Assessment of sand stabilization potential of a plant-derived biomass
Source abstract
Abstract
Abstract Lignin is a coproduct of biofuel and paper industries, which exhibits binding qualities when mixed with water. Lignin is an ideal candidate for a sustainable stabilization of unpaved roads. To this end, an experimental program was devised and carried out to quantify effects of lignin on compaction and early age shear strength behaviors of sand. Samples were prepared by mixing a particular type of coproduct called calcium lignosulfonate (CaL) with sand and water. Based on the extensive analyses of six series of strength tests, it was found that a normalized cohesion increased with an increasing normalized areas ratio. Normalizations were carried out by dividing the cohesion and area ratio by gravimetric CaL content whereby the area ratio was obtained by dividing the portion of the cross-sectional area occupied with lignosulfonate-water (CaL-W) paste by the total cross-sectional area. While the increase in the normalized cohesion eventually leveled out, the cohesion peaked at 6% of CaL. Thus, sand-CaL-water (S-CaL-W) mixes sustained larger shear stresses than dry sand for a range of normal stresses below the limiting normal stress. Consequently, the early age behavior indicates that adding CaL-W to sand is clearly beneficial in the near-surface applications in dry sand.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Geotechnical Engineering and Soil Stabilization · Lignin and Wood Chemistry · Wood Treatment and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Kansas State University, College of Engineering, Department of Civil Engineering, Manhattan, KS 66506-5000, USA
Union Pacific Railroad, Denver, CO 80221, USA
Kansas State University, Department of Biochemistry and Molecular Biophysics, Manhattan, KS 66506-5000, USA
Selcuk University,Technical Science College, Department of Construction, Konya 42075, Turkey
Afyon Kocatepe University Engineering Faculty, Department of Civil Engineering, ANS Campus, Afyonkarahisar 03200, Turkey
References (21)
Show source-provided references
1. Fox C. Chemical and Thermal Characterization of Three Industrial Lignins and Their Corresponding Lignin Esters, a thesis, University of Idaho, 2006, retrieved from http://www.cnrhome.uidaho.edu/documents/Thesis-Carter-Final.pdf&pid=106089&doc=1. Accessed on June 30, 2013.
2. Ragauskas A. Basics of Kraft Pulping and Recovery Process [PowerPoint Slides], Georgia Institute of Technology, Institute of Paper Science and Technology, 2011, retrieved from http://ipst.gatech.edu/faculty/ragauskas_art/technical_reviews/Kraft%20Pulping%20and%20Recovery%20Process%20basics.pdf. Accessed on June 30, 2013.
3. Adams JW. Environmental Effects of Applying Lignosulfonate to Roads(U05-01R). Research and Development, Daishowa Chemicals Inc 1988.
4. Stapanian M, Shea D. Int. J. Environ. Stud. 1986, 27, 45.10.1080/00207238608710276 ↗
5. DCN Digital Media. U.S. Concrete Works on Supplemental Materials to Replace Cement, Daily Commercial News and Construction Record, 2011, October 18, Retrieved from http://www.dcnonl.com/article/id47160/--us-concrete-works-on-supplemental-materials-to-replace-cement.
6. Borregaard, Lignotech. Norlig A Powder Product Description Sheet, 2008.
7. Santoni R, Tingle J, Webster S. Transportation Research Record 2002, 1787, 61–70.10.3141/1787-0710.3141/1787-07 ↗
8. Surdahl R, Woll J, Marquez R. Road Stabilizer Product Performance: Buenos Aires National Wildlife Refuge, Federal Highway Administration, Publication No. FHWA-CFL/TD-05-011, 2005.
9. Woll JH, Surdahl RW, Everett R, Andersen R. Road Stabilizer Product Performance: Seedskade National Wildlife Refuge, Technical Report, No. FHWA-CFL/TD-08-005, 2008.
10. Gopalakrishnan R, Ceylan H, Kim S. Biofuel Co-Product Uses for Pavement Geo-Materials Stabilization, IHRB Project TR-582 Final Report, Iowa State University, Institute for Transportation: Ames, Iowa, U.S, 2010.
11. Wang HJ, Li J, Lu XZ, Jin YC. J. Environ. Sci. 2005, 17, 650–654.
12. Surdahl R, Woll J, Everett R, Andresen R. Road Stabilizer Product Performance: Seedskadee National Wildlife Refuge, Federal Highway Administration, Publication No. FHWA-CFL/TD-08-005, 2008.
13. Ceylan H, Gopalakrishnan R, Kim S. J. Trans. Res. Board 2010, 2186, 130–137.10.3141/2186-1410.3141/2186-14 ↗
14. Kestler MUS. Stabilization Selection Guide for Aggregate- and Native-Surfaced Low Volume Roads. In: National Technology & Development Program, Department of Agriculture, Forest Service, 2009.
15. ASTM D2487. Standard Classification of Soils for Engineering Purposes (Unified Soil Classification System).
16. ASTM D422. Standard Test Method for Particle Size Analysis of Soils. In Annual Book of ASTM Standards, US, 2006.
17. ASTM D854. Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer. In Annual Book of ASTM Standards, US, 2006.
18. ASTM D4318. Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. In Annual Book of ASTM Standards, US, 2006.
19. ASTM D698. Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (Procedure A). In Annual Book of ASTM Standards, US, 2006.
20. ASTM D3080. Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions. In Annual Book of ASTM Standards, US, 2006.
21. Bartley PA. Experimental Investigation of The Sand-Stabilization Potential of A Plant-Derived Bio-Mass, MSc thesis, Kansas State University, Manhattan, Kansas, USA, 2009.