Use of notched samples in technological testing of materials by method of hot torsion
Source abstract
Abstract
Features of experimental determination of plasticity and stiffness parameters of deformed metallic materials by the method of mechanical shear test using cylindrical samples with small V-shaped notches are considered.
The source flagged this abstract for review. Check formulas and completeness against the original publication.
Source: openaire · Quality: needs review · Source record ↗
Source flags: short_text
Source flags: short_text
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Dzugutov, M.Ya.,Plasticheskaya deformatsiya vysokolegirovannykh stalei i splavov (Plastic Deformation of Highly Doped Steels and Alloys), Moscow: Metallurgiya, 1977.
2. Bulat, S.I., Tikhonov, A.S., and Dubrovin, A.K.,Deformiruemost’ strukturno-neodnorodnykh stalei i splavov (Forgeability of Structurally Inhomogeneous Steels and Alloys), Moscow: Metallurgiya, 1975.
3. Polukhin, P.I., Gun, G.Ya., and Galkin, A.M.,Soprotivlenie plasticheskoi deformatsii metallov i splavov (Resistance to Plastic Stress in Metals and Alloys), Moscow: Metallurgiya, 1976.
4. Vydrin, V.N., Tishchenko, O.I., Batin, Yu.T.,et al., Prokatka vysokolegirovannykh stalei i splavov (Rolling Highly Doped Metals and Alloys), Chelyabinsk: Yuzhno-Ural'skoe Knizhnoe Izd, 1966.
5. Gulyaev, A.P. and Sarmanova, L.M., High-Temperature Plasticity of High-Carbon Steels,MiTOM, 1972, no. 4, pp. 43–47.
6. Gulyaev, Yu.A.,Sverkhplastichnost’ stali (Superplasticity of Steel), Moscow: Metallurgiya, 1982.
7. Geller, Yu.A.,Instrumental’nye stali (Tool Steels), Moscow: Metallurgiya, 1975.
8. Vorontsov, V.K., Petrov, V.A., Kotelkin, A.V.,et al., Estimates of Steel Plasticity in High-Temperature Torsion Tests,Nauchnye trudy, Moscow, MISiS, 1976, pp. 116–119.
9. Il'yushin, A.A.,Plastichnost’. Osnovy matematicheskoi teorii (Plasticity. Principles of Mathematical Theory) Moscow: Akad. Nauk SSSR, 1963.
10. Kolmogorov, V.L.,Mekhanika obrabotki metallov davleniem (Mechanics of Pressure Treatment of Metals), Moscow: Metallurgiya, 1986.
11. Krinitsin, V.A., Apparatus and Technique for Testing of Metals under High-Temperature Alternating Strain, inObrabotka metallov davleniem (Pressure Treatment of Metals), Sverdlovsk: Kirov Ural Polytech. Inst., 1982, pp. 87–94.
12. Migachev, B.A., Identification of High-Temperature Plasticity of Austenite-Ferrite Steel with Its Phase State and Chemical Composition,Defektoskopiya, 1997, no. 10, pp. 87–94.
13. Zhuravlev, F.M., Markov, P.A., and Migachev, B.A., Apparatus for Torsion Tests under Cyclic Load, inObrabotka metallov davleniem (Pressure Treatment of Metals), Sverdlovsk: Ural Polytech. Inst., 1982, pp. 81–86.
14. Adler, Yu.P., Markova, E.V., and Granovskii, Yu.V.,Planirovanie éksperimenta pri poiske optimal’nykh uslovii (Planning of Experiment for Searching Optimal Conditions), Moscow: Nauka, 1976.
15. Mitropol’skii, A.K.,Tekhnika statisticheskikh vychislenii (Techniques of Statistical Calculations), Moscow: Fizmatgiz, 1961.
16. Migachev, B.A. and Zhuravlev, F.M., Refining Basic Relations in Models of Limiting Strains for Pressure Treatment of Metals,Metally, 1995, no. 6, pp. 34–40.