Reference Blocks for Penetrant Testing
Source abstract
Abstract
Abstract Reference specimens for penetrant testing have been developed that allow optical microscope assisted measurements of both the opening width of surface defects and their depth with the simultaneous condition that defect cavities do not extend onto the side faces of the blocks. Experimental data on the dependence of the defect indication areas after their development on their width (0.5–8.5 μm) and depth (40–860 mm) are presented. Using correlation analysis, the statistical significance of the above parameters is demonstrated.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Sensor Technologies Research · Electromagnetic Launch and Propulsion Technology · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. GOST (State Standard) R ISO 3452-2–2009. Nondestructive testing. Penetrant testing. Part 2. Testing of penetrant materials, Moscow: Standartinform, 2011.
2. GOST (State Standard) R ISO 3452-3–2009. Nondestructive testing. Penetrant testing. Part 3. Reference test blocks, Moscow: Standartinform, 2011.
3. GOST (State Standard) 18442–80. Nondestructive testing. Penetrant testing methods. General requirements, Moscow: Izd-vo Standartov, 1987.
4. GOST (State Standard) R 50.05.09–2018. Conformity assessment system in the field of nuclear energy use. Conformity assessment in the form of control. Unified methods. Penetrant testing, Moscow: Standartinform, 2018.
5. RD-13-06–2006: Methodological recommendations on the procedure for carrying out penetrant testing of technical devices and structures used and operated at hazardous production facilities, 2011.
6. STB 1172–99. Nondestructive testing. Penetrant testing. General requirements, Minsk: BelGISS, 1999.
7. Migoun, N.P., Delenkovskii, N.V., and Gnusin, A.B., New means for determining the sensitivity of product families for penetrant testing, Metrol. Priborostr., 2007, no. 2, pp. 16–18.
8. Delenkovskii, N.V. and Gnusin, A.B., Estimation of the depth of surface defects in penetrant testing, Russ. J. Nondestr. Test., 2017, no. 3, pp. 74–78.10.1134/S1061830917030044 ↗
9. Delenkovsky, N.V., RB utility model patent no. 13255. Reference block for penetrant flaw detection, Republic of Belarus, National Center for Intellectual Property, 2023.
10. Migoun, N.P., Gnusin, A.B., and Volovich, I.V., A computerized system determines the quality of penetrant materials, Prom. Bezop., 2004, no. 1, pp. 34–36.