Numerical study of Ti/Al/Mg three-layer plates on the interface behavior in explosive welding
Source abstract
Abstract
Abstract In this study, a finite element model of the explosive welding process of three-layer plates composed of Ti/Al/Mg was established, and the interfacial behaviors of three-layer plates were researched. We investigated the influences that affect the quality of explosive bonding and explored the influence factors of variable physical parameters in the simulation. The finite difference engineering package AUTODYN with the smoothed particle hydrodynamics method has been used to model the collision in this work. The von Mises strength model was used to describe the behavior of Ti/Al/Mg composite plates. Wave morphology on the Al/Mg interface and straight morphology on the Ti/Al interface were produced in this study; meanwhile, jet phenomenon occurred obviously in the simulation process. The contours of velocity, pressure, shear stress, and effective plastic strain of Ti/Al/Mg were also discussed. The result of X -direction velocity showed a delay in time and location of collision point between the Ti/Al and the Al/Mg interface. The detonation point was the minimum pressure, and the collision point was the maximum pressure compared with other sections. The value of effective plastic strain must exceed a threshold to obtain a good bonding, and the shear stress was of opposite sign in the simulation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Materials Science and Engineering , Taiyuan University of Technology ; Key Laboratory of Interface Science and Engineering in Advanced Materials , Ministry of Education , Taiyuan, Shanxi Province 030024 , China
College of Materials Science and Engineering , Taiyuan University of Technology ; Key Laboratory of Interface Science and Engineering in Advanced Materials , Ministry of Education , 79 West Yingze Street , Taiyuan, Shanxi Province 030024 , China
References (29)
Show source-provided references
1. Yang Z, Li JP, Zhang JX. Acta Metall. Sin. 2008, 21, 313–326.10.1016/S1006-7191(08)60054-X10.1016/S1006-7191(08)60054-X ↗
2. Bataev IA, Bataev AA, Mali VI. Mater. Des. 2012, 35, 225–227.10.1016/j.matdes.2011.09.03010.1016/j.matdes.2011.09.030 ↗
3. Zhang N, Wang W, Cao XQ. Mater. Des. 2015, 65, 1100–1101.10.1016/j.matdes.2014.08.02510.1093/biosci/biv113 ↗
4. Paramsothy M, Srikanth N, Gupta M. J. Alloys Compd. 2008, 461, 200–208.10.1016/j.jallcom.2007.07.05010.1016/j.jallcom.2007.07.050 ↗
5. Paramsothy M, Hassan SF, Srikanth N. Compos. Part A. Appl. Sci. Manuf. 2009, 40, 1490–1500.10.1016/j.compositesa.2009.06.00710.1016/j.compositesa.2009.06.007 ↗
6. Paramsothy M, Hassan SF, Srikanth N. J. Alloys Compd. 2009, 482, 73–80.10.1016/j.jallcom.2009.03.18110.1016/j.jallcom.2009.03.181 ↗
7. Chang H, Zheng MY, Gan WM. Scripta Mater. 2009, 61, 717–720.10.1016/j.scriptamat.2009.06.01410.1016/j.scriptamat.2009.06.014 ↗
8. Paramsothy M, Srikanth N. Mater. Sci. Eng. 2008, 494, 436–444.10.1016/j.msea.2008.04.04910.1016/j.msea.2008.04.049 ↗
9. Habbi MK, Paramsothy M. Compos. Sci. Technol. 2011, 71, 734–741.10.1016/j.compscitech.2011.01.02110.1016/j.compscitech.2011.01.021 ↗
10. Grignon F, Benson D, Vecchio KS, Meyers MA. Int. J. Imp. Eng. 2004, 30, 1333–1351.10.1016/j.ijimpeng.2003.09.04910.1016/j.ijimpeng.2003.09.049 ↗
11. Sato YS, Park SHC, Michiuchi M, Kokawa H. Scripta Mater. 2004, 50, 1233–1236.10.1016/j.scriptamat.2004.02.00210.1016/j.scriptamat.2004.02.002 ↗
12. Chen YC, Nakata K. Scripta Mater. 2008, 58, 433–436.10.1016/j.scriptamat.2007.10.03310.1016/j.scriptamat.2007.10.033 ↗
13. Somasekharan AC, Murr LE. Mater. Char. 2004, 52, 49–64.10.1016/j.matchar.2004.03.00510.1016/j.matchar.2004.03.005 ↗
14. Zhang L-J, Pei Q, Zhang J-X. Mater. Des. 2014, 64, 462.10.1016/j.matdes.2014.08.01310.1016/j.matdes.2014.08.013 ↗
15. Miao GH, Ma HH, Shen ZW, Yu Y. Mater. Des. 2014, 63, 538–543.10.1016/j.matdes.2014.06.05010.1016/j.matdes.2014.06.050 ↗
16. Wang YX, Beom HG, Sun M, et al. Int. J. Imp. Eng. 2011, 38, 51–60.10.1016/j.ijimpeng.2010.08.00310.1016/j.ijimpeng.2010.08.003 ↗
17. Tabbataee M, Mahmoudi J. Finite element simulation of explosive welding. http://www.scansims.org/sims2008/01.pdf.
18. Akbari Mousavi AA, Burley SJ, Al-Hassani STS. Int. J. Imp. Eng. 2005, 31, 719–734.10.1016/j.ijimpeng.2004.03.00310.1016/j.ijimpeng.2004.03.003 ↗
19. Akbari Mousavi AA, Al-Hassani STS. ASME 7th Biennial Conference on “Engineering Systems Design and Analysis,” Manchester, England, vol. 2, 2004, pp. 265–274.10.1115/ESDA2004-58602 ↗
20. Tanaka K. Mater. Sci. Forum. 2008, 556, 61–64.10.4028/0-87849-465-0.61 ↗
21. Hayhurst Colin J, Clegg Richard A. Int. J. Imp. Eng. 1997, 20, 337–48.10.1016/S0734-743X(97)87505-710.1016/S0734-743X(97)87505-7 ↗
22. Danyluk J. Spall Fracture of Multi-material Plates under Explosive Loading, master’s degree thesis, Rensselaer Polytechnic Institute at Hartford, Hartford, USA, 2011.
23. AUTODYN library. Century Dynamics Incorporated, USA, 2007.
24. Sui GF, Li JS, Sun F. Sci. China Phys. Mech. Astron. 2011, 54, 892–893.10.1007/s11433-011-4314-0 ↗
25. Wang X, Zheng Y, Liu H. Mater. Des. 2012, 35, 213–214.10.1353/gsr.2012.a465704 ↗
26. Akbari Mousavi AA, Al-Hassani STS. Mater. Des. 2008, 29, 1–19.10.1016/j.matdes.2006.12.01210.1016/j.matdes.2006.12.012 ↗
27. Akbari Mousavi AA, Al-Hassani STS. J. Mech. Phys. Solids. 2005, 53, 2501–2528.10.1016/j.jmps.2005.06.001
28. Findik F. Mater. Des. 2011, 32, 1081–1082.10.1016/j.matdes.2010.10.01710.1016/j.matdes.2010.10.017 ↗
29. Mousavi SAAA, Barrett LM, Al-Hassani STS. J. Mater. Process Technol. 2008, 202, 224–239.10.1016/j.jmatprotec.2007.09.02810.1016/j.jmatprotec.2007.09.028 ↗