Accounting for the statistical weights of factors used when studying the liability of rolled products to brittle fracture
Source abstract
Abstract
The interrelationships between structure, magnetic properties, and impact strength at different temperatures were studied in a 09Γ2 steel with an unchanged chemical composition after varying the heating conditions prior to rolling, as well as the final rolling temperature. These interrelations were also studied for a number of low-alloy steels of different grades (close to steel 09Γ2), which were produced in the workflow at the Nizhni Tagil Iron and Steel Works. It was shown that the coercive force and relaxation magnetization can be used to separate the effects of ferrite grain size and shape on steel properties. The constraint equations for the impact strength and magnetic properties were obtained in terms of a multiparametric model with allowance for the impact strength test temperatures. Idealized relationships between the impact strength and magnetic properties of Ст 3сп and 09Γ2 steels were obtained for the impact strength-coercive force coordinate plane with allowance for the impact strength test temperatures and statistical weight of the studied properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Properties and Failure Mechanisms · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Mikheev, M.N. and Yakutovich, M.V., Magnetic Method for Testing Microstructure of Steel and Mechanical Properties of Sheet Steel, Stal’, 1945, no. 3, pp. 91–93.
2. Kokhman, L.V. and Mikheev, M.N., Electromagnetic Inspection of Mechanical Properties of Carbon Steel Pipes, Defektoskopiya, 1969, no. 5, pp. 91–96.
3. Grigoryan, G.V. and Mul’ko, G.N., Determination of Mechanical Properties of Plate Steel 17, Defektoskopiya, 1976, no. 1, pp. 77–80.
4. Zaugol’nikov, D.A., Aisin, R.G., and Pratusevich, A.E., Application Experience of Magnetomechanical Inspection of Properties of Hot-Rolled Sheet Steel, Stal’, 1974, no. 2, pp. 168–170.
5. Aronson, E.V., Bida, G.V., Kamardin, et al., Magnetic Inspection of Mechanical Properties of Plate Rolled Products Made of Steels 20ê and 09Γ2, Defektoskopiya, 1977, no. 2, pp. 121–124.
6. Aronson, E.V., Bida, G.V., Kamardin, V.M., and Mikheev, M.N., Magnetic Inspection of Mechanical Properties of Heavy Section Rolled Products, Defektoskopiya, 1977, no. 2, pp. 125–127.
7. Timoshenko, N.N., Aisin, R.G., Bondarenko, V.A., et al., Magnetic Inspection of Properties of Reinforcing Steel, Stal’, 1977, no. 7, pp. 661–663.
8. Kovrigin, A.A., Yushin, P.V., Kachurin, D.S., et al., Magnetic Nondestructive Testing of Mechanical Properties of Products Made of Steel 3, Byull. TsIIN ChM, 1971, no. 16, pp. 52–53.
9. Zaugol’nikov, D.A., Aisin, R.G., and Pratusevich, A.E., Application Experience of Magnetomechanical Inspection of Properties of Hot-Rolled Sheet Steel, Stal’, 1974, no. 2, pp. 168–170.
10. Timoshenko, N.N., Development and Adoption of Nondestructive Quality Control Methods, Stal’, 1974, no. 6, pp. 542–544.
11. Timoshenko, N.N., Bochkov, G.N., Alymov, A.A., et al., Nondestructive Magnetic Inspection of Mechanical Properties of Hot-Rolled Strip, Zavod. Lab., 1976, no. 8, pp. 979–980.
12. Kovrigin, A.A., Dement’eva, N.G., and Cherdantseva, L.G., Magnetic Method for Nondestructive Testing of Mechanical Properties of Sheet Steel 16ΓС, Zavod. Lab., 1978, no. 8, pp. 991–992.
13. Chesnov, N.A., Pyatunin, G.A., Slavov, V.I., and Lukina, A.A., Nondestructive Testing and Statistical Control of Mechanical Properties of Rolled Graded Products, Stal’, 1980, no. 8, pp. 728–729.
14. Mel’gui, M.A., Vostrikov, A.A., and Zborovskii, A.A., Magnetic Inspection of Mechanical Properties of Rolled Sheet Steel Products, Defektoskopiya, 1971, no. 3, pp. 10–15.
15. Burganova, V.A., Khalileev, P.A., Kokhman, L.V., et al., Possibility of Electromagnetic Inspection of Microstructure and Mechanical Properties of Cold-Deformed Pipes Made of Steel 12X1MΦ, Defektoskopiya, 1971, no. 5, pp. 51–56.
16. Burganova, V.A. Kokhman, L.V., et al., Electromagnetic Inspection of Microstructure and Mechanical Properties of Cold-Deformed Pipes Made of Steel, Defektoskopiya, 1974, no. 4, pp. 73–79.
17. Tsar’kova, T.P., Pochuev, N.D., and Bida, G.V., Magnetic Inspection of Mechanical Properties of Boiler Pipes, in Sovremennye metody nerazrushayushchego kontrolya i voprosy ego metrologicheskogo obespecheniya (Modern Methods for Nondestructive Testing and Problems of Its Metrological Assurance), Sverdlovsk: IFM UNTs AN SSSR, 1980, pp. 15–16.
18. Mel’gui, M.A., Piunov, V.D., Pyatunin, G.A., and Chesnov, N.A., Testing of Mechanical Properties of Cold-Rolled Sheet Low-Carbon Steel Using Local Magnetic-Field Gradient, in Nerazrushaushchie metody i sredstva kontrolya i ikh primenenie v promyshlennosti (Nondestructive Testing Methods and Facilities and Their Application in Industry), Minsk: Nauka i tekhnica, 1973, pp. 98–103.
19. Mel’gui, M.A., Piunov, V.D., Zborovskii, A.A., et al., Correlation Method for Testing Mechanical Properties of Sheet Rolled Products, in Nerazrushaushchie metody i sredstva kontrolya i ikh primenenie v promyshlennosti (Nondestructive Testing Methods and Facilities and Their Application in Industry), Minsk: Nauka i tekhnica, 1973, pp. 104–110.
20. Mel’gui, M.A., Shidlovskaya, E.A., Vostrikov, A.A., et al., Nondestructive Testing of Mechanical Properties of Deep-Pressing Steels, Stal’, 1977, no. 2, pp. 167–170.
21. Mel’gui, M.A., Timoshenko, N.N., Aisin, R.G., and Bondarenko, V.A., Nondestructive Magnetic Inspection of Low-Carbon Cold-Rolled Strips and Ribbons, Zavod. Lab., 1977, no. 5, pp. 581–583.
22. Mel’gui, M.A., Matyuk, V.F., Krutikova, L.A., et al., Inspection of Hot-Rolled Products Made of Steels 3сп and 10сп by ИMA-5A Instruments, Zavod. Lab., 1988, no. 4, pp. 65–68.
23. Mikheev, M.N., Magnetic Method for Testing the Hardness and Microstructure of Steel Pipes, Zavod. Lab., 1938, no. 10, p. 1155.
24. Bida, G.V., Gorkunov, E.S., and Shevnin, V.M., Magnitnyi kontrol’ mekhanicheskikh svoistv prokata (Magnetic Inspection of Mechanical Properties of Rolled Products), Yekaterinburg: Ural. Otd. Ross. Akad. Nauk, 2002.
25. Brikman, M.C., Vinogradova, L.N., Kleinberg, A.Ya., and Fastritskii, V.S., Stochastic Methods in Nondestructive Testing, Defektoskopiya, 1983, no. 11, pp. 80–87.
26. Rudyuk, S.I., Baguzin, V.I., Belkin, E.L., et al., Statistical Study of the Effect of Chemical Composition on Properties of Heavy Section Rolled Products, et al., Stal’, 1973, no. 9, pp. 833–834.
27. Bida, G.V. and Nichipuruk, A.P., Multiparameter Methods in Magnetic Structuroscopy and Nondestructive Testing of Mechanical Properties of Steels, Defektoskopiya, 2007, no. 8, pp. 3–24 [Rus. J. Nondestr. Test. (Engl. Transl.), 2007, vol. 43, no. 8, pp. 493–509].10.1134/S1061830907080013 ↗
28. Aronson, E.V., Bida, G.V., Kamardin, V.M., et al., Effect of Final Rolling Temperature and Degree of Reduction on the Mechanical Properties and Coercive Force of Steel 3сп, Defektoskopiya, 1977, no. 4, pp. 99–104.
29. Aronson, E.V., Bida, G.V., Kamardin, V.M., et al., Possibility of Nondestructive Testing of Impact Strength of Rolled Products Made of Low-Carbon Low-Alloyed Steels, Defektoskopiya, 1978, no. 6, pp. 66–72.
30. Aronson, E.V., Bida, G.V., Kamardin, V.M., et al., Study of the Possibility of Nondestructive Testing of Impact Strength of Rolled Products Made of Low-Carbon Low-Alloyed Steels, Defektoskopiya, 1980, no. 5, pp. 48–59.
31. Mikheev, M.N., Kamardin, V.M., Bida, G.V., et al., Magnetochemical Method for Estimating the Liability of Rolled Products Made of Low-Carbon Low-Alloyed Steels to Brittle Fracture, Defektoskopiya, 1982, no. 5, pp. 74–77.
32. Mikheev, M.N., Kamardin, V.M., Bida, G.V., and Aronson, E.V., Combination of Methods of Nondestructive Testing and Statistical Prognostication of Mechanical Properties of Rolled Steels, Defektoskopiya, 1985, no. 5, pp. 45–48.
33. Kamardin, V.M. and Bida, G.V., Vliyanie tekhnologii prokatki na kharakter svyazi mekhanicheslikh svoistv stalei 09Γ2, 20K, Сm3сn s koertsitivnoi siloi (Effect of the Rolling Technology on the Character of the Relation of Mechanical Properties of Steels 09Γ2, 20K, Ст3сп and the Coercive Force), Available from VINITI, 1987, Moscow, no. 235-V88.
34. Kamardin, V.M., Bida, G.V., and Samokhvalova, L.Z., Character of Correlation between the Impact Strength and Coercive Force of Low-Carbon and Low-Alloyed Steels, Defektoskopiya, 1989, no. 1, pp. 23–27.
35. Kamardin, V.M. and Bida, G.V., Vliyanie tekhnologii prokatki na kharakter svyazi mekhanicheslikh svoistv stalei 09Γ2, 20K, Сm3сn s koertsitivnoi siloi (Effect of the Rolling Technology on the Character of Relation of Mechanical Properties of Steels 09Γ2, 20K, Ст3сп and the Coercive Force), Available from VINITI, 1988, Moscow, no. 235-V88.
36. Bida, G.V. and Kamardin, V.M., Use of Magnetic Properties Related to Reversible Magnetization Reversal Processes for Nondestructive Testing of Ductile Properties of Rolled Products, Defektoskopiya, 1990, no. 11, pp. 50–56.
37. Bida, G.V. and Kamardin, V.M., Nondestructive Testing of Ductile Properties of Rolled Products, Defektoskopiya, 1991, no. 7, pp. 10–21.
38. Bida, G.V. and Kamardin, V.M., Physical Substantiation for Testing of Impact Strength of Rolled Products Made of Low-Carbon and Low-Alloyed Steels, Defektoskopiya, 1995, no. 10, pp. 3–31.
39. Bida, G.V., Nondestructive Testing of Mechanical Properties of Rolled Steel (Review): 1. Tests of Strength and Plastic Properties. 2. Testing of Ductile Properties, Defektoskopiya, 2005, no. 5, pp. 54–89 [Rus. J. Nondestr. Test. (Engl. Transl.), 2005, vol. 41, no. 5, pp. 296–323].10.1007/s11181-005-0169-7 ↗
40. Kamardin, V.M. and Samokhvalova, L.Z., Experience of Nondestructive Testing of the Impact Strength of Rolled Products Made of Low-Carbon and Low-Alloy Steels at the Nizhni Tagil Iron and Steel Works, Defektoskopiya, 2006, no. 8, pp. 20–23 [Rus. J. Nondestr. Test. (Engl. Transl.), 2006, vol. 42, no. 8, pp. 505–507].10.1134/S106183090608002X ↗
41. Bida, G.V., Application of Corrected Least-Squares Procedure and Accounting for Structure Parameters in Calculating the Correlation between Impact Strength of Low-Alloyed Steels and Coercive Force, Defektoskopiya, 2011, no. 2, pp. 12–21 [Rus. J. Nondestr. Test. (Engl. Transl.), 2011, vol. 47, no. 2, pp. 82–89].10.1134/S1061830911020045 ↗
42. Bida, G.V. and Nichipuruk, A.P., Increasing the Reliability of the Multiparametric Method for Nondestructive Testing of Mechanical Properties of Articles, Defektoskopiya, 2008, no. 12, pp. 64–71 [Rus. J. Nondestr. Test. (Engl. Transl.), 2008, vol. 44, no. 12, pp. 854–858].10.1134/S1061830908120085 ↗