Effects of Waste Eggshells addition on Microstructures, Mechanical and Tribological Properties of Green Metal Matrix Composite
Source abstract
Abstract
Abstract Chicken eggshell (Es) waste is an industrial byproduct, and its disposal constitutes a severe environmental risk. Eggshell is a new engineering reinforcement retaining excellent properties such as low density, renewable, eco-friendly, and high thermal stability. The current research aims to study the effects of eggshell particles addition on microstructures, mechanical and tribological properties of aluminium/eggshell green metal matrix composites (MMCs). In the present work Al–Es metal matrix composite is produced by powder metallurgy processes. SEM with EDX and XRD were used to examine the microstructures and the compounds that arise during the sintering process of the produced composites. Six tests were conducted on the produced samples including; dry wear test, micro Vickers hardness, and ultimate compressive strength. The results showed that the addition of 3 wt. % of eggshell improved wear resistance (65%), compressive strength (40%) and hardness (15%). At 6 and 9 wt. % of eggshell, negative results appeared.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Industrial Engineering Department, Faculty of Engineering, Jordan University of Science and Technology , P.O. Box 3030 , Irbid , 22110 , Jordan
References (59)
Show source-provided references
1. Hassan S, Aigbodion V. J. King Saud Univ. Eng. Sci. 2015, 27, 49-56.10.1016/j.jksus.2014.04.00310.1016/j.jksues.2013.03.001 ↗
2. Esmaily M, Mortazavi N, Svensson J, Halvarsson M, Wessén M, Johansson L, Jarfors A. Composites Part B. 2016, 94, 176-189.10.1016/j.compositesb.2016.02.01910.1016/j.compositesb.2016.02.019 ↗
3. Pirondi A, Collini L. Int. J. Fatigue. 2009, 31, 111-121.10.1016/j.ijfatigue.2008.05.00310.1016/j.ijfatigue.2008.05.003 ↗
4. Torralba J, da Costa C, Velasco F. J. Mater. Process. Technol. 2003, 133, 203-206.10.1016/S0924-0136(02)00234-010.1016/S0924-0136(02)00234-0 ↗
5. Anjali R.M, Bhandari S, Pant A, Saxena A, Seema N.K, Nikhil C, Dheeraj G, Sah P.L. International Journal of Mathematical, Engineering, Management Sciences. 2017, 2, 53-62.10.33889/IJMEMS.2017.2.1-005 ↗
6. Megahed M, Attia M, Abdelhameed M, El-Shafei A. Acta Metall. Sinica. 2017, 30, 781-790.10.1007/s40195-017-0568-510.1007/s40195-017-0568-5 ↗
7. Ibrahim I, Mohamed F, Lavernia E. J. Mater. Sci. 1991, 26, 1137-1156.10.1007/BF0054444810.1007/BF00544448 ↗
8. Shamim S, Singh H, Sasikumar C,Yadav D. Mater. Today:. Proc. 2017, 4, 2887-2898.10.1016/j.matpr.2017.02.169 ↗
9. Surappa M, Sadhana. 2003, 28, 319-334.10.1007/BF0271714110.1007/BF02717141 ↗
10. Gostariani R, Ebrahimi R, Asadabad M, Paydar M. Acta Metall. Sinica . 2017, 31, 245-253.10.1007/s40195-017-0640-1 ↗
11. Hayajneh M, Hassan A, Alrashdan A,Mayyas A. J. Alloys Compd. 2009, 470, 584-588.10.1016/j.jallcom.2008.03.03510.1016/j.jallcom.2008.03.035 ↗
12. Chaithanyasai A, Vakchore P, Umasankar V. Procedia Eng. 2014, 97, 961-967.10.1016/j.proeng.2014.12.37210.1016/j.proeng.2014.12.372 ↗
13. Kumar V, Gupta R, Batra N. Procedia Mater. Sci. 2014, 6, 1365-1375.10.1016/j.mspro.2014.07.11610.1016/j.mspro.2014.07.116 ↗
14. Almomani M, Hayajneh M, Draidi M. Part. Sci. Technol. 2015, 34, 317-323.10.1080/02726351.2015.1089349 ↗
15. Cevik E, Sun Y, Turen Y, Ahlatci H. Sci Eng Compos Mater. 2018, 25, 67-73.10.1515/secm-2015-030610.1515/secm-2015-0306 ↗
16. Hayajneh M, Hassan A, Al-Omari M. J.Mater. Eng. Perform. 2001, 10, 521-525.10.1361/10599490177034465610.1361/105994901770344656 ↗
17. Demir A, Altinkok N. Compos. Sci. Technol. 2004, 64, 2067-2074.10.1016/j.compscitech.2004.02.01510.1016/j.compscitech.2004.02.015 ↗
18. Rajan T, Pillai R, Pai B, Satyanarayana K, Rohatgi P. Compos. Sci. Technol. 2007, 67, 3369-3377.10.1016/j.compscitech.2007.03.02810.1016/j.compscitech.2007.03.028 ↗
19. Hassan A, Mayyas A, Alrashdan A, Hayajneh M. J. Mater. Sci. 2008, 43, 5368-5375.10.1007/s10853-008-2760-510.1007/s10853-008-2760-5 ↗
20. Almomani M, Tyfour W, Nemrat M. J. Alloys Compd. 2016, 679, 104-114.10.1016/j.jallcom.2016.04.00610.1016/j.jallcom.2016.04.006 ↗
21. Ogawa F, Yamamoto S, Masuda C. Acta Metallurgica Sinica (English Letters), 2018.
22. Mazahery A, Ostadshabani M. J. Compos. Mater. 2011, 45, 2579-2586.10.1177/002199831140111110.1177/0021998311401111 ↗
23. Al-Oqla, F., Salit, M., Materials Selection for Natural Fiber Composites (first ed.), 2017, Woodhead Publishing.10.1016/B978-0-08-100958-1.00002-5 ↗
24. Al-Oqla, F., Sapuan, S. M. J Polym Environ. 2017, 1-7.10.1201/9781351050944-1 ↗
25. Toro P, Quijada R, Yazdani-Pedram M, Arias J. Mater. Lett. 2007, 61, 4347-4350.10.1016/j.matlet.2007.01.10210.1016/j.matlet.2007.01.102 ↗
26. Bootklad M, Kaewtatip K. Carbohydr. Polym. 2013, 97, 315-320.10.1016/j.carbpol.2013.05.03010.1016/j.carbpol.2013.05.030 ↗
27. Hassan T, Rangari V, Jeelani S. ACS Sustainable Chem. Eng. 2014, 2, 706-717.10.1021/sc400405v10.1021/sc400405v ↗
28. Iyer K, Torkelson J. Compos. Sci. Technol. 2014, 102, 152-160.10.1016/j.compscitech.2014.07.02910.1016/j.compscitech.2014.07.029 ↗
29. Boronat T, Fombuena V, Garcia-Sanoguera D, Sanchez-Nacher L, Balart R. Mater. Des. 2015, 68, 177-185.10.1016/j.matdes.2014.12.02710.1016/j.matdes.2014.12.027 ↗
30. Mazahery A, Shabani M. Ceram. Int. 2012, 38, 4263-4269.10.1016/j.ceramint.2012.02.00810.1016/j.ceramint.2012.02.008 ↗
31. Moutsatsou A, Itskos G, Vounatsos P, Koukouzas N, Vasilatos C. Mater. Sci. Eng., A 2010, 527, 4788-4795.10.1016/j.msea.2010.04.00110.1016/j.msea.2010.04.001 ↗
32. El-Kady O, Fathy A. Mater. Des. 2014, 54, 348-353.10.1016/j.matdes.2013.08.04910.1016/j.matdes.2013.08.049 ↗
33. Liu J, Khan U, Coleman J. Fernandez B., Rodriguez P., Naher S., Brabazon D., Mater. Des. 2016, 94, 87-94.10.1016/j.matdes.2016.01.03110.1016/j.matdes.2016.01.031 ↗
34. Tan A, Teng J, Zeng X, Fu D, Zhang H. Powder Metall. 2017, 60, 66-72.10.1080/00325899.2016.127481610.1080/00325899.2016.1274816 ↗
35. Dwivedi S, Sharma S, Mishra R. International Journal of Precision Engineering and Manufacturing-Green Technology 2016, 3, 281-288.10.1007/s40684-016-0036-010.1007/s40684-016-0036-0 ↗
36. Sharma S, Dwivedi S. Hazard J. Mater. 2017, 333, 1-9.10.1016/j.jhazmat.2017.01.002
37. Razavi Hesabi Z, Hafizpour H, Simchi A.Mater. Sci. Eng., A 2007, 454, 89-98.10.1016/j.msea.2006.11.129 ↗
38. Xie G, Ohashi O, Sato T, Yamaguchi N, Song M, Mitsuishi K, Furuya K. Mater. Trans., JIM 2004, 45, 904-909.10.2320/matertrans.45.90410.2320/matertrans.45.904 ↗
39. MacAskill I, Hexemer R, Donaldson I, Bishop D. J. Mater. Process. Technol. 2010, 210, 2252-2260.10.1016/j.jmatprotec.2010.08.01810.1016/j.jmatprotec.2010.08.018 ↗
40. Jamal N, Yusof F, Nor Y, Othman M, Khalid K, Zakaria M. IOP Conference Series: Materials Science and Engineering 2018, 290, 012008.10.1088/1757-899X/290/1/01200810.1088/1757-899X/290/1/012008 ↗
41. Ghiță C, Popescu I. Comput. Mater. Sci. 2012, 64, 136-140.10.1016/j.commatsci.2012.05.03110.1016/j.commatsci.2012.05.031 ↗
42. Lin D, Yi S, Heo J, Lee J, German R, Park S. Ceram. Int. 2015, 41, 5057-5065.10.1016/j.ceramint.2014.12.07510.1016/j.ceramint.2014.12.075 ↗
43. Heckel R.W. Trans Metall Soc AIME 1961, 221, 671-675.
44. Vogiatzis C, Skolianos S. Composites Part A 2016, 82, 8-19.10.1016/j.compositesa.2015.11.03710.1016/j.compositesa.2015.11.037 ↗
45. Kok M. J. Mater. Process. Technol. 2005, 161, 381-387.10.1016/j.jmatprotec.2004.07.06810.1016/j.jmatprotec.2004.07.068 ↗
46. Sinha A, Farhat Z. Materials Sciences and Applications 2015, 6, 549-566.10.4236/msa.2015.6605910.4236/msa.2015.66059 ↗
47. ASTM G99, 1997, Standard test method for wear testing with a pin-on-disk apparatus, annual book of ASTM standards, 03.02.
48. Mahdavi S, Akhlaghi F. Tribol. Lett. 2011, 44, 1-12.10.1007/s11249-011-9818-2 ↗
49. Nemati N, Khosroshahi R, Emamy M, Zolriasatein A.Mater. Des. 2011, 32, 3718-3729.10.1016/j.matdes.2011.03.05610.1016/j.matdes.2011.03.056 ↗
50. Ahmadi A, Toroghinejad M, Najafizadeh A. Mater. Des. 2014, 53, 13-19.10.1016/j.matdes.2013.06.06410.1016/j.matdes.2013.06.064 ↗
51. Moazami-Goudarzi M, Akhlaghi F. Tribol. Int. 2016, 102, 28-37.10.1016/j.triboint.2016.05.01310.1016/j.triboint.2016.05.013 ↗
52. Ravindran P, Manisekar K, Rathika P, Narayanasamy P. Mater. Des. 2013, 45, 561-570.10.1016/j.matdes.2012.09.01510.1016/j.matdes.2012.09.015 ↗
53. Abdizadeh H, Ebrahimifard R, Baghchesara M. Composites Part B 2014, 56, 217-221.10.1016/j.compositesb.2013.08.02310.1016/j.compositesb.2013.08.023 ↗
54. Gopal P, Soorya Prakash K, Nagaraja S, Kishore Aravinth N. Tribol. Int. 2017, 116, 338-350.10.1016/j.triboint.2017.07.02510.1016/j.triboint.2017.07.025 ↗
55. Thandalam S, Ramanathan S, Sundarrajan S. J. Mater. Res. Technol. 2015, 4, 333-347.10.1016/j.jmrt.2015.03.00310.1016/j.jmrt.2015.03.003 ↗
56. Sahin S, Yüksel N, Hülya D, Ýrýzalp S. Materiali in Tehnologije 2013, 4, 639-646.
57. Wei T, Shamsuri S, Yee C., Rashid M, Ahsan Q. Procedia Eng. 2013, 68, 703-709.10.1016/j.proeng.2013.12.24210.1016/j.proeng.2013.12.242 ↗
58. Zhang K, Wang Z, Wang D, Guo Y, Zhao B. Tribol. Int. 2015, 90, 84-95.10.1016/j.triboint.2015.04.02810.1016/j.triboint.2015.04.028 ↗
59. Pech-Canul M, Katz R, Makhlouf M. Metall. Mater. Trans. A 2000, 31 (2), 565-573.10.1007/s11661-000-0291-z10.1007/s11661-000-0291-z ↗