Effect of Anisotropy on Residual Stress Measurement of 316L Stainless Steel by Ultrasonic Surface Wave
Source abstract
Abstract
Abstract Fe–Cr alloys are widely used in power, petroleum, and manufacturing industries for their good resistance to corrosion and oxidation at high temperatures. Ultrasound is the only nondestructive method so far to measure the residual stress of in-service components. However, for parts with material anisotropy, such as materials processed by rolling, the measurement accuracy is highly restrained. In this paper, a rolled 316L stainless steel sample is used to study the influence of texture on the measurement of residual stress by ultrasonic surface wave. The experimental results show that the propagation velocity of surface waves in the sample has anisotropic characteristics. The wave velocity parallel to the rolling direction (0°) is the maximum, and the wave velocity perpendicular to the rolling direction (90°) is the minimum, thereby affecting the measurement accuracy. It is found that reducing the frequency of surface waves can reduce the influence of anisotropy. Therefore, a low-frequency method and modified formula are used to improve the measurement accuracy. The maximum error in the rolling direction is reduced from 21.3 to 3.6 MPa, and the maximum relative error is also reduced from 45.4 to 9.0%. The modified formula can further reduce the influence of anisotropy, with the maximum error value further reduced to 2.3 MPa, the maximum relative error reduced to 4.9%, and the surface wave detection accuracy effectively improved.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Ultrasonics and Acoustic Wave Propagation · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Yashar Javadi, Seyedali Sadeghi, and Mehdi Ahmadi Najafabadi, Taguchi optimization and ultrasonic measurement of residual stresses in the friction stir welding, Mater. Des., 2014, vol. 55, pp. 27–34.10.1016/j.matdes.2013.10.021 ↗
2. Chen Yong, Chen Hui, Jiang Yishuai, et al., Research status of stress and deformation control of high-performance metal materials in laser additive manufacturing, Mater. Eng., 2019, vol. 47, no. 11, pp. 1–10.
3. Beghini, M., Bertini, L., and Santus, C., A procedure for evaluating high residual stresses using the blind hole drilling method, including the effect of plasticity, J. Strain Anal. Eng. Des., 2010, vol. 45(4), pp. 301–318.10.1243/03093247JSA579 ↗
4. Carlsson, S. and Larsson, P.L., On the determination of residual stress and strain fields by sharp indentation testing. Part I: Theoretical and numerical analysis, Acta Mater., 2001, vol. 49, no. 12, pp. 2179–2191.10.1016/S1359-6454(01)00122-7 ↗
5. Sedighi, M. and Nazemnezhad, R., Effect of peak positioning method on accuracy of X-ray diffraction residual stress measurement, Exper. Tech., 2016, vol. 40, no. 1, pp. 295–302.10.1007/s40799-016-0033-9 ↗
6. Nikulin, V.E., Parshin, S.G., and Levchenko, A. M., Study of residual welding stresses for underwater wet welding of low-alloy steel using magnetic anisotropic and X-ray diffractometry methods, Russ. J. Nondestr. Test., 2021, vol. 57, no. 8, pp. 692–705.10.1134/S1061830921080076 ↗
7. Xu Xiaoyan, Lv Yuting, Zhang Di, et al., Research progress of measuring residual stress by neutron diffraction, Mater. Herald, 2015, vol. 29, no. 9, pp. 117–122.
8. Yu Fujin, Zhao Yanwei, and Zhang Kehua, Research and development of ultrasonic testing of surface residual stress, Surf. Technol., 2007, vol. 036 (004), pp. 72–75.
9. Acevedo, R., Sedlak, P., Kolman, R., and Fredel, M., Residual stress analysis of additive manufacturing of metallic parts using ultrasonic wavespp. State of the art review, J. Mater. Res. Technol., 2020, vol. 9, no. 4, pp. 9457–9477.10.1016/j.jmrt.2020.05.092 ↗
10. Ebrahimi, A., Bayat, M., and Norouzi, E., Measurement of residual stress using the ultrasonic method in aluminum welding: FE analysis and experimental study, Russ. J. Nondestr. Test., 2021, vol. 57, no. 8, pp. 669–678.10.1134/S1061830921080027 ↗
11. Javadi, Y., Najafabadi, M.A., and Akhlaghi, M., Residual stress evaluation in dissimilar welded joints using finite element simulation and the ultrasonic wave, Russ. J. Nondestr. Test., 2012, vol. 48, no. 9, pp. 541–552.10.1134/S1061830912090033 ↗
12. Duquennoy, M., Ouaftouh, M., Qian, M.L., Jenot, F., and Ourak, M., Ultrasonic characterization of residual stresses in steel rods using laser line source and piezoelectric transducers, NDT & E Int., 2001, vol. 34, no. 5, pp. 355–362.10.1016/S0963-8695(00)00075-X ↗
13. Zhan, Y., Li, Y., Zhang, E., Ge, Y., and Liu, C., Laser ultrasonic technology for residual stress measurement of 7075 aluminum alloy friction stir welding, Appl. Acoust., 2019, pp. 52–59.10.1016/j.apacoust.2018.09.010 ↗
14. Dymkin, G.Ya., Krasnobrizhii, S.A., and Shevelev, A.V., An ultrasonic method for measuring residual mechanical stresses in the rims of solid-rolled railroad wheels that considers the intrinsic anisotropy of the material, Russ. J. Nondestr. Test., 2013, vol. 49, no. 1, pp. 8–14.10.1134/S106183091301004X ↗
15. Vasil’ev, A.V., Biryukov, D.Yu., and Zatsepin, A.F., Ultrasonic testing of butt joints in electric steel plates using Lamb waves, Russ. J. Nondestr. Test., 2023, vol. 59, no. 1, pp. 11–21.10.1134/S1061830923700171 ↗
16. Qin, W., Shirun, D., Xu, B., et al., Ultrasonic birefringence method for measuring internal stress of aluminum alloys, Appl. Acoust., 2008, vol. 27, no. 5, pp. 401–406.
17. Liu, Q. and Wirdelius, H., A 2D model of ultrasonic wave propagation in an anisotropic weld, NDT & E Int., 2007, vol. 40, no. 3, pp. 229–238.10.1016/j.ndteint.2006.10.004 ↗
18. King, R.B. and Fortunko, C.M., Surface residual stress evaluation using horizontally polarized shear waves, J. Appl. Phys., 1984, vol. 55, no. 11, pp. 3978–3983.10.1063/1.332984 ↗
19. Chen, H. and Zhu, J.D., Measurement of welding residual stress by ultrasonic technology, Appl. Mech. Mater., 2015, vol. 750, pp. 206–213.10.4028/www.scientific.net/AMM.750.206 ↗
20. Chen, H. and Wang, S., Elastic anisotropy of rolled sheet, Rare Met. Mater. Eng., 1982, no. 3, pp. 4–13.
21. Yin, A., Cheng, T., Wang, X., et al., Study on the propagation characteristics of laser ultrasonic surface waves in polycrystalline texture materials, Laser Mag., 2018, vol. 39, no. 1, pp. 83–88.
22. Dong, S., Xiaoling, Y., and Xu, B., Microstructure and residual stress on Rayleigh wave influence of valence laser cladding layer stress, J. Mech. Eng., 2015, vol. 51 (24), pp. 50–56.10.3901/JME.2015.24.050 ↗
23. Xiaoling, Y., Yong, C., and Dong, S., Ultrasonic nondestructive evaluation of laser cladding remanufacturing coating stress, Mater. Eng., 2018, vol. 46 (10), pp. 96–103.