Using Methods of Analysis of Optical Images of Friction Surfaces of Ti–Al–N Based Coatings for Assessing Accumulation of Damage and Diagnostics of Failure in Tribological Tests
Source abstract
Abstract
The processes of damage accumulation and failure in thin ceramic coatings based on the Ti–Al–N system deposited on ductile steel and brittle sitall substrates have been investigated during tribological tests under dry friction conditions. Fractal analysis was carried out to quantitatively assess damage to friction surfaces, as well as Fourier and wavelet analysis of their images obtained using optical microscopy. It is shown that the spectral analysis (Fourier and wavelet analysis) make it possible to reveal an unambiguous correlation between the quantitative parameters obtained and the rate of wear of coatings at the stage of steady wear. At the same time, the fractal dimension provided an estimate of the dynamics of accumulation of damage at the run-in stage but did not allow one to be produced at the stage of steady-state wear.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Force Microscopy Techniques and Applications · Advanced machining processes and optimization · Surface Roughness and Optical Measurements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Perea, D. and Bejarano, G., Development and characterization of TiAlN (Ag, Cu) nanocomposite coatings deposited by DC magnetron sputtering for tribological applications, Surf. Coat. Technol., 2020, vol. 381, p. 125095.10.1016/j.surfcoat.2019.125095 ↗
2. Builo, S.I., Vereskun, V.D., Kolesnikov, V.I., et al. Determining friction coefficient at run-in stage and diagnosing the point of transition to steady-state phase based on acoustic emission signals, Russ. J. Nondestr. Test., 2020, vol. 56, no. 1, pp. 41–48.10.1134/S1061830920010039 ↗
3. Łępicka, M., Grądzka-Dahlke, M., Pieniak, D., Pasierbiewicz, K., Kryńska, K., and Niewczas, A., Tribological performance of titanium nitride coatings: A comparative study on TiN-coated stainless steel and titanium alloy, Wear, 2019, vol. 422, pp. 68–80.10.1016/j.wear.2019.01.029 ↗
4. Qi, S., Li, X., and Dong, H., Reduced friction and wear of electro-brush plated nickel composite coatings reinforced by graphene oxide, Wear, 2019, vol. 426, pp. 228–238.10.1016/j.wear.2018.12.069 ↗
5. Li, Z., Wei, M., Kui Xiao, K., Bai, Z., Xue, W., Dong, C., Wei, D., and Li, X., Microhardness and wear resistance of Al2O3–TiB2–TiC ceramic coatings on carbon steel fabricated by laser cladding, Ceram. Int., 2019, vol. 45, no. 1, pp. 115–121.10.1016/j.ceramint.2018.09.140 ↗
6. Goldstein, R.V. and Osipenko, N.M., About compression fracture, Phys. Mesomech., 2019, vol. 22, no. 6, pp. 439–455.10.1134/S1029959919060018 ↗
7. Korotaev, A.D., Litovchenko, I.Y., and Ovchinnikov, S.V., Structural-phase state, elastic stress, and functional properties of nanocomposite coatings based on amorphous carbon, Phys. Mesomech., 2019, vol. 22, no. 6, pp. 488–495.10.1134/S1029959919060055 ↗
8. Dutta, S., Pal, S.K., and Sen, R., Progressive tool flank wear monitoring by applying discrete wavelet transform on turned surface images, Measurement, 2016, vol. 77, pp. 388–401.10.1016/j.measurement.2015.09.028 ↗
9. Astafieva, N.M., Wavelet analysis: Theory foundations and application examples, Usp. Fiz. Nauk, 1996, vol. 166, no. 11, pp. 1145–1170.10.3367/UFNr.0166.199611a.1145 ↗
10. Syryamkin, V.I., Glushkov, G.S., Borodin, V.A., and Zhdanov, D.S., Integrated optoacoustic-television methods for the nondestructive testing of solid nanomaterials, Russ. J. Nondestr. Test., 2011, vol. 47, no. 11, pp. 754–764.10.1134/S1061830911110076 ↗
11. Kuznetsov, P.V., Panin, V.E., and Schreiber, J.S., Fractal dimension as a characteristic of deformation stages of austenite stainless steel under tensile load, Theor. Appl. Fract. Mech., 2001, vol. 35, pp. 171–177.10.1016/S0167-8442(00)00058-6 ↗
12. Bhat, N.N., Kumari, K., Dutta, S., Pal, S.K., and Pal, S., Friction stir weld classification by applying wavelet analysis and support vector machine on weld surface images, J. Manuf. Process., 2015, vol. 20, pp. 274–281.10.1016/j.jmapro.2015.07.002 ↗
13. Panin, A.V., Shugurov, A.R., and Schreiber, J., Fractal analysis of electromigration-induced changes of surface topography in Au conductor lines, Surf. Sci., 2003, vol. 524, nos. 1–3, pp. 191–198.10.1016/S0039-6028(02)02533-5 ↗
14. Panin, S.V., Shakirov, I.V., Syryamkin, V.I., and Svetlakov, A.A., Application of wavelet analysis of surface images to studying the processes of plastic deformation and fracture at the mesoscale level, Avtometriya, 2003, vol. 39, no. 1, pp. 37–53.
15. Feder, J., Fractals, New York: Springer, 1988.10.1007/978-1-4899-2124-6 ↗
16. Stout, K.J. and Blunt, L., Three Dimensional Surface Topography, Amsterdam: Elsevier, 2000.
17. Panin, S.V., Altukhov, Yu.A., Lyubutin, P.S., Byakov, A.V., and Khizhnyak, S.A., Application of fractal dimension to assessing surface images obtained by various sensors, Avtometriya, 2013, vol. 49, no. 1, pp. 42–49.
18. Oliver, W.C. and Pharr, G.M., An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J. Mater. Res., 1992, vol. 7, no. 6, pp. 1564–1583.10.1557/JMR.1992.1564 ↗
19. Douketis, C., Wang, Z., Haslett, T.L., and Moskovits, M., Fractal character of cold-deposited silver films determined by low-temperature scanning tunneling microscopy, Phys. Rev. B, 1995, vol. 51, no. 16, p. 11022.10.1103/PhysRevB.51.11022 ↗
20. Daubechies, I., The wavelet transform, time-frequency localization and signal analysis, IEEE Trans. Inf. Theory, 1990, vol. 36, no. 5, pp. 961–1005.10.1109/18.57199 ↗
21. Tsui, T.Y., Pharr, G.M., Oliver, W.C., Bhatia, C.S., White, R.L., Anders, S., Anders, A., and Brown, I.G., Nanoindentation and nanoscratching of hard carbon coatings for magnetic disks, Mater. Res. Soc. Symp. Proc., 1995, vol. 383, pp. 447–452.10.1557/PROC-383-447 ↗
22. Leyland, A. and Matthews, A., On the significance of the H/E ratio in wear control: A nanocomposite coating approach to optimised tribological behavior, Wear, 2000, vol. 246, pp. 1–11.10.1016/S0043-1648(00)00488-9 ↗
23. Musil, J., Kunc, F., Zeman, H., and Poláková, H., Relationships between hardness, Young’s modulus and elastic recovery in hard nanocomposite coatings, Surf. Coat. Technol., 2002, vol. 154, pp. 304–313.10.1016/S0257-8972(01)01714-5 ↗
24. Panin, S.V., Syryamkin, V.I., and Glukhikh, A.I., Application of spectral analysis of surface images to studying fatigue fracture processes at the mesoscale level, Avtometriya, 2003, vol. 39, no. 4, pp. 79–92.