Ultrasonic Evaluation of Residual Stresses in AISI 316Ti Steel Specimen after Laser Shock Peening
Source abstract
Abstract
Residual stresses induced by laser shock peening in the near-surface layer in AISI 316Ti austenitic stainless steel specimen were measured by ultrasonic technique using critically refracted longitudinal waves. The results of ultrasonic measurements were compared with the results obtained by hole drilling method. The values of the residual stresses induced by laser shock peening, the initial residual stresses in the rolled sheet, and the yield strength of the material were compared. The thermal stability of laser-induced residual stresses after annealing the specimen for 5 h at the temperature of $$200^\circ {\text{C}}$$ and reannealing for 5 h at the temperature of $$280^\circ {\text{C}}$$ was investigated. The results of study were analyzed taking into account the accepted assumptions, limitations, and uncertainties. The structure near the untreated and laser-treated surface was studied using optical and scanning electron microscopes. The directions of further studies for the development of nondestructive technique for ultrasonic evaluation of residual stresses induced by laser shock peening of the surface were proposed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · High-Velocity Impact and Material Behavior · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Tsuji, N., Tanaka, S., and Takasugi, T., Effects of combined plasma-carburizing and shot-peening on fatigue and wear properties of Ti-6Al-4V alloy, Surf. Coat. Technol., 2009, vol. 203, pp. 1400–1405. https://doi.org/10.1016/j.surfcoat.2008.11.01310.1016/j.surfcoat.2008.11.013 ↗
2. Mapelli, C., Manes, A., Giglio, M., Mombelli, D., Giudici, L., Baldizzone, C., and Gruttadauria, A., Survey about effects of shot peening conditions on fatigue performances of Ti-6Al-4V mechanical specimens featured by different cross-section geometries, Mater. Sci. Technol., 2012, vol. 28, no. 5, pp. 543–548. https://doi.org/10.1179/1743284711Y.000000009610.1179/1743284711Y.0000000096 ↗
3. Sandá, A., García Navas, V., and Gonzalo, O., Surface state of Inconel 718 ultrasonic shot peened: Effect of processing time, material and quantity of shot balls and distance from radiating surface to sample, Mater. Des., 2011, vol. 32, pp. 2213–2220. https://doi.org/10.1016/j.matdes.2010.11.02410.1016/j.matdes.2010.11.024 ↗
4. Kumar, S., Chattopadhyay, K., and Singh, V., Effect of ultrasonic shot peening on LCF behavior of the Ti–6Al–4V alloy, J. Alloys Compd., 2017, vol. 724, pp. 187–197. https://doi.org/10.1016/j.jallcom.2017.07.01410.1016/j.jallcom.2017.07.014 ↗
5. Prevey, P.S., Ravindranath, R.A., Shepard, M., and Gabb, T., Case studies of fatigue life improvement using low plasticity burnishing in gas turbine engine applications, J. Eng. Gas Turbines Power, 2003, 2006, vol. 128, no. 4, pp. 865–872. https://doi.org/10.1115/1.180741410.1115/1.1807414 ↗
6. Zhang, Q., Ye, Y., Yang, Y., Zhang, L., Huang, T., Dong, Y., Vasudevan, V.K., Ye, C., and Ding, H., Review of low-plasticity burnishing and its applications, Adv. Eng. Mater., 2022, vol. 24, no. 11, p. 2200365. https://doi.org/10.1002/adem.20220036510.1002/adem.202200365 ↗
7. Shiryaev, A.A. and Milenin, A.S., Effect of hardening methods on fatigue strength of compressor blades with stress concentrators, Izv. Vyssh. Uchebn. Zaved. Mashinostr., 2024, no. 9, pp. 72–81.
8. Montross, C.S., Wei, T., Lin, Y., Clark, G., and Mai, Y.W., Laser shock processing and its effects on microstructure and properties of metal alloys: a review, Int. J. Fatigue, 2002, vol. 24, pp. 1021–1036. https://doi.org/10.1016/S0142-1123(02)00022-110.1016/S0142-1123(02)00022-1 ↗
9. Ding, K. and Ye, L., Laser Shock Peening: Performance and Process Simulation, Cambridge: Woodhead, 2006.10.1201/9781439823620 ↗
10. Gachegova, E.A., Sikhamov, R., Ventzke, V., Kashaev, N., and Plekhov, O.A., Influence of laser shock peening on low- and high-cycle fatigue of an OT4-0 titanium alloy, J. Appl. Mech. Tech. Phy., 2022, vol. 63, pp. 335–342. https://doi.org/10.1134/S002189442202017110.1134/S0021894422020171 ↗
11. Zhelnin, M., Kostina, A., Iziumova, A., Vshivkov, A., Gachegova, E., Plekhov, O., and Swaroop, S., Fatigue life investigation of notched TC4 specimens subjected to different patterns of laser shock peening, Frattura ed Integrità Strutturale, 2023, vol. 65, pp. 100–111. https://doi.org/10.3221/IGF-ESIS.65.0810.3221/IGF-ESIS.65.08 ↗
12. Rossini, N.S., Dassisti, M., Benyounis, K.Y., and Olabi, A.G., Methods of measuring residual stresses in components, J. Mater. Des., 2012, vol. 35, pp. 572–588.10.1016/j.matdes.2011.08.022 ↗
13. Hughes, D.S. and Kelly, J.L., Second-order elastic deformation of solids, Phys. Rev., 1953, vol. 92, no. 5, pp. 1145–1149. https://doi.org/10.1103/PhysRev.92.114510.1103/PhysRev.92.1145 ↗
14. Nikitina, N.E., Akustouprugost’. Opyt prakticheskogo primeneniya (Acoustoelasticity—Experience of Practical Application), Nizhny Novgorod: TALAM, 2005.
15. Anisimov, V.A., Katorgin, B.I., Kutsienko, A.N., Malakhov, V.P., Rudakov, A.S., and Chvanov, V.K., Acoustic strain measurement, part of Nerazrushayuschii kontrol’. Spravochnik (Nondestructive Testing. Handbook), Klyuev, V.V., Ed., Moscow: Mashinostroenie, 2006, vol. 4.
16. Egle, D.M. and Bray, D.E., Measurement of acoustoelastic and third-order elastic constants for rail steel, J. Acoust. Soc. Am., 1976, vol. 60, no. 3, pp. 741–744. https://doi.org/10.1121/1.38114610.1121/1.381146 ↗
17. Song, W., Xu, C., Pan, Q., and Song, J., Nondestructive testing and characterization of residual stress field using an ultrasonic method, Chin. J. Mech. Eng., 2016, vol. 29, pp. 365–371. https://doi.org/10.3901/CJME.2015.1023.12610.3901/CJME.2015.1023.126 ↗
18. Kurashkin, K.V., Kirillov, A.G., and Gonchar, A.V., Use of longitudinal critically refracted waves to determine residual and temperature stresses in rails, Acoust. Phys., 2024, vol. 70, no. 1, pp. 51–57.10.1134/S1063771023600365 ↗
19. Razigraev, N.P., Physics, terminology and technology in ultrasonic testing with head waves, Defektoskopiya, 2020, no. 9, pp. 3–19. https://doi.org/10.31857/S013030822009001810.31857/S0130308220090018 ↗
20. Javadi, Y., Akhlaghi, M., and Najafabadi, M.A., Using finite element and ultrasonic method to evaluate welding longitudinal residual stress through the thickness in austenitic stainless steel plates, Mater. Des., 2013, vol. 45, pp. 628–642. https://doi.org/10.1016/j.matdes.2012.09.03810.1016/j.matdes.2012.09.038 ↗
21. Liu, Y., Liu, E., Chen, Y., Wang, X., Sun, C., and Tan, J., Study on propagation depth of ultrasonic longitudinal critically refracted (LCR) Wave, Sensors, 2020, vol. 20, p. 5724. https://doi.org/10.3390/s2019572410.3390/s20195724 ↗
22. Bychenok, V.A., Kinzhagulov, I.Yu., Berkutov, I.V., Marusin, M.P., Shcherba, I.E., Application of laser-ultrasonic generator for determining stress-strain state of special materials, Sci. Tech. J. Inf. Technol. Mech. Opt., 2013, no. 4 (86), pp. 107–114.
23. Karabutov, A.A., Podymova, N.B., and Cherepetskaya, E.B., Determination of uniaxial stresses in steel structures by the laser-ultrasonic method, J. Appl. Mech. Tech. Phy., 2017, vol. 58, no. 3, pp. 503–510. https://doi.org/10.1134/S002189441703015410.1134/S0021894417030154 ↗
24. Marusina, M.Y., Fedorov, A.V., Bychenok, V.A., and Berkutov, I.V., Ultrasonic laser diagnostics of residual stresses, Meas. Tech., 2015, vol. 57, pp. 1154–1159. https://doi.org/10.1007/s11018-015-0595-410.1007/s11018-015-0595-4 ↗
25. ASTM A240/A240M. Standard specification for chromium and chromium–nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications, 2022.
26. Gonchar, A., Solovyov, A., and Klyushnikov, V., Ultrasonic study of longitudinal critically refracted and bulk waves of the heat-affected zone of a low-carbon steel welded joint under fatigue, Acoustics, 2024, no. 6, pp. 593–609. https://doi.org/10.3390/acoustics603003210.3390/acoustics6030032 ↗
27. Liu, H., Li, Y., Li, T., Zhang, X., Liu, Y., Liu, K., and Wang, Y., Influence factors analysis and accuracy improvement for stress measurement using ultrasonic longitudinal critically refracted (LCR) wave, Appl. Acoust., 2018, vol. 141, pp. 178–187. https://doi.org/10.1016/j.apacoust.2018.07.01710.1016/j.apacoust.2018.07.017 ↗
28. Tanala, E., Bourse, G., Fremiot, M., and De Belleval, J.F., Determination of near surface residual stresses on welded joints using ultrasonic methods, NDT & E Int., 1995, vol. 28, no. 2, pp. 83–88. https://doi.org/10.1016/0963-8695(94)00013-A10.1016/0963-8695(94)00013-A ↗
29. Khlybov, A.A., Uglov, A.L., Rodyushkin, V.M., Katasonov, Y.A., and Katasonov, O.Y., The determination of mechanical stresses using Rayleigh surface waves excited by a magnetoacoustic transducer, Russ. J. Nondestr. Test., 2014, vol. 50, no. 12, pp. 701–707.10.1134/S1061830914120055 ↗
30. GOST (State Standard) R 71316–2024. Additive technologies. Products obtained by additive manufacturing methods. Determination of residual stresses by hole-drilling method, Moscow: Ross. Inst. Stand., 2024.
31. ASTM International, Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method, 2013.
32. Schajer, G.S., Measurement of non-uniform residual stresses using the hole-drilling method. Part I – Stress calculation procedures, J. Eng. Mater. Technol., 1988, vol. 110, pp. 338–343. https://doi.org/10.1115/1.322605910.1115/1.3226059 ↗
33. Corrêa, F.J., Alves, J.F., and Pereira, T.J., Residual stress profile determination by the hole-drilling method with calibration coefficients obtained using FEM, J. Theor. Appl. Mech., 2021, vol. 59, pp. 661–673. https://doi.org/10.15632/jtam-pl/14168610.15632/jtam-pl/141686 ↗
34. Gonchar, A.V., Klyushnikov, V.A., and Mishakin, V.V., Effect of plastic deformation and subsequent heat treatment on acoustic and electromagnetic properties of 12Kh18N10T steel, Zavod. Lab. Diagn. Mater., 2019, vol. 85, no. 2, pp. 23–28.10.26896/1028-6861-2019-85-2-23-28 ↗
35. Mishakin, V.V., Gonchar, A.V., Klyushnikov, V.A., Kurashkin, K.V., Fomin, A.E., and Sergeeva, O.A., Condition monitoring of cyclically deformed stainless steels by acoustic and eddy current methods, Izmer. Tekh., 2021, no. 2, pp. 62–67.10.32446/0368-1025it.2021-2-62-67 ↗
36. Pereira, P. and Santos, A.A., Influence of anisotropy generated by rolling on the stress measurement by ultrasound in 7050 T7451 aluminum, Exp. Mech., 2013, vol. 53, pp. 415–425. https://doi.org/10.1007/s11340-012-9647-810.1007/s11340-012-9647-8 ↗
37. Uglov, A.L. and Khlybov, A.A., On the inspection of the stressed state of anisotropic steel pipelines using the acoustoelasticity method, Russ. J. Nondestr. Test., 2015, vol. 51, no. 4, pp. 210–216.10.1134/S1061830915040087 ↗
38. Zhao, W., Zhou, B., Bai, W., and Wang, Z., Research on ultrasonic synchronous detection method for material residual stress and thickness, Russ. J. Nondestr. Test., 2024, no. 11, pp. 30–45.10.31857/S0130308224110037 ↗
39. Marusina, M.Y., Fedorov, A.V., Bychenok, V.A., and Berkutov, I.V., Evaluation of the influence of external factors in ultrasonic testing of stress-strain states, Izmer. Tekh., 2017, vol. 59, pp. 1165–1169. https://doi.org/10.1007/s11018-017-1109-310.1007/s11018-017-1109-3 ↗
40. Mironov, S., Ozerov, M., Kalinenko, A., Stepanov, N., Salishchev, G., Zherebtsov, S., Plekhov, O., Sikhamov, R., Ventzke, V., Kashaev, N., and Semiatin, L., On the relationship between microstructure and residual stress in laser-shock-peened Ti-6Al-4V, J. Alloys Compd., 2022, vol. 900, p. 163383.10.1016/j.jallcom.2021.163383 ↗