Experimental Study of Concrete by Using Ultrasonic Surface Waves at Hundreds of Kilohertz Frequency Range
Source abstract
Abstract
Abstract In this paper, a characterization study of concrete samples with ultrasonic surface waves at hundreds of kilohertz frequency range is presented. These waves are generated and received by using 0.5 MHz-nominal frequency transducers. This investigation therefore concerns the first centimeters in the nearby of the material surface. The study was applied to concrete specimens for which a compositional parameter which is the water-to-cement ratio (W/C) has been varied. The latter affects the density and porosity of the material and therefore its mechanical properties. In addition, the evolution of acoustic and mechanical parameters of the concrete during its curing period has been investigated. The acoustic velocity and attenuation parameters are determined by exploiting the time of flight and the amplitude of the received ultrasonic signals. This study shows that the variation of the water-to-cement ratio affects the velocity of propagation of the surface waves and also leads to a variation of the mechanical strength of the concrete. It concludes that there is a strong correlation between the strength of the concrete, the ultrasonic velocity, and the W/C ratio. The results obtained by the destructive evaluation, which provides a measurement of the compressive strength by mechanical crushing test, confirm those obtained by the non-destructive evaluation of concrete. The study shows that this type of non-destructive testing using ultrasonic surface waves is beneficial particularly when the concrete structure is only accessible from the surface or when the propagation of the bulk waves is perturbed by the presence of reinforcements.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Geophysical Methods and Applications · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Chekroun, M., Le Mararrec, L., Abraham, O., Durand, O., and Villain, G., Analysis of coherent surface wave dispersion and attenuation for non-destructive testing of concrete, Ultrasonics, 2009, vol. 49, pp. 743–751. https://doi.org/10.1016/j.ultras.2009.05.00610.1016/j.ultras.2009.05.006 ↗
2. Lafhaj, Z., Goueygou, M., Djerbi, A., and Kaczmarek, M., Correlation between porosity, permeability and ultrasonic parameters of mortar with variable water/ cement ratio and water content, Cem. Concr. Res., 2006, vol. 36, pp. 625–633. https://doi.org/10.1016/j.cemconres.2005.11.00910.1016/j.cemconres.2005.11.009 ↗
3. Chekroun, M., Caractérisation mécanique des premiers centimètres du béton avec des ondes de surface, PhD Thesis, 2008, Nantes: Central School of Nantes.
4. Gholizad, S., A review of non-destructive testing methods of composite materials, Procedia Struct. Integr., 2016, vol. 1, pp. 50–57. https://doi.org/10.1016/j.prostr.2016.02.00810.1016/j.prostr.2016.02.008 ↗
5. Shi, X., Park, P., Rew, Y., Huang, K., and Sim, C., Constitutive behaviors of steel fiber reinforced concrete under uniaxial compression and tension, Constr. Build. Mater., 2020, vol. 233, p. 117316. https://doi.org/10.1016/j.conbuildmat.2019.11731610.1016/j.conbuildmat.2019.117316 ↗
6. Ding, W., Cheng, Y., Yufu, L., and Liangie, L., An ultrasonic approach for characterizing subsurface fractures in concrete, Nondestr. Test. Eval., 2023. https://doi.org/10.1080/10589759.2023.228706710.1080/10589759.2023.2287067 ↗
7. Dethof, F., Rabe, U., and Kessler, S., Numerical investigation of near and far field ultrasound transducer radiation characteristics in concrete, Int. Symp. Nondestr. Test. Civ. Eng., Zurich, 2022.
8. Kang, S., Ham, S., and Kim, K.-J., An analytical, numerical, and experimental study of Rayleigh wave scattering for internal vertical crack evaluation, Constr. Build. Mater., 2021, vol. 306, p. 124838. https://doi.org/10.1016/j.conbuildmat.2021.12483810.1016/j.conbuildmat.2021.124838 ↗
9. Haifan, Y., Linjun, L., and Pizhong, Q., Localization and size quantification of surface crack of concrete based on Rayleigh wave attenuation model, Constr. Build. Mater., 2021, vol. 280, p. 122437. https://doi.org/10.1016/j.conbuildmat.2021.12243710.1016/j.conbuildmat.2021.122437 ↗
10. Chenzhi, C., Xuhui, H., Yunfeng, Z., Kehui, Y., and Dizi, W., The surface wave attenuation zone of periodic composite in-filled trenches and its isolation performance in train-induced ground vibration isolation, Comput. Geotech., 2021, vol. 139, p. 104421. https://doi.org/10.1016/j.compgeo.2021.10442110.1016/j.compgeo.2021.104421 ↗
11. Raach, Y., Derouiche,Y., and Messelmi, F., Influence of concrete age on the behavior of ultrasonic waves in interfaces (concrete—steel–concrete), J. Mech. Eng. Sci., 2020, vol. 234, pp. 4239–4257. https://doi.org/10.1177/095440622092119610.1177/0954406220921196 ↗
12. Chaix, J., Ack-Baraly, C., Garnier, V., and Salin, J., Etude de la propagation des ondes de volume et de surface dans du béton, Cofrend 2011 (Dunkerque, 2011). https://www.ndt.net/?id=12092.
13. Hassaim, M., Ghazi, J., Ballivy, G., and Khayat, K., Evaluation de l’état du béton par la technique d’analyse spectrale des ondes de Rayleigh, Can. J. Civ. Eng., 2001, vol. 28, pp. 1018–1028. https://doi.org/10.1139/l01-06210.1139/l01-062 ↗
14. Goueygou, M., Piwakowski, B., Fnine, A., Buyle-Bodine, F., Safinowski, P., and Kosecki, A., Contrôle non destructive des structures en béton par ondes de surface ultrasonores, Congrès Français d’Acoustique, 2006, pp. 729–732.
15. Ould Naffa, S., Goueygou, V., Piwakowski, B., and Buyle-Bodin, F., Detection of chemical damage in concrete using ultrasound, Ultrasonics, 2002, vol. 40, pp. 247–251. https://doi.org/10.1016/S0041-624X(02)00146-410.1016/S0041-624X(02)00146-4 ↗
16. Anh Vu, Q., Garnier, V., Chaix, J.F., Payan, C., Lott, M., and Eiras, J.N., Concrete cover characterisation using dynamic acousto-elastic testing and Rayleigh waves, Constr. Build. Mater., 2016, vol. 114, pp. 87–97. https://doi.org/10.1016/j.conbuildmat.2016.03.11610.1016/j.conbuildmat.2016.03.116 ↗
17. Ospitia, N. et al., Sensor size effect on Rayleigh wave velocity on cementitious surfaces, Sensors, 2021, vol. 21(19), p. 6483. https://doi.org/10.3390/s2119648310.3390/s21196483 ↗
18. Slimani, H., Cheniti, N., Abdelli, K., and Boutkedjirt, T., Characterization of concrete by using bulk longitudinal ultrasonic waves at low frequencies - correlation with compressive strength testing, Defect. Diffus. Forum, 2021, vol. 406, pp. 430–440. https://doi.org/10.4028/www.scientific.net/DDF.406.43010.4028/www.scientific.net/DDF.406.430 ↗
19. EN 12504-4, Testing concrete in structures—Part 4: Determination of ultrasonic pulse velocity, 2021.
20. Silk, M.G., The determination of crack penetration using ultrasonic surface waves, NDT Int., 1976, vol. 9, pp. 290–297. https://doi.org/10.1016/0308-9126(76)90071-710.1016/0308-9126(76)90071-7 ↗
21. Dieulesaint, E. and Royer, D., Elastic Waves in Solids: Free Propagation and Guided, Paris: Ed. Masson, 1996.
22. Viktorov, I.A., Rayleigh and Lambs Waves, Physical Theory and Application, New York: Plenum, 1967.
23. Piwakowski, B., Fnine, A., Goueygou, M., and Buyle-Bodin, F., Generation of Rayleigh waves into mortar and concrete samples, Ultrasonics, 2004, vol. 42, pp. 395–402. https://doi.org/10.1016/j.ultras.2004.01.09910.1016/j.ultras.2004.01.099 ↗
24. Chaix, J., Rossat, M., Garnier, V., and Corneloup, M., An experimental evaluation of two effective medium theories for ultrasonic wave propagation in concrete, Acoust. Soc. Am., 2012, vol. 131, pp. 4481–4490.10.1121/1.4712022 ↗
25. Waterman, P-C. and Truell. R., Multiple scattering of waves, J. Math. Phys., 1961, vol. 2, pp. 512–537. https://doi.org/10.1063/1.170373710.1063/1.1703737 ↗
26. Foldy, L., The multiple scattering of waves. I. General theory of isotropic scattering by randomly distributed scatterers, Phys. Rev., 1945, vol. 67, pp. 107–119. https://doi.org/10.1103/PhysRev.67.10710.1103/PhysRev.67.107 ↗
27. Yu, T., Chaix, J-F., Audibert, L., Komatitsch, D., Garnier, V., and Hénault, J-M., Simulations of ultrasonic wave propagation in concrete based on a two-dimensional numerical model validated analytically and experimentally, Ultrasonics, 2018, vol. 92, pp. 21–34. https://doi.org/10.1016/j.ultras.2018.07.01810.1016/j.ultras.2018.07.018 ↗
28. Peters, F. and Petit, L., A broad band spectroscopy method for ultrasound wave velocity and attenuation measurement in dispersive media, Ultrasonics, 2003, vol. 41, pp. 357–363. https://doi.org/10.1016/S0041-624X(03)00109-410.1016/S0041-624X(03)00109-4 ↗
29. Yu, T., Modélisation de la propagation des ondes ultrasonores dans le béton pour l’amélioration du diagnostic des structures de génie civil, PhD Thesis, Marseille: Aix-Marseille Univ., 2018.
30. Ridengaoqier, E., Shigemitsu, H., Phommahaxay, P., and Satoshi. K., Experimental study on the porosity evaluation of pervious concrete by using ultrasonic wave testing on surfaces, Constr. Build. Mater., 2021, vol. 300, pp. 2–11. https://doi.org/10.1016/j.conbuildmat.2021.12395910.1016/j.conbuildmat.2021.123959 ↗
31. Locher, F.W., Richartz, W., and Sprung, S., Setting of ciment, Part I: Reaction and development of structure, Cem.-Kalk-Gyps., 1976, vol. 29, pp. 435–442.
32. Biryukov, S.V., Gulyaev, Y.V., Krylov, V.V., and Plessky, V.P., Surface Acoustic Waves in Inhomogeneous Media, Berlin: Springer, 1995.10.1007/978-3-642-57767-3 ↗