Applicability of Magnetic Measurements to the Detection of Fracture Nucleation in 09G2S Steel
Source abstract
Abstract
Abstract The paper presents results of local magnetic measurements at various regions of two 09G2S steel specimens plastically deformed by uniaxial tension. The first specimen was deformed to crack formation, while the second was deformed to the initiation of necking (before the initiation of strain localization). Magnetic characteristics were determined in both the major magnetization reversal cycle and the minor magnetization reversal cycles in medium and weak fields. The fundamental possibility of applicability of locally measured magnetic properties of plastically deformed steel products in the minor magnetization reversal cycles in medium and weak fields to the detection of potential nuclei is experimentally demonstrated. It is shown that the presence of peaks, their magnitudes, and the magnetic field strengths at which they form on the field dependence of differential magnetic permeability can be used to obtain information about the strain corresponding to the test object region.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnetic Properties and Applications · Electromagnetic Effects on Materials · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Dias, M.B.S. and Landgraf, F.J.G., Compressive stress effects on magnetic properties of uncoated grain oriented electrical steel, J. Magn. Magn. Mater., 2020, vol. 504, p. 166566. https://doi.org/10.1016/j.jmmm.2020.16656610.1016/j.jmmm.2020.166566 ↗
2. Roskosz, M. and Fryczowski, K., Magnetic methods of characterization of active stresses in steel elements, J. Magn. Magn. Mater., 2020, vol. 499, p. 166272.10.1016/j.jmmm.2019.166272 ↗
3. Perevertov, O., Influence of the applied elastic tensile and compressive stress on the hysteresis curves of Fe-3%Si non-oriented steel, J. Magn. Magn. Mater., 2017, vol. 428, pp. 223–228. https://doi.org/10.1016/j.jmmm.2016.12.04010.1016/j.jmmm.2016.12.040 ↗
4. Leuning, N., Steentjes, S., Schulte, M., Bleck, W., and Hameyer, K., Effect of elastic and plastic tensile mechanical loading on the magnetic properties of NGO electrical steel, J. Magn. Magn. Mater., 2016, vol. 417, pp. 42–48. https://doi.org/10.1016/j.jmmm.2016.05.04910.1016/j.jmmm.2016.05.049 ↗
5. Aginei, R.V., Islamov, R.R., and Mamedova, E.A., Determination of the stress-strain state of a section of a pipeline under pressure based on the results of measuring the coercive force, Nauka Tekhnol. Truboprovodn. Transp. Nefti Nefteprod., 2019, vol. 9, no. 3, pp. 284–294.10.28999/2541-9595-2019-9-3-284-294 ↗
6. Berdnik, M.M. and Berdnik, A.G., Prospects for the application of coercivity metry for assessing the parameters of the stress-strain state of structures, Tekhnol. Mashinostr., 2019, no. 1, pp. 37–43.
7. Feng, S., Ai, Z., Liu, J., He, J., Li, Y., Peng, Q., and Li, C., Study on coercivity-stress relationship of X80 steel under biaxial stress, Adv. Mater. Sci. Eng., 2022, vol. 2022, p. 2510505. https://doi.org/10.1155/2022/251050510.1155/2022/2510505 ↗
8. Li, Y., Song, S., Dou, Y., and Chen, T., Influence of tensile stress on the magnetic properties of ultra-thin grain-oriented electrical steel, AIP Adv., 2023, vol. 13, p. 025223. https://doi.org/10.1063/9.000046810.1063/9.0000468 ↗
9. Kuleev, V.G., Tsar’kova, T.P., Sazhina, E.Y., et al., On the influence of plastic deformations of low-carbon ferromagnetic steels on the changes in the shapes of their hysteresis loops and the field dependences of the differential permeability, Russ. J. Nondestr. Test., 2015, vol. 51, pp. 738–749. https://doi.org/10.1134/S106183091512006210.1134/S1061830915120062 ↗
10. Kostin, V.N., Tsar’kova, T.P., Nichipuruk, A.P., et al., Irreversible changes in the magnetization as indicators of stressed-strained state of ferromagnetic objects, Russ. J. Nondestr. Test., 2009, vol. 45, pp. 786–796. https://doi.org/10.1134/S106183090911005910.1134/S1061830909110059 ↗
11. Kostin, V.N., Vasilenko, O.N., Filatenkov, D.Y., et al., Magnetic and magnetoacoustic testing parameters of the stressed–strained state of carbon steels that were subjected to a cold plastic deformation and annealing, Russ. J. Nondestr. Test., 2015, vol. 51, pp. 624–632. https://doi.org/10.1134/S106183091510007110.1134/S1061830915100071 ↗
12. Povolotskaya, A.M., Kostin, V.N., Mushnikov, A.N., and Perov, V.N., Comparison of the sensitivity of magnetic parameters to plastic tension for 20GN and 08Kh15N5D2T steels, Russ. J. Nondest. Test., 2025, vol. 61, pp. 1159–1166.10.1134/S1061830925700317 ↗
13. Gorkunov, E.S., Povolotskaya, A.M., Solov’ev, K.E., et al., Effect of plastic deformation and its localization zones on magnetic characteristics of steel 45, Russ. J. Nondestr. Test., 2009, vol. 45, pp. 521–525. https://doi.org/10.1134/S106183090908001410.1134/S1061830909080014 ↗
14. Zadvorkin, S.M. and Povolotskaya, A.M., Detecting plastic strain localization zones in steel products by the results of magnetic measurements, Procedia Struct. Integr., 2022, vol. 40, pp. 455–460. https://doi.org/10.1016/j.prostr.2022.04.06210.1016/j.prostr.2022.04.062 ↗
15. Khudorozhkova, Yu.V., Zadvorkin, S.M., Burov, S.V., and Kamantsev, I.S., Detection of prefracture zones in structural materials by magnetic and optical methods, Diagn. Resour. Mech. Mater. Struct., 2023, no. 1, pp. 24–40.10.17804/2410-9908.2023.1.024-040 ↗
16. Khudorozhkova, Yu.V. and Povolotskaya, A.M., On the possibility of detecting potential fracture nuclei in the 09G2S steel by magnetic measurements, Procedia Struct. Integr., 2024, vol. 65, pp. 121–126. https://doi.org/10.1016/j.prostr.2024.11.01910.1016/j.prostr.2024.11.019 ↗
17. Vicena, F., On the influence of dislocations on the coercive force of ferromagnetics, Czech. J. Phys., 1955, vol. 5, no. 4, pp. 480–501.10.1007/BF01687213 ↗
18. Bilger, H. and Träuble, H., Temperatur und Verformungsabhangikeit der Koerzitivfeldstarke von Eisen Einkristallen, Phys. Status Solidi, 1965, vol. 10, pp. 755–759.10.1002/pssb.2220100234 ↗
19. Träuble, H., Magnetisierungskurve und magnetische Hysterese ferromagnetischer Einkristall, Heidelberg: Springer, 1966.
20. Mikheev, M.N. and Gorkunov, E.S., Magnitnye metody strukturnogo analiza i nerazrushayushchego kontrolya (Magnetic Methods of Structural Analysis and Nondestructive Testing), Moscow: Nauka, 1993.
21. Smirnov, S.V. and Shveikin, V.P., Plastichnost’ i deformiruemost’ uglerodistykh stalei pri obrabotke davleniem (Plasticity and Deformability of Carbon Steels During Pressure Treatment), Yekaterinburg: Ural. Otd. Ross. Akad. Nauk, 2009.
22. Nichipuruk, A.P., Noskova, N.I., Gorkunov, E.S., Ponomareva, E.G., Volkova, B.I., and Temryukh, V.M., Structure and magnetic properties of steam pipes of 12Kh1MF after a long time operation under creep conditions, Defektoskopiya, 1995, no. 7, pp. 62–67.
23. Gorkunov, E.S., Magnetic structural-phase analysis as applied to diagnosing and evaluating the lifetime of products and structural components. Part I, Diagn. Resour. Mech. Mater. Struct., 2015, no. 1, pp. 6–40.10.17804/2410-9908.2015.1.006-040 ↗
24. Gorkunov, E.S., Povolotskaya, A.M., Zadvorkin, S.M., Putilova, E.A., and Mushnikov, A.N., The effect of cyclic preloading on the magnetic behavior of the hot-rolled 08G2B steel under elastic uniaxial tension, Res. Nondestr. Eval., 2021, vol. 32, no. 6, pp. 276–294.10.1080/09349847.2021.2002487 ↗
25. Putilova, E.A., Mushnikov, A.N., Povolotskaya, A.M., Goruleva, L.S., and Kryucheva, K.D., Features of changes in the structure and magnetic parameters of martensitic class steel under the action of plastic deformation, Metalloved. Term. Obrab. Met., 2024, vol. 66, no. 6 (828), pp. 66–73. https://doi.org/10.30906/mitom.2024.6.66-7310.30906/mitom.2024.6.66-73 ↗
26. Gorkunov, E.S. and Mushnikov, A.N., Magnetic methods for assessing elastic stresses in ferromagnetic steels (review), Kontrol’ Diagn., 2020, vol. 23, no. 12, pp. 4–23.
27. Ogneva, M.S., Nichipuruk, A.P., and Stashkov, A.N., Local determination of the field of induced magnetic anisotropy and the level of residual mechanical stresses in tensile-deformed bodies made of low-carbon steels, Russ. J. Nondestr. Test., 2016, vol. 52, pp. 617–622. https://doi.org/10.1134/S106183091611008510.1134/S1061830916110085 ↗
28. Pal’a, J., Stupakov, O., Bydzovsky, J., Tomas, I., and Novak, V., Magnetic behavior of low-carbon steel in parallel and perpendicular directions to tensile deformation, J. Magn. Magn. Mater., 2007, vol. 310, pp. 57–62.10.1016/j.jmmm.2006.07.029 ↗