journal article·2012-12

On complex permeability in eddy-current flaw detection

Yu. Ya. Reutov, V. E. Shcherbinin

Publisher page

Abstract

This paper critically considers attempts to prove the frequency dependences of the electrical conductivity and magnetic permeability of metals at frequencies lower than 1 MHz. Such attempts were made by certain authors when studying the operation of eddy-current transducers. It is shown that the complex character of the output voltage of an eddy-current transducer is determined by the vector summation of the magnetic fluxes of the primary magnetizing alternating field and the field of eddy currents, which are induced by the primary field, in a tested article. The frequency dependence of the results of this summation is quite sufficient for a physically correct description of the operation of an eddy-current transducer without involving a hypothesis on the frequency dependence of the physical constants of the material of the tested article.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Non-Destructive Testing Techniques · Material Properties and Failure Mechanisms · Engineering Diagnostics and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Forster, F. and Stambke, P., Theoretische und experimentelle Grundlagen der zerstorungsfreien Werstoffprufung mit Wirbelstromverfahren, Zeitschrift fur Metallkunde, 1954, p. 45.
2. Rodigin, N.M. and Korobeinikova, I.E., Kontrol’ kachestva izdelii metodom vikhrevykh tokov (Quality Control of Articles by the Eddy-Current Method), Moscow-Sverdlovsk: Mashgiz, 1958.
3. Batygin, V.V. and Toptygin, I.N., Sbornik zadach po elektrodinamike (Collection of Problems on Electrodynamics), Moscow, 2002.
4. Sandovskii, V.A., Consideration of the Frequency Dependence of Electrodynamic Parameters of Metals in Calculations of Transmission-Type Eddy-Current Transducers, Defektoskopiya, 1995, no. 10, pp. 32–37.
5. Sandovskii, V.A., Dyakin, V.V., and Dudarev, M.S., On the Frequency Dependence of the Magnetic Permeability during Testing with Attachable Transducers, Defektoskopiya, 1997, no. 1, pp. 63–66.
6. Sandovskii, V.A., Akshentsev, Yu.N., and Kurmaeva, L.D., Studying the Frequency Dependence of the Permeability in Iron-Silicon Alloys of Different Purities, Defektoskopiya, 1998, no. 2, pp. 23–31.
7. Sandovskii, V.A., Dyakin, V.V., and Dudarev, M.S., Frequency Dependence of the Magnetic Permeability of Hollow Cylindrical Ferromagnetic Pieces, Defektoskopiya, 2000, vol. 36, no. 3, pp. 210–217.
8. Burtsev, G.A., Transmission-Type Eddy-Current Transducers for Testing Ferromagnetic Articles of Finite Lengths, Defektoskopiya, 1973, no. 4, pp. 110–118.
9. Burtsev, G.A., On Dynamics of Magnetization Reversal of Ferromagnetic Rods of Finite Lengths in Weak Magnetic Fields, Defektoskopiya, 1973, no. 5, pp. 34–42.
10. Reutov, Yu.Ya., Gobov, Yu.L., and Loskutov, V.E., Feasibilities of Using the ELCUT Software for Calculations in Nondestructive Testing, Rus. J. Nondestr. Test., 2002, vol. 38, no. 6, pp. 425–430.10.1023/A:1022174825844 ↗
11. Nerazrushayushchii kontrol’ (Nondestructive Testing) Klyuev, V.V., Eds., Moscow: Mashinostroenie, 2005, vol. 2.
12. Chechernikov, V.I., Magnitnye izmereniya (Magnetic Measurements), Moscow: MGU, 1963.
13. Kifer, I.I., Ispytaniya ferromagnitnykh materialov (Testing of Ferromagnetic Materials), Moscow: Gosenergoizdat, 1962.
14. Zatsepin, N.N., Klyuev, V.V., and Fedosenko, Yu.K., A Selective Electromagnetic Method for Calculating Geometric and Magnetic Parameters of Hollow Cylindrical Ferromagnetic Bodies, Kontrol’. Diagnostika, 2011, no. 6, pp. 62–68.
15. Sandovskii, V.A., Diagnostics of Magnetic Materials using the Frequency Dependence of the Magnetic Permeability in the Resonance Region, Kontrol’. Diagnostika, 2012, no. 2, pp. 64–69.