buckling of the pressure vessel under external pressure is analyzed. The control equation of the metal liner with depressions is developed, considering the changes in the pressure and the bending moment of the liner depressions and its vicinity during the loading and unloading process. Taking the cylindrical COPV (38 L) with aluminum alloy liner as an example, the effects of liner thickness, liner radius, the thickness-to-diameter ratio, autofrettage pressure, and the length of straight section on the autofrettage process are discussed. The results show that the thickness of the inner liner has the most significant influence on the buckling of the liner, followed by the length of the straight section and the radius of the inner liner, while the autofrettage pressure has the least influence.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Silicone and Siloxane Chemistry · Dynamics and Control of Mechanical Systems · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Engineering Mechanics, Dalian University of Technology , Dalian 116024 , China
Beijing Chinatank Industry Co. Ltd , Beijing 100024 , China
National Key Laboratory of Combustion, Thermal Structure and Flow, Xi’an Aerospace Propulsion Institute , Xi’an 710125 , China
School of Materials Science and Engineering, Dalian University of Technology , Dalian 116024 , China
Department of Engineering Mechanics, The State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology , Dalian 116024 , China
References (47)
Show source-provided references
1. Holmes GA , Peterson RC , Hunston DL , McDonough WG . E-Glass/DGEBA/m-PDA single fiber composites: the effect of strain rate on interfacial shear strength measurements. Polym Compos. 2010;21(3):450–65.10.1002/pc.10201 ↗
2. Sjögren BA , Berglund LA . Toughening mechanisms in rubber-modified glass fiber/unsaturated polyester composites. Polym Compos. 1999;20(5):705–12.10.1002/pc.10394 ↗
3. Lei Z , Wang J , Li S . Influence of fiber slippage coefficient distributions on the geometry and performance of composite pressure vessels. Polym Compos. 2016;37(1):315–21.10.1002/pc.23183 ↗
4. Hwang TK , Kim HG . Experimental and analytical approach for the size effect on the fiber strength of CFRP. Polym Compos. 2013;34(4):598–606.10.1002/pc.22461 ↗
5. Verjenko VE , Adali S , Tabakov PY . Stress distribution in continuously heterogeneous thick laminated pressure vessels. Composite Struct. 2001;54(2/3):371–7.10.1016/S0263-8223(01)00112-X ↗
6. Krikanov AA . Composite pressure vessels with higher stiffness. Composite Struct. 2000;48(1):119–27.10.1016/S0263-8223(99)00083-5 ↗
7. Bai H , Yang B , Hui H , Yang Y , Yu Q , Zhou Z , et al. Experimental and numerical investigation of the strain response of the filament wound pressure vessels subjected to pressurization test. Polym Compos. 2019;40(5):4427–41.10.1002/pc.25304 ↗
8. Erkal S , Sayman O , Benli S , Dogan T , Cinar Yeni E . Fatigue damage in composite cylinders. Polym Compos. 2010;31(4):707–13.10.1002/pc.20850 ↗
9. Cohen D , Mantell SC , Zhao L . The effect of fiber volume fraction on filament wound composite pressure vessel strength. Compos Part B: Eng. 2001;32(5):413–29.10.1016/S1359-8368(01)00009-9 ↗
10. Madhavi M , Rao KVJ , Rao KN . Design and analysis of filament wound composite pressure vessel with integrated-end domes. Def Sci J. 2009;59(1):2289–97.10.14429/dsj.59.1488 ↗
11. Liu PF , Chu JK , Hou SJ , Xu P , Zheng JY . Numerical simulation and optimal design for composite high-pressure hydrogen storage vessel: a review. Renew Sust Energ Rev. 2012;16(4):1817–27.10.1016/j.rser.2012.01.006 ↗
12. CEN International Standard ISO11119 2 Gas Cylinders of Composite Construction specification and Test Methods part2: Fully Wrapped Fiber Reinforced Composite Gas Cylinders with Load sharing Metal Liners. Switzerland: ISO, 2002.
13. Chen A . Elasto-plastic analysis of residual stress in autofrettage sphere vessel. Chin J Appl Mech. 2008;25(3):512–6.
14. Lin S , Jia Z , Li W , Li S , Li X , Jia X . Performance study and finite element analysis of autofrettage pressure of thin-walled metal-lined composite gas cylinders. Composite Sci Eng. 2020;312(1):23–8.
15. Chen HW , Sun HK , Liu TC . Autofrettage analysis of a fibre-reinforced composite tube structure incorporated with a SMA. Composite Struct. 2009;89(4):497–508.10.1016/j.compstruct.2008.11.005 ↗
16. Jahromi BH , Farrahi GH , Maleki M , Nayeb-Hashemi H , Vaziri A . Residual stresses in autofrettaged vessel made of functionally graded material. Eng Struct. 2009;31(12):2930–5.10.1016/j.engstruct.2009.07.019 ↗
17. Lee HJ , Lee JJ , Huh JS . A simulation study on the thermal buckling behavior of laminated composite shells with embedded shape memory alloy (SMA) wires. Composite Struct. 1999;47(1–4):463–9.10.1016/S0263-8223(00)00020-9 ↗
18. Xia M , Takayanagi H , Kemmochi K . Analysis of multi-layered filament-wound composite pipes under internal pressure. Composite Struct. 2001;53(4):483–91.10.1016/S0263-8223(01)00061-7 ↗
19. Jahromi BH , Ajdari A , Nayeb-Hashemi H , Vaziri A . Autofrettage of layered and functionally graded metal–ceramic composite vessels. Composite Struct. 2010;92(8):1813–22.10.1016/j.compstruct.2010.01.019 ↗
20. Kobayashi S . Effect of autofrettage on durability of CFRP composite cylinders subjected to out-of-plane loading. Compos Part B. 2012;43(4):1720–6.10.1016/j.compositesb.2012.01.032 ↗
21. Parker AP . A re-autofrettage procedure for mitigation of Bauschinger effect in thick cylinders. J Press Vessel Technol. 2004;126(4):26–32.10.1115/1.1806446 ↗
22. Sun Z , Ren M , Chen H . An engineering algorithm of autofrettage technique for composite overwrapped pressure vessels with metal inner. Acta Materiae Compositae Sin. 2011;28(2):217–21.
23. Wang Z , Zhao J . Stress Analyses of CFRP cylinder under autofrettage process. Aerosp Mater & Technol. 2017;47(6):29–35.
24. Moon CJ , Kim IH , Choi BH , Kweon JH , Choi JH . Buckling of filament-wound composite cylinders subjected to hydrostatic pressure for underwater vehicle applications. Composite Struct. 2010;92(9):2241–51.10.1016/j.compstruct.2009.08.005 ↗
25. Aggarwal SC , Cooper MJ . External pressure testing of Insituform lining. Coventry (Lanchester) Polytechnic, Internal Report. Coventry, UK: 1984.
26. Yang FQ , Zhang TP , Liu ZD , Wang XY . Finite element modeling and buckling analysis of COPV. Vac Cryogenics. 2005;11(1):40–5.
27. Fu M , Lin S , Chen L , Zhou W. Liner buckling analysis of composite overwrapped pressure vessel. Mater Sci Technol. 2015;23(2):86–90.
28. Liang C . Numerical simulation of autofrettage and fatigue of filament wound pressure vessel. Aerosp Mater Technol. 2012;42(4):16–20.
29. Hu ZH , Liu HJ , Wang RG , He XD , Ma L . The study on buckling deformation of composite pressure vessel based on acoustic emission signals. Adv Mater Res. 2009;87–88:445–50.10.4028/www.scientific.net/AMR.87-88.445 ↗
30. Saulsberry RL. Private communication of results from experiments at NASA JSC White Sands Test Facility; 2007.
31. Phoenix S, Kezirian M. Analysis of potential Ti-liner buckling after proof in Kevlar/Epoxy COPV. AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, & Materials Conference; 2006.
32. Zhou W , Li C , Ma B , Najafi M . Buckling Strength of a Thin-Wall Stainless Steel Liner Used to Rehabilitate Water Supply Pipelines. J Pipeline Syst Eng Pract. 2016;7(1):4015017.10.1061/(ASCE)PS.1949-1204.0000212 ↗
33. Lo H , Bogdanoff JL , Goldberg JE , Crawford R . A buckling problem of a circular ring. In: Proceedings of the Fourth US National Congress of Applied Mechanics. 1962. p. 691–5.
34. Sun C , Shaw WJD , Vinogradov AM . One-way buckling of circular rings confined within a rigid boundary. J Press Vessel Technol. 1995;117(2):162–9.10.1115/1.2842105 ↗
35. Yamamoto Y , Matsubara N . Buckling strength of metal lining of a cylindrical pressure vessel. Bull JSME. 1969;12(51):421–9.10.1299/jsme1958.12.421 ↗
36. Yamamoto Y , Matsubara N . Buckling strength of steel cylindrical liners for waterway tunnels. Theor Appl Mech. 1981;30:225–35.
37. Wang R , Xiaodong HE , Zhaohui HU , Liu W , Shi J . Structure analysis of composite pressure vessel with ultra-thin metallic liner. Acta Materiae Compositae Sin. 2010;27(4):131–8.
38. Vasilikis D , Karamanos SA . Stability of confined thin-walled steel cylinders under external pressure. Int J Mech Sci. 2009;51(1):21–32.10.1016/j.ijmecsci.2008.11.006 ↗
39. Daniel V , Karamanos SA . Buckling design of confined steel cylinders under external pressure. J Press Vessel Technol. 2011;133(1):011205.10.1115/1.4002540 ↗
40. Nayak GC , Zienkiewicz OC . Elasto‐plastic stress analysis. A generalization for various contitutive relations including strain softening. Int J Numer Meth Eng. 2010;5(1):113–35.10.1002/nme.1620050111 ↗
41. De Lorenzis L , Wriggers P , Hughes TJR . Isogeometric contact: a review. GAMM-Mitteilungen. 2014;37(1):85–123.10.1002/gamm.201410005 ↗
42. Reddy JN . Theory and analysis of elastic plates and shells. J Am Chem Soc. 1999;99(2):633–4 (Second edn.).
43. Brush DO , Almroth BO , Hutchinson JW . Buckling of bars, plates, and shells. J Appl Mech. 1975;42(4):911.10.1115/1.3423755 ↗
44. Cao WH , Liu HB , Li XF . Optimization analysis of the injection molding process based on orthogonal test method and uniform design. Appl Mech Mater. 2013;401–403:863–6.10.4028/www.scientific.net/AMM.401-403.863 ↗
45. Zhao C , Chen X , Zhao C . Study on CO2 capture using dry potassium-based sorbents through orthogonal test method. Int J Greenh Gas Control. 2010;4(4):655–8.10.1016/j.ijggc.2009.12.010 ↗
46. Kang L , Dixon S , Wang K , Dai J . Enhancement of signal amplitude of surface wave EMATs based on 3-D simulation analysis and orthogonal test method. Ndt E Int. 2013;59:11–7.10.1016/j.ndteint.2013.05.003 ↗
47. Liu Z , Zhu R . Key parameters of pressure vessel auto-reinforcement technology and influence on auto-reinforcement technology. Chem Equip Technol. 2020;41(6):20–5.