journal article·2025-08

Rotating Eddy Current Array for Efficient Detection and Sizing of Defects in Multi-Layer Aerospace Structures

Merwane Khebal, Abdelhak Abdou, Tarik Bouchala, Bachir Abdelhadi

Publisher page

Abstract

Abstract This paper presents the design and modeling of a rotating eddy current array (ECA) system tailored for efficient detection and sizing of defects in complex and multilayer aerospace structures. The proposed system integrates a transmit/receive coil configuration with a rotating scanning mechanism, enhancing sensitivity, spatial resolution, and inspection coverage. Detailed descriptions of the sensor architecture, multiplexing strategy, and excitation parameters are provided, along with schematic illustrations of the system design. Simulation results demonstrate the system’s ability to detect defects regardless of rivet size or layer geometry, indicating uniform sensitivity and improved robustness. These findings confirm the system’s potential for reliable and rapid non-destructive evaluation of aerospace components, particularly in geometrically complex environments.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Non-Destructive Testing Techniques · Ultrasonics and Acoustic Wave Propagation · Electromagnetic Compatibility and Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Khebal, M., Abdou, A., Bouchala, T., Aboura, A., Belkhiri, K., and Guettafi, A., Static eddy current imaging for nondestructive testing of aeronautical structures, Stud. Eng. Exact Sci., 2024, vol. 5, no. 1, pp. 3484–3501. https://doi.org/10.54021/seesv5n1-17310.54021/seesv5n1-173 ↗
2. Abdou, A., Safer, O.A., Bouchala, T., Bendaikha, A., Abdelhadi, B., Guettafi, A., and Benoudjit, A., An eddy current nondestructive method for crack detection in multilayer riveted structures, Instrum. Mes. Métrol., 2019, vol. 18, no. 5, pp. 485–490. https://doi.org/10.18280/i2m.18050810.18280/i2m.180508 ↗
3. Janovec, M., Bugaj, M., and Smetana, M., Eddy current array inspection of riveted joints, Transp. Res. Procedia, 2019, vol. 43, pp. 48–56. https://doi.org/10.1016/j.trpro.2019.12.01810.1016/j.trpro.2019.12.018 ↗
4. Abdou, A., Bouchala, T., Abdelhadi, B., Guettafi, A., and Benoudjit, A., Nondestructive eddy current measurement of coating thickness of aeronautical construction materials, Instrum. Mes. Métrol., 2019, vol. 18, no. 5, pp. 451–457. https://doi.org/10.18280/i2m.18050410.18280/i2m.180504 ↗
5. Janovec, M., Cernan, J., and Skultéty, F., Use of non-destructive eddy current technique to detect simulated corrosion of aircraft structures, Koroze Ochr. Mater., 2020, vol. 64, no. 2, pp. 52–58. https://doi.org/10.2478/kom-2020-000810.2478/kom-2020-0008 ↗
6. El-Kahina, S. and Kamel, B., Stress influence to eddy current control of cracked aeronautical material, J. Meas. Eng., 2021, vol. 9, no. 4, pp. 231–240. https://doi.org/10.21595/jme.2021.2227910.21595/jme.2021.22279 ↗
7. Khebal, M., Abdou, A., Bouchala, T., Aboura, A., Bachir, A., and Amor, G., Nondestructive rapid defect testing around curved head rivets without displacement of eddy current sensors, Stud. Eng. Exact Sci., 2024, vol. 5, no. 1, pp. 2040–2062. https://doi.org/10.54021/seesv5n1-10110.54021/seesv5n1-101 ↗
8. Wang, R., Bao, B., Wang, W., Zhang, M., Liu, L., and Song, K., Research on remote-field eddy current focusing method for detecting hidden defects in aircraft riveted components, J. Nondestr. Eval., 2023, vol. 42, no. 4, p. 95. https://doi.org/10.1007/s10921-023-01011-210.1007/s10921-023-01011-2 ↗
9. Uchanin, V., Eddy current techniques for detecting hidden subsurface defects in multilayer aircraft structures, Trans. Aerosp. Res., 2022, no. 2, pp. 69–79. https://doi.org/10.2478/tar-2022-001110.2478/tar-2022-0011 ↗
10. Uchanin, V., Enhanced eddy current techniques for detection of surface-breaking cracks in aircraft structures, Trans. Aerosp. Res., 2021, no. 1, pp. 1–14. https://doi.org/10.2478/tar-2021-000110.2478/tar-2021-0001 ↗
11. Chady, T., Okarma, K., Mikolajczyk, R., Dziendzikowski, M., Synaszko, P., and Dragan, K., Extended damage detection and identification in aircraft structure based on multifrequency eddy current method and mutual image similarity assessment, Materials, 2021, vol. 14, no. 16, p. 4452. https://doi.org/10.3390/ma1416445210.3390/ma14164452 ↗
12. Bouattour, G., Trigona, C., Derbel, H.B.J., Baglio, S., La Rosa, R., and Kanoun, O., Non-destructive transmissive inductive thickness sensor for iot applications, in Proc. 2018 15th Int. Multi-Conf. Syst. Signals & Devices (SSD) (2018), pp. 1203–1207. https://doi.org/10.1109/SSD.2018.857070710.1109/SSD.2018.8570707 ↗
13. Marchand, B., Decitre, J., Sergeeva-Chollet, N., and Skarlatos, A., Development of flexible array eddy current probes for complex geometries and inspection of magnetic parts using magnetic sensors, AIP Conf. Proc., 2013, vol. 1511, pp. 488–493. https://doi.org/10.1063/1.477929010.1063/1.4779290 ↗
14. Xie, R., Chen, D., Pan, M., Tian, W., Wu, X., Zhou, W., and Tang, Y., Fatigue crack length sizing using a novel flexible eddy current sensor array, Sensors, 2015, vol. 15, no. 12, pp. 32138–32151. https://doi.org/10.3390/s15122991110.3390/s151229911 ↗
15. Wendler, F., Laue, R., Härtel, S., Awiszus, B., and Kanoun, O., Design of a multimodal sensor for the in-process measurement of material properties based on inductive spectroscopy, Measurement, 2024, vol. 227, p. 114187. https://doi.org/10.1016/j.measurement.2024.11418710.1016/j.measurement.2024.114187 ↗
16. Abdou, A., Bouchala, T., Abdelhadi, B., and Guettafi, A., 3d surface crack characterization by eddy current array image and a fast algorithm search, J. Electr. Eng., 2023, vol. 74, no. 2, pp. 127–131. https://doi.org/10.2478/jee-2023-001710.2478/jee-2023-0017 ↗
17. Rosell, A. and Persson, G., Finite element modelling of closed cracks in eddy current testing, Int. J. Fatigue, 2012, vol. 41, pp. 30–38. https://doi.org/10.1016/j.ijfatigue.2011.12.00310.1016/j.ijfatigue.2011.12.003 ↗
18. Bennoud, S. and Zergoug, M., Modeling and simulation for 3d eddy current testing in conducting materials, Int. J. Mech. Aerosp. Ind. Mechatron. Eng., 2014, vol. 8, no. 4, pp. 749–752. https://doi.org/10.5281/zenodo.109216510.5281/zenodo.1092165 ↗
19. Salama, B.M.O., El Islam, A.A.N., and Bouchala, T., A comparative study of optimization methods for eddy-current characterization of aeronautical metal sheets, Facta Univ. Ser. Electron. Energet., 2021, vol. 34, no. 4, pp. 547–555. https://doi.org/10.2298/FUEE2104547S10.2298/FUEE2104547S ↗
20. Abbassi, A., Bouchala, T., Abdou, A., and Abdelhadi, B., Eddy current characterization of 3d crack by analyzing probe signal and using a fast algorithm search, Russ. J. Nondestr. Test., 2020, vol. 56, no. 5, pp. 426–434. https://doi.org/10.1134/S106183092005002210.1134/S1061830920050022 ↗
21. Bhosale, P., Bapat, H., Mehekare, Y., Mandal, P., Veerapur, R., Jadhav, M., and Ramu, A., Detection of surface opening flaws using eddy current array technique, in Proc. 3rd Int. Conf. & Exhib. NDE 4.0 2025 (Bengaluru, India, 2025), Taj Yeshwantpur, vol. 30, pp. 3–6. https://doi.org/10.58286/3131110.58286/31311 ↗
22. Kasai, N., Le, M., Sekino, K., and Funada, Y., Crack detection using a cutting-edge flexible eddy current sensor with voltage and phase measurement techniques, Mech. Syst. Signal Process., 2024, vol. 219, p. 111613. https://doi.org/10.1016/j.ymssp.2024.11161310.1016/j.ymssp.2024.111613 ↗