The effect of equal channel angular pressing on the mechanical and magnetic properties of 09Γ2C steel
Source abstract
Abstract
The physical and mechanical properties of 09Γ2C steel that was subjected to strengthening by intense plastic deformation using the method of equal channel angular pressing (ECAP) are studied. An unambiguous interrelationship between the magnetic (coercive force, maximal permeability, Barkhausen magnetic noise parameters) and mechanical (rupture limit, conditional yield strength, relative elongation and narrowing upon damaging) characteristics of 09Γ2C steel, which was strengthened using ECAP following different technological regimes, is demonstrated. Therefore, it is possible to estimate the strength and plasticity characteristics of the analyzed material based on the measurement of its magnetic parameters. It has been revealed that under conditions of uniaxial tension in the range from 0 to (0.2–0.6) of the conditional yield strength (depending on the ECAP regime), it is possible to diagnose changes in the stressed state of items that are made of 09Γ2C steel that is hardened in accordance with the ECAP technique using magnetic structuroscopy methods.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Material Properties and Failure Mechanisms · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Lyakishev, N.P. and Alymov, M.I., Nanomaterials of Structural Purpose, Ross. Nanotekhnol., 2006, vol. 1, nos. 1–2, pp. 71–81.
2. Valiev, R.Z. and Langdon, T.G., Principles of Equal-Channel Angular Pressing as a Processing Tool for Grain Refinement, Prog. Mater. Sci., 2006, vol. 50, pp. 881–981.10.1016/j.pmatsci.2006.02.003 ↗
3. Gunderov, D.V., Prokof’ev, E.A., Luk’yanov, A.V., et al., Structure and Properties of TiNi Alloy Subjected to Equal Channel Angular Pressing in Accordance with CONFORM Scheme, Materialovedenie, 2010, no. 8, pp. 45–51.
4. Murashkin, M.Yu., Bobruk, E.V., Kil’mametov, A.R., and Valiev, R.Z., Structural Peculiarities and Mechanical Properties of 6061 Aluminum Alloy Subjected to Treatment with Equal Channel Angular Pressing in Parallel Channels, Fiz. Met. Metalloved., 2009, vol. 108, no. 4, pp. 439–447.
5. Korshunov, A.I., Smolyakov, A.A., Kravchenko, T.N., Polyakov, L.V., Kaganova, I.I., and Korotchenkova, I.V., Quality of Mechanical Properties of Metals and Alloys after Equal Channel Angular Pressing, Fiz. Tekh. Vys. Davlenii, 2008, vol. 18, no. 4, pp. 87–94.
6. Valiev, R.Z. and Aleksandrov, I.V., Nanostrukturnye materialy, poluchennye intensivnoi plasticheskoi deformatsiei (Nanostructural Materials Obtained Using Intense Plastic Deformation), Moscow: Logos, 2000.
7. Valiev, R.Z. and Aleksandrov, I.V., Ob’emnye nanostrukturnye metallicheskie materialy (Bulk Nanostructural Metallic Materials), Moscow: IKTs Akademkniga, 2007.
8. Noskova, N.I. and Mulyukov, R.R., Submikrokristallicheskie i nanokristallicheskie metally i splavy (Submicron Crystalline and Nanocrystalline Metals and Alloys), Yekaterinburg: UrO RAN, 2003.
9. Rosochowski, A., Olejnik, A., and Richert, M., Abstracts of Papers, Proc. Int. Conf. Metal. Forming, Krakow, 2004.
10. Rusakov, A.A., Rentgenografiya metallov (Radiography of Metals), Moscow: Atomizdat, 1977.
11. Astafurov, E.G., Zakharova, G.G., Naidenkin, E.V., Raab, G.I., and Dobatkin, S.V., Structure and Mechanical Properties of Low-Carbon Ferrite-Pearlite 10Γ2ΦT Steel after Intense Plastic Deformation and Subsequent High-Temperature Annealing, Fiz. Mezomekh., 2010, vol. 13, no. 4, pp. 91–101.
12. Vonsovskii, S.V. and Shur, Ya.S., Ferromagnetizm (Ferromagnetism), Moscow: OGIZ, 1948.
13. Dunaev, F.N., Magnetic Structure of Elastically Extended Transformer Steel, Izv. VUZov, Ser. Fiz., 1962, no. 1, pp. 151–153.
14. Zaikova, V.A. and Shur, Ya.S., The Effect of Tension on Magnetic Properties and Magnetostriction Curves of Silicon Iron, Fiz. Met. Metalloved., 1966, vol. 21, no. 5, pp. 664–673.
15. Aleksandrov, M.P., Kolobov, L.N., Lobov, N.A., Nikol’skaya, T.A., and Polkovnikov, V.S., Gruzopod’emnye mashiny (Hoisting Machines), Moscow: Mashinostroenie, 1986.