Investigation on the anti-penetration performance of the steel/nylon sandwich plate
Source abstract
Abstract
Abstract In this paper, a new method is developed to investigate the anti-penetration performance of the steel/nylon sandwich plate, which incorporates experimental method with numerical simulation. Constitutive parameters of the steel/nylon sandwich plate are measured by the Hopkinson Pressure Bar, and LS-DYNA is applied to simulate the penetration process of projectiles into the sandwich plate. The dynamic response, failure modes and energy absorption coefficients are obtained, and the penetration tests are conducted to verify the numerical method. Results show: results obtained by experimental and numerical methods have very high agreement, which demonstrates that the method proposed can be applicable for predicting the anti-penetration performance of the sandwich plate.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Structural Response to Dynamic Loads · Transportation Safety and Impact Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Naval Architecture and Ocean Engineering , Jiangsu University of Science and Technology , Zhenjiang , China ,
Shanghai Research Institute of Materials , Shanghai , China ,
Shanghai lianyi bearing technology Co., Ltd , Shanghai , China ,
References (25)
Show source-provided references
1. Caprino G, Teti R. Impact and post-impact behavior of foam core sandwich structures[J]. Composite Structures, 1994, 29(1):47–55.10.1016/0263-8223(94)90035-3 ↗
2. Lu, G. and Yu, T.X. Energy Absorption of Structures and Materials. Cambridge: Woodhead Publishing Ltd[M]. 2003.10.1533/9781855738584 ↗
3. Jang B Z, Liau J Y, Hwang L R, et al. Structure-Property Relationships in Thermoplastic Particulate- and Ceramic Whisker-Modified Epoxy Resins[J]. Journal of Reinforced Plastics & Composites, 1989, 8(8):312–333.10.1177/073168448900800401 ↗
4. Goldsmith W, Wang G T, Li K, et al. Perforation of cellular sandwich plates[J]. International Journal of Impact Engineering, 1997, 19(5–6):361–379.10.1016/S0734-743X(97)00003-1 ↗
5. Niu W J, Yang F, Wang Z H, et al. Experimental research on penetration behavior of aluminum foam sandwich plate subjected to impact loading[J]. Binggong Xuebao/acta Armamentarii, 2011, 32:250–253.
6. Aydin M, Apalak M K, Gunes R, et al. An Experimental Study on Ballistics Performance: Functionally Graded Sandwich Plate Impacted by a 9 mm Parabellum Projectile[C]//International Symposium on Multiscale, Multifunctional and Functionally Graded Materials. 2014:18–18.10.5151/matsci-mmfgm-035-f ↗
7. ZHANG M, ZHAO H, CHEN H. Experimental Research on Anti-penetration Properties of Sandwich Plate with Aluminum Foam Core[J]. Chinese Quarterly of Mechanics, 2008, 29(2): 241–247.
8. Guo K, Zhu L, Li Y, et al. Experimental investigation on the dynamic behaviour of aluminum foam sandwich plate under repeated impacts[J]. Composite Structures, 2018, 200: 298–305.10.1016/j.compstruct.2018.05.148 ↗
9. Meo M, Vignjevic R, Marengo G. The response of honeycomb sandwich panels under low-velocity impact loading[J]. International Journal of Mechanical Sciences, 2005, 47(9):1301–1325.10.1016/j.ijmecsci.2005.05.006 ↗
10. Hang G Y, Yu W L, Wang T, et al. Research on the Anti-Penetration Performance of Aluminum Foam Sandwich Plate[J]. Applied Mechanics & Materials, 2014, 624(20):20–24.10.4028/www.scientific.net/AMM.624.20 ↗
11. Chang-Ye N I, Feng J, Tian-Jian L U. Numerical Simulation of the Ballistic Performance of Composite Pyramidal Lattice Truss Structure[J]. Acta Armamentarii, 2009, 30:94–97.
12. Yu J. Numerical simulation on anti-penetration performance of shelter plate made of steel fiber reinforced concrete with steel-concrete-steel sandwich structures[C]// International Conference on Mechanics and Mechatronics. 2015:1224–1230.10.1142/9789814699143_0150 ↗
13. Hang G Y, Yu W L, Wang T, et al. Research on the Anti-Penetration Performance of Aluminum Foam Sandwich Plate[J]. Applied Mechanics and Materials, 2014, 624: 20–24.10.4028/www.scientific.net/AMM.624.20 ↗
14. Yang F, Niu W, Jing L, et al. Experimental and numerical studies of the anti-penetration performance of sandwich panels with aluminum foam cores[J]. Acta Mechanica Solida Sinica, 2015, 28(6): 735–746.10.1016/S0894-9166(16)30013-1 ↗
15. Carrera E, Valvano S, Filippi M. Classical, higher-order, zig-zag and variable kinematic shell elements for the analysis of composite multilayered structures[J]. European Journal of Mechanics-A/Solids, 2018, 72: 97–110.10.1016/j.euromechsol.2018.04.015 ↗
16. Pagani A, Valvano S, Carrera E. Analysis of laminated composites and sandwich structures by variable-kinematic MITC9 plate elements[J]. Journal of Sandwich Structures & Materials, 2018, 20(1): 4–41.10.1177/1099636216650988 ↗
17. Kumar S K, Harursampath D, Carrera E, et al. Modal analysis of delaminated plates and shells using Carrera Unified Formulation–MITC9 shell element[J]. Mechanics of Advanced Materials and Structures, 2018, 25(8): 681–697.10.1080/15376494.2017.1302024 ↗
18. Bi G, Yin J, Wang Z. Anti-Penetration Performance Analysis of Hybrid Double Layer Honeycomb Sandwich Structure [J][J]. Journal of Ordnance Equipment Engineering, 2019, 40(06): 73–76.
19. Liu Q Q, Wang S P, Lin X, et al. Numerical simulation on the anti-penetration performance of polyurea-core Weldox 460 E steel sandwich plates[J]. Composite Structures, 2020, 236: 1–13.10.1016/j.compstruct.2019.111852 ↗
20. Zhao N, Ye R, Tian A, et al. Experimental and numerical investigation on the anti-penetration performance of metallic sandwich plates for marine applications[J]. Journal of Sandwich Structures & Materials, 2020, 22(2): 494–522.10.1177/1099636219855335 ↗
21. LS-DYNA970 KEYWORD USER’S MANUAL. Livermore Software Technology Corporation[M]. 2003, Version970, 1088–1093.
22. Johnson G R, Cook W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures[J]. Engineering Fracture Mechanics, 1985, 21(1):31–48.10.1016/0013-7944(85)90052-9 ↗
23. Zitao Guo. Research on characteristics of projectile water entry and ballistic resistance of targets under different mediums [D]. Harbin Institute of Technology, 2012.
24. Cowper G R, Symonds P S. Strain hardening and strain rate effect in the impact loading of cantilever beams[J]. Small Business Economics, 1957, 31(3):235–263.10.21236/AD0144762 ↗
25. Recht R F, Ipson T W. Ballistic Perforation Dynamics[J]. Journal of Applied Mechanics, 1963, 30(3):384.10.1115/1.3636566 ↗