Features of Thermal Nondestructive Testing of Impact Damage to Products Made of Polymer Composite Materials
Source abstract
Abstract
Abstract—The widespread introduction of polymer composite materials (PCMs) into aviation technology has led to the search and selection of effective methods for nondestructive testing of aircraft structure elements. According to the operating data, one of the main types of accidental damage to aviation equipment is shock effects. Therefore, the problems of detecting such damage to PCM products using thermal nondestructive testing as a promising method and identifying the features of this approach are relevant. In this work, the authors carried out tests on standard samples of materials, structurally similar samples, and the elements of a full-scale aircraft construction. The results of thermal imaging surveys of impact damage to PCM products were analyzed with standard and dedicated software after testing. Suggestions recommended for further research and practical use are formulated.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermography and Photoacoustic Techniques · Advanced Measurement and Detection Methods · Calibration and Measurement Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Feigenbaum, Yu.M. and Dubinskii, S.V., Influence of accidental operational damage on the strength and life of the aircraft structure, Nauchn. Vestn. MGTU GA, 2013, no. 187, pp. 83–91.
2. Breuer, U.P., Requirements, development, and certification process, in Commercial Aircraft Composite Technology, Switzerland: Springer Int. Publ., 2016, ch. 2, pp. 25–42.10.1007/978-3-319-31918-6 ↗
3. Maldague, X.P.V., Jones, T.S., Kaplan, H., Marinetti, S., and Prystay, M., Fundamentals of infrared and thermal testing, Part 1. Principles of infrared and thermal testing, in Nondestructive Handbook, Infrared and Thermal Testing, Maldague, X. and Moore, P.O., Tech. Eds., Columbus, Ohio: ASNT Press, 2001, vol. 3, ch. 2, 3rd ed.
4. Vavilov, V.P., Infrakrasnaya termographiya i teplovoi kontrol’ (Infrared Thermography and Thermal Testing), Moscow: Spektr, 2009.
5. Upside down: robot for inspection and repairs [electronic resource]. https://www.lufthansa-technik.com/ en/caire-repair-robot. Accessed 18 July, 2020.
6. Vavilov, V.P., Chulkov, A.O., and Derusova, D.A., Evaluating severity of impact damage in CFRP by determining thermal effusivity and diffusivity, WSEAS Trans.Heat Mass Transfer, 2014, vol. 9, no. 1, pp. 251–260.
7. Vavilov, V., Chulkov, A., Smotrov, A., Smotrova, S., and Moskovchenko, A., Characterizing impact damage in GFRP/CFRP composites by determining thermal effusivity/diffusivity, Meas. Sci. Technol., 2019, vol. 30, no. 3, p. 034003. https://doi.org/10.1088/1361-6501/ab018e10.1088/1361-6501/ab018e ↗
8. Kul’kov, A.A., Budadin, O.N., and Kozelskaya, S.O., A thermal method and tools for diagnosing the reliability of structures made of composite materials in the process of force loading based on the analysis of dynamic temperature fields, in Tr. 2-i Mezhdunar. konf. “Deformirovanie i razrushenie kompozitsionnykh materialov i konstruktsii” (Proc. 2nd Int. Conf. “Deformation and Failure of Composite Materials and Structures” (DFCMS-2016)) (Moscow, October 18–20, 2016), Moscow: Stolitsa, IMASH RAN, 2016, pp. 69–70.
9. Syas’ko, V.A., Possibilities of using active thermography methods for operational nondestructive testing of high-tech composite and metal products in the process of their manufacture and operation, in Sb. tr. 2-i Mezhdunar. nauchn.-tekh. konf. “Pribory i metody nerazrushayushchego kontrolya kachestva izdelii i konstruktsii iz kompozitsionnykh i neodnorodnykh materialov” (NKKM-2016) (Proc. 2nd Int. Sci.-Tech. Conf. “Instruments and methods of nondestructive quality control of products and structures made of composite and heterogeneous materials” (NKKM- 2016)) (St. Petersburg, December 7–9, 2016), St. Petersburg: SVEN, 2016, pp. 132–142.
10. Kovalev, A.V., Matveev, V.I., Koshkin, V.V., and Khizhnyak, S.A., Thermal testing of aircraft structures, MEGA-TECH. New Technol. Ind. Diagn. Saf., 2011, nos. 2–3, pp. 16–22.
11. Meola, C., Boccardi, S., Boffa, N.D., Ricci, F., and Carlomagno, G.M., Infrared thermography to evaluate impact damaging of composites, in ECCM16—16th Eur. Confer. Composite Mater. (Seville, Spain, June 22–26, 2014).
12. Meola, C., Carlomagno, G.M., Ricci, F., Lopresto, V., and Caprino, G., Investigation of impact damage in composites with infrared thermography, in 6th NDT Progr., Mazal, P., Ed. (Prague, October 10–12, 2011), 2011, pp. 175–182.
13. Halliwell, S., NCN Best Practice Guide—Repair of Fibre Reinforced Polymer (FRP) Structures, NetComposites, 2007.
14. Swiderski, W., Szabra, D., and Szudrowicz, M., Nondestructive testing of composite armours by using IR thermographic method, in Proc. 9th Int. Conf. Quant. InfraRed Thermography—QIRT 2008 (Krakow, Poland, July 2–5, 2008).10.21611/qirt.2008.12_12_16 ↗
15. Péronnet, E., Pastor, M.-L., Huillery, R., Dalverny, O., Mistou, S., and Welemane, H., Nondestructive investigation of defects in composite structures by three infrared thermographic techniques, in Proc. Int. Conf. Exp. Mech. ICEM 15 (Porto, Portugal, July 22–27, 2012).
16. Ptaszek, G.S., Investigation and development of transient thermography for detection of disbonds in thermal barrier coating systems, Doctoral (Eng.) Thesis, London: Imp. Coll., 2012.10.1063/1.4716267 ↗
17. ALTAIR Software, Version 5, FLIR SYSTEMS, 2008.
18. Software “Nondestructive testing of aviation and space materials using active quantitative infrared thermography (AQIRT),” Tomsk Polytech. Univ., 2018.
19. GOST R 53698-2009. Nondestructive testing. Thermal methods. Terms and Definitions.
20. GOST R ISO 18434-1-2013. Condition monitoring and diagnostics of machines. Thermography. Part 1. General methods (similar to ISO 18434-1: 2008. Condition monitoring and diagnostics of machines—Thermography—Part 1: General procedures).
21. Kaz’min, E.A. and Vavilov, V.P., Comparison of methods for processing thermal images in thermal nondestructive testing of PCM samples, in Mater. III Otrasl. konf. po izmeritel’noi tekhnike i metrologii dlya issledovanii letatel’nykh apparatov. KIMILA-2018 (Proc. III Ind. Conf. Meas. Eng. Metrol. Aircraft Res. KIMILA-2018), 2048, no. 3, pp. 387–396.
22. Nondestructive Testing System. Types (Methods) and Technology of Nondestructive Testing. Terms and Definitions. Reference Manual, ser. 28, no. 4, Moscow: NTTs Bezop. Prom-sti Gosgortekhnadzor Ross., 2003.