Research on uniaxial compression performance and constitutive relationship of RBP-UHPC after high temperature
Source abstract
Abstract
Abstract This study examines the impact of the recycled brick powder (RBP) replacement rate, especially at elevated temperatures on RBP-ultra-high-performance concrete (UHPC) properties such as the stress–strain curve, Poisson’s ratio, elastic modulus, and axial compressive strength through uniaxial compression experiments. The results show that with the increase of heating temperature, the axial compressive strength of the specimen increases first and then decreases under natural cooling (NC). In contrast, Poisson’s ratio shows opposite values. The peak strain continues to increase, and the initial elastic modulus and peak secant modulus continue to decrease. Compared with NC, the axial compressive strength of the specimens under water cooling has been reduced, the peak strain is generally larger, the initial elastic modulus and the peak secant modulus are smaller, and the incorporation of RBP also has a certain effect on the mechanical properties. Through regression analysis, an equation is established to calculate the axial compressive strength of RBP-UHPC with temperature, accounting for variables such as temperature, RBP replacement rate, and cooling method. Furthermore, based on the results of axial compression experiments, a constitutive equation for axial compression in RBP-UHPC after exposure to high temperatures is proposed. Overall, the theoretical curve closely aligns with the experimental curve, verifying its accuracy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Civil Engineering, Zhengzhou University , Zhengzhou , 450001 , China
References (55)
Show source-provided references
1. De Larrard F, Sedran T. Optimization of ultra-high-performance concrete by the use of a packing model. Cem Concr Res. 1994;24(6):997–1009. 10.1016/0008-8846(94)90022-1.10.1016/0008-8846(94)90022-1 ↗
2. Rosseli SR, Sidek MNM, Saman HM, Arshad MF, Jaafar MFM, Ridzuan ARM, et al. Ultra High-performance concrete as alternative repair method: a review. J Fail Anal Prev. 2021;21:2072–80. 10.1007/s11668-021-01296-3.10.1007/s11668-021-01296-3 ↗
3. Akhnoukh AK, Buckhalter C. Ultra-high-performance concrete: Constituents, mechanical properties, applications and current challenges. Case Stud Constr Mater. 2021;15:e00559. 10.1016/j.cscm.2021.e00559.10.1016/j.cscm.2021.e00559 ↗
4. Abbas S, Nehdi M, Saleem M. Ultra-high performance concrete: Mechanical performance, durability, sustainability and implementation challenges. Int J Concr Struct Mater. 2016;10:271–95. 10.1007/s40069-016-0157-4.10.1007/s40069-016-0157-4 ↗
5. Gu C, Ye G, Sun W. Ultrahigh performance concrete-properties, applications and perspectives. Sci China Technol Sci. 2015;58:587–99. 10.1007/s11431-015-5769-4.10.1007/s11431-015-5769-4 ↗
6. Brühwiler E. UHPFRC technology to enhance the performance of existing concrete bridges. Struct Infrastruct Eng. 2020;16(1):94–105. 10.1080/15732479.2019.1605395.10.1080/15732479.2019.1605395 ↗
7. Bažant ZP, Zhou Y. Why did the world trade center collapse? —Simple analysis. Journal of Engineering Mechanics. 2002;128(1):2-6. 10.1061/(ASCE)0733-9399(2002)128:1(2).10.1061/(ASCE)0733-9399(2002)128:1(2) ↗
8. Luo D, Lu T, Chen YF. Application of ultra-high-performance concrete in prefabricated buildings. Mater Test. 2021;63(12):1174–83. 10.1515/mt-2021-0043.10.1515/mt-2021-0043 ↗
9. Abid M, Hou X, Zheng W, Hussain RR. High temperature and residual properties of reactive powder concrete–A review. Constr Build Mater. 2017;147:339–51. 10.1016/j.conbuildmat.2017.04.083.10.1016/j.conbuildmat.2017.04.083 ↗
10. Korpa A, Kowald T, Trettin R. Phase development in normal and ultra high performance cementitious systems by quantitative X-ray analysis and thermoanalytical methods. Cem Concr Res. 2009;39(2):69–76. 10.1016/j.cemconres.2008.11.003.10.1016/j.cemconres.2008.11.003 ↗
11. USGS (U.S. Geological Survey), 2021. Mineral Commodity 1086 Summaries 2021. USGS Available.
12. ECA (European Cement Association), 2020a. Global Cement 929 Production. ECA Available.
13. Rashad AM. An exploratory study on high-volume fly ash concrete incorporating silica fume subjected to thermal loads. J Clean Prod. 2015;87:735–44. 10.1016/j.jclepro.2014.09.018.10.1016/j.jclepro.2014.09.018 ↗
14. Bosoaga A, Masek O, Oakey JE. CO2 capture technologies for cement industry. Energy procedia. 2009;1(1):133–40. 10.1016/j.egypro.2009.01.020.10.1016/j.egypro.2009.01.020 ↗
15. He Z, Shen M, Shi J, Yalçınkaya Ç, Du S, Yuan Q. Recycling coral waste into eco-friendly UHPC: Mechanical strength, microstructure, and environmental benefits. Sci Total Environ. 2022;836:155424. 10.1016/j.scitotenv.2022.155424.10.1016/j.scitotenv.2022.155424 ↗
16. Ahmad S, Mohaisen KO, Adekunle SK, Al-Dulaijan SU, Maslehuddin M. Influence of admixing natural pozzolan as partial replacement of cement and microsilica in UHPC mixtures. Constr Build Mater. 2019;198:437–44. 10.1016/j.conbuildmat.2018.11.260.10.1016/j.conbuildmat.2018.11.260 ↗
17. Tang Q, Ma Z, Wu H, Wang W. The utilization of eco-friendly recycled powder from concrete and brick waste in new concrete: A critical review. Cem Concr Compos. 2020;114:103807. 10.1016/j.cemconcomp.2020.103807.10.1016/j.cemconcomp.2020.103807 ↗
18. Wild S, Gailius A, Hansen H, Pederson L, Szwabowski J. Pozzolanic properties of a variety of European clay bricks. Build Res & Inf. 1997;25(3):170–5. 10.1080/096132197370435.10.1080/096132197370435 ↗
19. Olofinnade OM, Ede AN, Ndambuki JM, Bamigboye G. Structural properties of concrete containing ground waste clay brick powder as partial substitute for cement. Materials Science Forum, Trans Tech Publ.; 2016. 10.4028/www.scientific.net/MSF.866.63.10.4028/www.scientific.net/MSF.866.63 ↗
20. Yuan C, Fu W, Raza A, Li H. Study on mechanical properties and mechanism of recycled brick powder UHPC. Buildings. 2022;12(10):1622. 10.3390/buildings12101622.10.3390/buildings12101622 ↗
21. Zhang Y, Raza A, Umar M, Chen Y, Yuan C. Study on frost resistance and interface bonding performance through the integration of recycled brick powder in ultra-high-performance concrete for structural reinforcement. Materials. 2023;16(21):6999. 10.3390/ma16216999.10.3390/ma16216999 ↗
22. Memon B, Oad M, Buller A, Raza A. Effect of curing methods on tensile strength of green concrete cylinders made with demolishing coarse aggregates. World J Eng Res Technol. 2020;6(2):66–75. 10.13140/RG.2.2.13008.87045.
23. Zhu Y, Hussein H, Kumar A, Chen G. A review: Material and structural properties of UHPC at elevated temperatures or fire conditions. Cem Concr Compos. 2021;123:104212. 10.1016/j.cemconcomp.2021.104212.10.1016/j.cemconcomp.2021.104212 ↗
24. Du Y, Qi H-H, Huang S-S, Liew JR. Experimental study on the spalling behaviour of ultra-high strength concrete in fire. Constr Build Mater. 2020;258:120334. 10.1016/j.conbuildmat.2020.120334.10.1016/j.conbuildmat.2020.120334 ↗
25. Banerji S, Kodur V, Solhmirzaei R. Experimental behavior of ultra high performance fiber reinforced concrete beams under fire conditions. Eng Struct. 2020;208:110316. 10.1016/j.engstruct.2020.110316.10.1016/j.engstruct.2020.110316 ↗
26. Ye H, Feng N, Ling-hu Y, Ran Z, Lin L, Qi S, et al. Research on fire resistance of ultra-high-performance concrete. Adv Mater Sci Eng. 2012;2012. 10.1155/2012/530948.10.1155/2012/530948 ↗
27. Schneider U, Diederichs U. Verhalten von ultrahochfesten Betonen (UHPC) unter Brandbeanspruchung. Beton‐und Stahlbetonbau. 2003;98(7):408–17. 10.1002/best.200301900.10.1002/best.200301900 ↗
28. Maier M, Zeiml M, Lackner R. On the effect of pore-space properties and water saturation on explosive spalling of fire-loaded concrete. Constr Build Mater. 2020;231:117150. 10.1016/j.conbuildmat.2019.117150.10.1016/j.conbuildmat.2019.117150 ↗
29. Li M, Qian C, Sun W. Mechanical properties of high-strength concrete after fire. Cem Concr Res. 2004;34(6):1001–5. 10.1016/j.cemconres.2003.11.007.10.1016/j.cemconres.2003.11.007 ↗
30. Savva A, Manita P, Sideris K. Influence of elevated temperatures on the mechanical properties of blended cement concretes prepared with limestone and siliceous aggregates. Cem Concr Compos. 2005;27(2):239–48. 10.1016/j.cemconcomp.2004.02.013.10.1016/j.cemconcomp.2004.02.013 ↗
31. Tang J, Ma W, Pang Y, Fan J, Liu D, Zhao L, et al. Uniaxial compression performance and stress–strain constitutive model of the aluminate cement-based UHPC after high temperature. Constr Build Mater. 2021;309:125173. 10.1016/j.conbuildmat.2021.125173.10.1016/j.conbuildmat.2021.125173 ↗
32. Wu Z, Shi C, He W, Wu L. Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete. Constr Build Mater. 2016;103:8–14. 10.1016/j.conbuildmat.2015.11.028.10.1016/j.conbuildmat.2015.11.028 ↗
33. Shah I, Li J, Khan N, et al. Bond-slip behavior of steel bar and recycled steel fibre-reinforced concrete. J Renew Mater. 2024;12(1). 10.32604/jrm.2023.031503.10.32604/jrm.2023.031503 ↗
34. Xiong MX, Liew JYR. Spalling behavior and residual resistance of fibre reinforced Ultra-High performance concrete after exposure to high temperatures. Mater Constr. 2015;65(320).10.3989/mc.2015.00715 ↗
35. Tayeh B, Hadzima-Nyarko M, Riad MYR, Hafez RDA. Behavior of ultra-high-performance concrete with hybrid synthetic fiber waste exposed to elevated temperatures. Buildings. 2023;13(1):129. 10.3390/buildings13010129.10.3390/buildings13010129 ↗
36. Sciarretta F, Fava S, Francini M, Ponticelli L, Caciolai M, Briseghella B, et al. Ultra-High performance concrete (UHPC) with polypropylene (Pp) and steel Fibres: Investigation on the high temperature behaviour. Constr Build Mater. 2021;304:124608. 10.1016/j.conbuildmat.2021.124608.10.1016/j.conbuildmat.2021.124608 ↗
37. Chen H-J, Yu Y-L, Tang C-W. Mechanical properties of ultra-high performance concrete before and after exposure to high temperatures. Materials. 2020;13(3):770. 10.3390/ma13030770.10.3390/ma13030770 ↗
38. Yu Z, Yang Q, Zhang J, Peng S. Research on uniaxial mechanical performance of high-performance concrete after high temperature rapid cooling and damage mechanism analysis. J Build Eng. 2024;108921. 10.1016/j.jobe.2024.108921.10.1016/j.jobe.2024.108921 ↗
39. Dimitri R, Rinaldi M, Tornabene F, Micelli F. Numerical study of the FRP-concrete bond behavior under thermal variations. Curved Layer Struct. 2023;10(1):20220193. 10.1515/cls-2022-0193.10.1515/cls-2022-0193 ↗
40. Yang J, Peng G-F, Zhao J, Shui G-S. On the explosive spalling behavior of ultra-high performance concrete with and without coarse aggregate exposed to high temperature. Constr Build Mater. 2019;226:932–44. 10.1016/j.conbuildmat.2019.07.299.10.1016/j.conbuildmat.2019.07.299 ↗
41. Raza A, Memon BA, Oad M. Effect of curing types on compressive strength of recycled aggregates concrete. QUEST Res J. 2019;17(2):7–12. 10.13140/RG.2.2.35161.95844.
42. Yuan C, Xu S, Raza A, Wang C, Wang D. Influence and mechanism of curing methods on mechanical properties of manufactured sand UHPC. Materials. 2022;15(18):6183. 10.3390/ma15186183.10.3390/ma15186183 ↗
43. Shi C, Mo Y-L. High-performance construction materials: science and applications. World scientific; 2008.10.1142/9789812797360 ↗
44. Yuan C, Wang D, Setiawan H, Wei Y. Effect and mechanism of different excitation modes on the activities of the recycled brick micropowder. Sci Eng Compos Mater. 2021;28(1):676–88. 10.1515/secm-2021-0062.10.1515/secm-2021-0062 ↗
45. China Engineering Construction Standardization Association. T/CECS 10107-2020 Technical Requirements for Ultra-High-Performance Concrete [ S]. Beijing: China Standards Press; 2020 (in Chinese).
46. Y Wei. Experimental study on mix proportion design and basic mechanical properties of recycled micro-powder UHPC [D]. [Master’s degree thesis]. Henan: Zhengzhou University; 2021 (in Chinese). 10.27466/d.cnki.gzzdu.2021.002998.
47. Zhenwei L. Research on mechanical properties and microstructure of limestone manufactured sand concrete after high temperature. [ Master ‘s thesis]. Guangxi: Guangxi University; 2021 (in Chinese). 10.27034/d.cnki.ggxiu.2021.000441.
48. Dougill J. Some effects of thermal volume changes on the properties and behaviour of concrete; 1968.
49. Huang L, Du Y, Zhu S, Wang L. Material property and constitutive model of C120 hybrid fiber ultra-high performance concrete at elevated temperatures. Structures. Elsevier; 2023. 10.1016/j.istruc.2023.02.057.10.1016/j.istruc.2023.02.057 ↗
50. Alsalman A, Dang CN, Prinz GS, Hale WM. Evaluation of modulus of elasticity of ultra-high performance concrete. Constr Build Mater. 2017;153:918–28. 10.1016/j.conbuildmat.2017.07.15810.1016/j.conbuildmat.2017.07.158 ↗
51. Haiyan L. Research on high temperature burst and mechanical properties of reactive powder concrete after high temperature [D]. [ Doctoral Dissertation]. Heilongjiang: Harbin Institute of Technology; 2012 (in Chinese).
52. Rusch H. Stress- strain relationships for concrete. J ACI. 1960;34(5):268–80.
53. Hognestad E, Hanson NW, McHenry D. Concrete stress distribution in ultimate strength design. Journal Proceedings; 1955. 10.14359/11609.
54. Zhenhai G. Strength and deformation of concrete – experimental basis and constitutive relationship. Beijing, China: Tsinghua University Press; 1997 (in Chinese).
55. Zhenhai G. Strength and constitutive relationship of concrete: principle and application. Beijing, China: China Building Industry Press; 2004.