Characterization of Temperature-Dependent Behavior in Hot Rolled EN8 Steel
Source abstract
Abstract
A comprehensive experimental study was conducted on EN8 steel samples subjected to hot rolling at various temperatures and with different numbers of passes. The research investigates the influence of these rolling parameters on the material’s microstructure, hardness, and magnetic properties. The study includes controlled heating to specific temperatures, precise adjustments of roll spacing, and meticulous monitoring of rolling parameters. Key findings include the microstructural evolution during hot rolling, with grain refinement and phase transition, notably influenced by temperature. The data also reveals the relationship between rolling conditions, material hardness, and percentage of recrystallization, offering insights into optimizing material properties. Furthermore, the study presents an in-depth analysis of the Barkhausen peak’s behavior concerning temperature, showcasing its potential for non-destructive hardness evaluation. Overall, this research provides valuable knowledge for material engineers and manufacturers aiming to tailor EN8 steel properties through optimized rolling and heat treatment processes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Nwachukwu, P.U. and Oluwole, O.O., Effects of rolling process parameters on the mechanical properties of hot-rolled St60Mn steel, Case Stud. Constr. Mater., 2017, vol. 6, pp. 134–146. https://doi.org/10.1016/j.cscm.2017.01.00610.1016/j.cscm.2017.01.006 ↗
2. Jiao, H., Xu, Y., Xu, H., Zhang, Y., and Jiang, J., Influence of hot deformation on texture and magnetic properties of strip cast non-oriented electrical steel, J. Magn. Magn. Mater., 2018, vol. 462, pp. 205–215. https://doi.org/10.1016/j.jmmm.2018.05.01510.1016/j.jmmm.2018.05.015 ↗
3. Raabe, D., Overview on basic types of hot rolling textures of steels, Mater. Technol. Steel Res. Int., 2003, vol. 74, no. 5, pp. 327–337. https://doi.org/10.1002/srin.20030019410.1002/srin.200300194 ↗
4. Chaudhari, A. and Sharma, A., Effect of ultrasonic vibration assisted dry grinding on hysteresis loop characteristics of AISI D2 tool steel, Sadhana, vol. 46, p. 245. https://doi.org/10.1007/s12046-021-01771-510.1007/s12046-021-01771-5 ↗
5. Srivastava, A., Kumar, H., Yusufzai, M.Z.K., and Vashista, M., Barkhausen noise signal analysis of heat treated samples at various magnetising frequencies, Int. J. Mater. Prod. Technol., 2018, vol. 57, p. 287. https://doi.org/10.1504/IJMPT.2018.1001557110.1504/IJMPT.2018.10015571 ↗
6. Nahak, B., Srivastava, A., Yusufzai, M.Z.K., and Vashista, M., Surface integrity assessment upon electric discharge machining of die steel using non-destructive magnetic Barkhausen noise technique, Trans. Indian Inst. Met., 2020, vol. 73, pp. 967–974. https://doi.org/10.1007/s12666-020-01914-y10.1007/s12666-020-01914-y ↗
7. Stupakov, A., Dynamic normalization of the Barkhausen noise signal, J. Magn. Magn. Mater., 2019, vol. 482, pp. 135–147. https://doi.org/10.1016/j.jmmm.2019.03.03610.1016/j.jmmm.2019.03.036 ↗
8. Jiao, H., Xu, Y., Xiong, W., Zhang, Y., and Misra, R.D.K., High-permeability and thin-gauge non-oriented electrical steel through twin-roll strip casting, Mater. Des., 2017, vol. 136, pp. 23–33. https://doi.org/10.1016/j.matdes.2017.09.05110.1016/j.matdes.2017.09.051 ↗
9. Ravindran, M., Aswatha, M., Santhosh, N., Ravichandran, G., and Madhusudhan, M., Effect of heat treatment on fatigue characteristics of En8 steel, IOP Conf. Ser. Mater. Sci. Eng., 2021, vol. 1013. https://doi.org/10.1088/1757-899X/1013/1/01200910.1088/1757-899X/1013/1/012009 ↗
10. Ilangkumaran, M., Tiruvenkadam, N., Saranya, M., and Thulsidharan, R., Selection of wear resistive nano coating in En8 steel, Bull. Sci. Res., 2019, pp. 73–80. https://doi.org/10.34256/bsr192910.34256/bsr1929 ↗
11. Pitoňák, M., Neslusan, M., Minarik, P., Capek, J., and Kalina, T., Investigation of magnetic anisotropy and barkhausen noise asymmetry resulting from uniaxial plastic deformation of steel S235, Appl. Sci. (Switz.), 2021, vol. 11, p. 8. https://doi.org/10.3390/app1108360010.3390/app11083600 ↗
12. Zgútová, K. and Pitoňák, M., Attenuation of Barkhausen noise emission due to variable coating thickness, Coatings, 2021, vol. 11, no. 3, pp. 1–13. https://doi.org/10.3390/coatings1103026310.3390/coatings11030263 ↗
13. Bahleda, F., Neslušan, M., Pastorek, F., Koňár, R., and Kubjatko, T., Barkhausen noise emission as a function of tensile stress in low-alloyed steels: Influence of corrosion and steel strength, Appl. Sci., 2023, vol. 13, p. 116574. https://doi.org/10.3390/app1311657410.3390/app13116574 ↗
14. International organization for standardization, metallic materials: Vickers hardness test, Int. Organ. Stand., 2000.
15. Dafé, S.S.F.D., Paolinelli, S.D.C., and Cota, A.B., Influence of thermomechanical processing on shear bands formation and magnetic properties of a 3% Si non-oriented electrical steel, J. Magn. Magn. Mater., 2011, vol. 323, no. 24, pp. 3234–3238. https://doi.org/10.1016/j.jmmm.2011.07.01510.1016/j.jmmm.2011.07.015 ↗