Influence of hydrothermal aging on the mechanical performance of foam core sandwich panels subjected to low-velocity impact
Source abstract
Abstract
Abstract The effect of hydrothermal aging on the impact resistance of foam core sandwich panels is studied in this study. The sandwich panels with glass fiber-reinforced skins and polyurethane foam core were fabricated and then were treated with different hydrothermal aging conditions. The moisture absorption characteristic of the composite skins was evaluated. A modified Fickian formulation was proposed to predict the moisture absorption behavior of composite skins. The low-velocity impact resistance of the aged sandwich panels was determined at three different impact energies. The impact responses including contact force, deflection, and dissipated energy of the sandwich panels with and without hydrothermal aging were analyzed. The macroscopic and microscopic damage morphologies were observed by visual inspection and scanning electron microscope methods, respectively. The damage mechanism of the aged panels was revealed. Results indicate that the impact resistance of aged sandwich panels is degraded, and the performance degradation is larger with increasing aging temperature. Compared to the panel without hydrothermal aging, the reduction of the contact force is 35.69%, and the increase of the deflection is 71.43% for the aged panel at 70°C aging temperature. The fiber/matrix interfacial cohesive performance is degraded resulting from the hydrothermal aging.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Mechanical Behavior of Composites · Structural Analysis of Composite Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Civil and Architecture Engineering, Nanchang Institute of Technology , Nanchang 330029 , China
References (36)
Show source-provided references
1. Leijten J, Bersee HE, Bergsma OK, Beukers A. Experimental study of the low-velocity impact behaviour of primary sandwich structures in aircraft. Compos Part A: Appl Sci Manuf. 2009;40(2):164–75.10.1016/j.compositesa.2008.10.019 ↗
2. Atas C, Sevim C. On the impact response of sandwich composites with cores of balsa wood and PVC foam. Composite Struct. 2010;93(1):40–8.10.1016/j.compstruct.2010.06.018 ↗
3. Atas C, Potoğlu U. The effect of face-sheet thickness on low-velocity impact response of sandwich composites with foam cores. J Sandw Struct & Mater. 2016;18(2):215–28.10.1177/1099636215613775 ↗
4. Golewski GL. On the special construction and materials conditions reducing the negative impact of vibrations on concrete structures. Mater Today: Proc. 2021;45:4344–8.10.1016/j.matpr.2021.01.031 ↗
5. Golewski GL. A novel specific requirements for materials used in reinforced concrete composites subjected to dynamic loads. Composite Struct. 2019;223:110939.10.1016/j.compstruct.2019.110939 ↗
6. Gemi L. Investigation of the effect of stacking sequence on low velocity impact response and damage formation in hybrid composite pipes under internal pressure. A comparative study. Compos Part B: Eng. 2018;153:217–32.10.1016/j.compositesb.2018.07.056 ↗
7. Özbek Ö, Bozkurt ÖY, Erkliğ A. Low velocity impact behaviors of basalt/epoxy reinforced composite laminates with different fiber orientations. Turkish J Eng. 2020;4(4):197–202.10.31127/tuje.644025 ↗
8. Hassoon OH, Tarfaoui M, Alaoui AEM, et al. Experimental and numerical investigation on the dynamic response of sandwich composite panels under hydrodynamic slamming loads. Composite Struct. 2017;178:297–307.10.1016/j.compstruct.2017.07.014 ↗
9. Gemi DS, Şahin ÖS, Gemi L. Experimental investigation of axial compression behavior after low velocity impact of glass fiber reinforced filament wound pipes with different diameter. Composite Struct. 2021;280:114929.10.1016/j.compstruct.2021.114929 ↗
10. Maziz A, Tarfaoui M, Gemi L, et al. A progressive damage model for pressurized filament-wound hybrid composite pipe under low-velocity impact. Composite Struct. 2021;276:114520.10.1016/j.compstruct.2021.114520 ↗
11. Kafodya I, Xian G, Li H. Durability study of pultruded CFRP plates immersed in water and seawater under sustained bending: water uptake and effects on the mechanical properties. Compos Part B: Eng. 2015;70:138–48.10.1016/j.compositesb.2014.10.034 ↗
12. Alessi S, Pitarresi G, Spadaro G. Effect of hydrothermal ageing on the thermal and delamination fracture behaviour of CFRP composites. Compos Part B: Eng. 2014;67:145–53.10.1016/j.compositesb.2014.06.006 ↗
13. Bergeret A, Ferry L, Ienny P. Influence of the fibre/matrix interface on ageing mechanisms of glass fibre reinforced thermoplastic composites (PA-6, 6, PET, PBT) in a hygrothermal environment. Polym Degrad Stab. 2009;94(9):1315–24.10.1016/j.polymdegradstab.2009.04.009 ↗
14. Popineau S, Rondeau-Mouro C, Sulpice-Gaillet C, Shanahan ME. Free/bound water absorption in an epoxy adhesive. Polymer. 2005;46(24):10733–40.10.1016/j.polymer.2005.09.008 ↗
15. Li X, Weitsman YJ. Sea-water effects on foam-cored composite sandwich lay-ups. Compos Part B: Eng. 2004;35(6–8):451–9.10.1016/j.compositesb.2004.04.012 ↗
16. Ghosh R, Ramakrishna A, Reena G, Ravindra A, Verma A. Water absorption kinetics and mechanical properties of ultrasonic treated banana fiber reinforced-vinyl ester composites. Procedia Mater Sci. 2014;5:311–5.10.1016/j.mspro.2014.07.272 ↗
17. Katzman HA, Castaneda RM, Lee HS. Moisture diffusion in composite sandwich structures. Compos Part A: Appl Sci Manuf. 2008;39(5):887–92.10.1016/j.compositesa.2008.01.005 ↗
18. Ray BC. Temperature effect during humid ageing on interfaces of glass and carbon fibers reinforced epoxy composites. J colloid interface Sci. 2006;298(1):111–7.10.1016/j.jcis.2005.12.023 ↗
19. Tsai YI, Bosze EJ, Barjasteh E, Nutt SR. Influence of hygrothermal environment on thermal and mechanical properties of carbon fiber/fiberglass hybrid composites. Compos Sci Technol. 2009;69(3–4):432–7.10.1016/j.compscitech.2008.11.012 ↗
20. Abbasi A, Hogg PJ. Temperature and environmental effects on glass fibre rebar: modulus, strength and interfacial bond strength with concrete. Compos Part B: Eng. 2005;36(5):394–404.10.1016/j.compositesb.2005.01.006 ↗
21. Lu Z, Xian G, Li H. Effects of exposure to elevated temperatures and subsequent immersion in water or alkaline solution on the mechanical properties of pultruded BFRP plates. Compos Part B: Eng. 2015;77:421–30.10.1016/j.compositesb.2015.03.066 ↗
22. Chabba S, Van Es M, Van Klinken EJ, Jongedijk MJ, Vanek D, Gijsman P, et al. Accelerated aging study of ultra high molecular weight polyethylene yarn and unidirectional composites for ballistic applications. J Mater Sci. 2007;42(8):2891–3.10.1007/s10853-007-1617-7 ↗
23. Wen SW, Xiao JY, Wang YR. Accelerated ageing behaviors of aluminum plate with composite patches under salt fog effect. Compos Part B: Eng. 2013;44(1):266–73.10.1016/j.compositesb.2012.05.024 ↗
24. Joshi N, Muliana A. Deformation in viscoelastic sandwich composites subject to moisture diffusion. Composite Struct. 2010;92(2):254–64.10.1016/j.compstruct.2009.07.021 ↗
25. Avilés F, Aguilar-Montero M. Mechanical degradation of foam-cored sandwich materials exposed to high moisture. Composite Struct. 2010;92(1):122–9.10.1016/j.compstruct.2009.07.004 ↗
26. Veazie DR, Robinson KR, Shivakumar K. Effects of the marine environment on the interfacial fracture toughness of PVC core sandwich composites. Compos Part B: Eng. 2004;35(6–8):461–6.10.1016/j.compositesb.2003.09.004 ↗
27. Manujesh BJ, Rao V, Aan MS. Moisture absorption and mechanical degradation studies of polyurethane foam cored E-glass-reinforced vinyl-ester sandwich composites. J Reinforced Plast Compos. 2014;33(5):479–92.10.1177/0731684413503720 ↗
28. Huo Z, Mohamed M, Nicholas JR, Wang X, Chandrashekhara K. Experimentation and simulation of moisture diffusion in foam-cored polyurethane sandwich structure. J Sandw Struct & Mater. 2016;18(1):30–49.10.1177/1099636215582218 ↗
29. Fang Y, Chen P, Huo R, Liang Y, Wang L, Liu W. Hygrothermal ageing of polymeric sandwich structures used in structural engineering. Constr Build Mater. 2018;165:812–24.10.1016/j.conbuildmat.2018.01.072 ↗
30. Ding A, Wang J, Ni A, Li S. Hygroscopic ageing of nonstandard size sandwich composites with vinylester-based composite faces and PVC foam core. Composite Struct. 2018;206:194–201.10.1016/j.compstruct.2018.08.031 ↗
31. Taraghi I, Fereidoon A. Non-destructive evaluation of damage modes in nanocomposite foam-core sandwich panel subjected to low-velocity impact. Compos Part B: Eng. 2016;103:51–9.10.1016/j.compositesb.2016.08.009 ↗
32. Liu J, He W, Xie D, Tao B. The effect of impactor shape on the low-velocity impact behavior of hybrid corrugated core sandwich structures. Compos Part B: Eng. 2017;111:315–31.10.1016/j.compositesb.2016.11.060 ↗
33. Li H, Wang Z, Yu Z, Sun M, Liu Y. The low velocity impact response of foam core sandwich panels with a shape memory alloy hybrid face-sheet. Materials. 2018;11(11):2076;10.3390/ma11112076 ↗
34. Wang J, Waas AM, Wang H. Experimental and numerical study on the low-velocity impact behavior of foam-core sandwich panels. Composite Struct. 2013;96:298–311.10.1016/j.compstruct.2012.09.002 ↗
35. Al-Shamary AKJ, Karakuzu R, Özdemir O. Low-velocity impact response of sandwich composites with different foam core configurations. J Sandw Struct & Mater. 2016;18(6):754–68.10.1177/1099636216653267 ↗
36. Yang B, Zhang J, Zhou L, Lu M, Liang W, Wang Z. Effect of fiber surface modification on water absorption and hydrothermal aging behaviors of GF/pCBT composites. Compos Part B: Eng. 2015;82:84–91.10.1016/j.compositesb.2015.08.056 ↗