Ultrasonic method for determination of elastic moduli—Numerical simulation and experimental results
Source abstract
Abstract
In this work, a numerical simulation and experimental results using a modified prism technique are presented. It is based on pulse-echo technique and involves the measurement of both longitudinal and transversal waves velocities in trapezoidal-prism shaped specimens with only one transducer. Both longitudinal and transversal waves are generated through mode conversion at the interface between water and the specimen under test. Based on numerical simulation with the 2-D Elastodynamic Finite Integration Technique (EFIT), several snapshots are generated to illustrate the functionality of this new technique, and the experiment was performed on cement paste with various water/cement ratios.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Geophysical Methods and Applications · Ultrasonics and Acoustic Wave Propagation · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Bar, R., Supersonic Measurement of Elastic Constants of Isotropic Solids, Helv. Phy. Acta, 1940, vol. 13.
2. Schneider, W.C. and Burton, C.J., Determination of the Elastic Constants by Ultrasonic Methods, J. Applied Physics, 1949, vol. 20, pp. 48–58.10.1063/1.1698236 ↗
3. Reynolds, M.B., The Determination of the Elastic Constants by the Ultrasonic Pulse Technique, Trans. Am. Soc. Metals, 1953, vol. 45, pp. 839–861.
4. Rao, B.R. and Rao, P.V., Nature, 1954, vol. 174, p. 835.10.1038/174835a0 ↗
5. Breezeale, M.A. and Hiedemann, E.A., J. Acoust. Soc. Am., 1955, vol. 27, p. 1220.10.1121/1.1908168 ↗
6. Mayer, W., Energy Partition of Ultrasonic Waves at Solid-Liquid Boundaries, Ultrasonics, 1965, vol. 3, pp. 62–68.10.1016/0041-624X(65)90002-8 ↗
7. Krauträmer, H. and Krauträmer, J., Ultrasonic Testing of Materials, Berlin Heidelberg: Springer-Verlag, 1990, 4rd ed.10.1007/978-3-662-10680-8 ↗
8. Kundu, T., Ultrasonic Non-destructive Evaluation: Engineering and Biological Material Characterization, Boca Raton London New York Washington: CRC PRESS, 2004.
9. Marklein, R., The Finite Integration Technique as a General Tool to Compute Acoustic, Electromagnetic, Elastodynamic, and Coupled Wave Fields, IEEE Press and John Wiley and Sons, 2002, p. 201–244.
10. Weiland, T., A Discretization Method for the Solution of Maxwell’s Equations for Six-Component Fields, Electronics and Communications AEU, 1977, vol. 31, no. 3, pp. 116–120.
11. Fellinger, P., Marklein, R., and Langenberg K.J., Numerical Modeling of Elastic Wave Propagation and Scattering with EFIT-Elastodynamic Finite Integration Technique, Wave Motion, 1995, vol. 21, pp. 47–66.10.1016/0165-2125(94)00040-C ↗
12. Grimes, M., Ultrasonic Wave Dispersion and Attenuation in Fresh Cementitious Materials (NDTCE’09 Proceedings, Nantes), France, 2009, pp. 635–640.
13. Bouhadjera, A., An Improved Design of an Ultrasonic Apparatus for Characterizing Material Samples, Insight, 2004, vol. 46, pp. 554–558.10.1784/insi.46.9.554.40842 ↗
14. Abo-Qudais, S.A., Effect of Concrete Mixing Parameters on Propagation of Ultrasonic Waves, Construction and Building Materials, 2005, vol. 19, pp. 257–263.10.1016/j.conbuildmat.2004.07.022 ↗
15. Al-Akhras, N., Characterization and Deterioration Detection of Portland Cement Concrete Using Ultrasonic Waves, Ph.D. Dissertation, Civil Engineering Department, Blacksburg, USA: Virginia Polytechnic Institute and State University, 1995.
16. Kaplan, M.F., The Effects of Age and Water to Cement Ratio Upon the Relation Between Ultrasonic Pulse Velocity and Compressive Strength of Concrete, Mag. Concr. Res., 1959, vol. 11, no. 32, pp. 85–92.10.1680/macr.1959.11.32.85 ↗
17. Vivian, W.Y. Tarn and Khoa, N. Le, Aggregate Testing Using 2nd-, 7th- and 10th-order Interpolation Polynomials, Resources, Conservation and Recycling, 2007, vol. 52, pp. 39–57.10.1016/j.resconrec.2007.02.001 ↗