Developing a Method for Assessing the Degree of Hydrogenation of VT1-0 Titanium Alloy by the Acoustic Method
Source abstract
Abstract
Abstract The possibilities of using a nondestructive acoustic method to determine the degree of hydrogenation of VT1-0 titanium alloy are investigated. The features of using various acoustic parameters to construct computational and experimental methods for determining the porosity of titanium alloy at various stages of its hydrogenation are analyzed. The sources of errors of the proposed methods, the limits of their applicability, as well as the requirements for hardware and software for their implementation are considered. The results of acoustic measurements carried out on samples made of VT1-0 alloy are compared with the ideas about the patterns of its structural changes during hydrogenation process. The possibility is shown for creating engineering algorithms based on the obtained experimental data for assessing the state of the product material subjected to hydrogenation in order to prevent dangerous degradation of its operational properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Properties and Failure Mechanisms · Engineering Diagnostics and Reliability · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Khlybov, A.A., Ryabov, D.A., Shishulin, D.N., and Pichkov, S.N., Physical acoustics methods for assessing hydrogen embrittlement in PT-7M grade titanium alloy, Inorganic Mater. Appl. Res., 2023, vol. 14, no. 1, pp. 164–171. https://doi.org/10.1134/S207511332301017310.1134/S2075113323010173 ↗
2. Shchur, D.V., Zaginaichenko, S.Yu., Veziroglu, A., Veziroglu, T.N., Zolotarenko, A.D., Gabdullin, M.T., Ramazanov, T.S., Zolotarenko, A.D., and Zolotarenko, A.D., Features of the study of atomic hydrogen–metal systems, Al’tern. Energ. Ekol., 2019, nos. 13–15, pp. 62–87.10.15518/isjaee.2019.13-15.62-87 ↗
3. Laadel Nour-Eddine, Mansori Mohamed El, Kang Nan, Marlin Samuel, and Boussant-Roux Yves, Permeation barriers for hydrogen embrittlement prevention in metals – A review on mechanisms, materials suitability and efficiency, Int. J. Hydrogen Energ., 2022, vol. 47, no. 76, pp. 32707–32731.10.1016/j.ijhydene.2022.07.164 ↗
4. Verkhovskiy, A.E., Gadzhiev, K.G., Urtenov, D.S., and Gadzhiev, D.K., The effect of hydrogenation and temperature on the performance characteristics of a titanium alloy, Int. Sci. Res. J., 2021, no. 1(103), pp. 57–60.
5. Kantyukov, R.R., Zapevalov, D.N., and Vagapov, R.K., Investigation of the effect of hydrogen on steel in hydrogen sulfide-containing and other media at gas facilities, Izvestiya Vysshikh Uchebnykh Zavedenii. Chyornaya Metallurgiya, 2024, no. 67(1), pp. 53–64. https://doi.org/10.17073/0368-0797-2024-1-53-6410.17073/0368-0797-2024-1-53-64 ↗
6. Chernov, I.P., Cherdantsev, Yu.P., Mamontov, A.P., Panin, A.V., Nikitenkov, N.N., Lider, A.M., and Garanin, G.V., Nondestructive methods of control of hydrogen embrittlement of structural materials, Al’tern. Energ. Ekol., 2009, no. 2, pp. 15–22.
7. Lider, A.M., Larionov, V.V., Garanin, G.V., and Krening, M.H., The method of ultrasonic determination of hydrogen in titanium-based materials and products, J. Tech. Phys., 2013, vol. 83(9), pp. 157–158.
8. Polyansky, V.A., Belyaev, A.K., Polyansky, A.M., Tretyakov, D.A., and Yakovlev, Yu.A., Hydrogen brittleness as a result of surface phenomena during deformation of metals, Phys. Mesomech., 2022, vol. 25(3), pp. 27–37.
9. Gomes, P.M., Domizzi, G., Lopez Pumagera, M.I., and Ruzzante, J.E., Characterization of hydrogen concentration in Zircaloy-4 using ultrasonic techniques, J. Nucl. Mater., 2006, vol. 353, pp. 167–176.10.1016/j.jnucmat.2006.01.024 ↗
10. Chunjie, Y., Wenbin, K., Yongfeng, L., and Hongliang, P., Experimental study of hydrogen embrittlement on AISI 304 stainless steels and Rayleigh wave characterization, Eng. Fail. Anal., 2013, vol. 34, pp. 228–234.10.1016/j.engfailanal.2013.07.021 ↗
11. Yebo, L., Wenbin, K., and Hongliang, P., Effect of hydrogen concentration on the ultrasonic propagation properties in 304 stainless steel, Proc. Int. Conf. Fracture 12 (Ottawa, 2009).
12. Khlybov, A.A., Uglov, A.L., Bakiev, T.A., and Ryabov, D.A., Assessment of the degree of damage in structural materials using the parameters of structural acoustic noise, Nondestr. Test. Eval., 2022, vol. 38(2), pp. 331–350. https://doi.org/10.1080/10589759.2022.212647010.1080/10589759.2022.2126470 ↗
13. Khlybov, A.A. and Uglov, A.L., On the use of structural noise parameters in testing 20GL steel with Rayleigh surface waves under elastoplastic deformation, Russ. J. Nondestr. Test., 2021, vol. 57, no. 7, pp. 517–524.10.1134/S1061830921070081 ↗
14. Kachanov, V.K., Sokolov, I.V., Pervushin, V.V., and Timofeev, D.V., Structure analysis of products made of polymer materials using instantaneous spectra of ultrasonic signals, Russ. J. Nondestr. Test., 2019, vol. 55, no. 6, pp. 427–433.10.1134/S1061830919060056 ↗
15. Romanishin, R.I. and Romanishin, I.M., Assessment of scattered damage in structural materials, Russ. J. Nondestr. Test., 2019, vol. 55, no. 2, pp. 111–121.10.1134/S1061830919020086 ↗
16. Kartashev, V.G., Kachanov, V.K., Sokolov, I.V., Voronkova, L.V., and Kontsov, R.V., Pattern-noise in ultrasonic inspection of articles made of complexly structured materials, Russ. J. Nondestr. Test., 2018, vol. 54, no. 1, pp. 17–30.10.1134/S1061830918010047 ↗
17. Romanishin, R.I. and Romanishin, I.M., Processing of backscattered signal in ultrasonic testing, Russ. J. Nondestr. Test., 2018, vol. 54, no. 6, pp. 394–399.10.1134/S1061830918060074 ↗
18. Hirsekorn, S., Van Andel, P.W., and Netzelmann, U., Ultrasonic methods to detect and evaluate damage in steel, NDT & E Int., 1998, vol. 15, no. 6, pp. 373–393.
19. Han, Y.K. and Thompson, R.B., Ultrasonic backscattering in duplex microstructures: Theory and application to titanium alloys, Metall. Mater. Trans. A, 1997, vol. 28, pp. 91–104.10.1007/s11661-997-0085-7 ↗
20. Khlybov, A.A., Uglov, A.L., and Demchenko, A.A., On spectral-acoustic method for estimating porosity of metals produced by hot isostatic pressing, Russ. J. Nondestr. Test., 2022, vol. 58, no. 12, pp. 1051–1063.10.1134/S1061830922700097 ↗
21. Saraev, L.A., On the theory of elasticity of micro-homogeneous media, taking into account stochastic changes in the connectivity of the constituent components, Vestn. Perm. Polytekh. Univ. Mech., 2021, vol. 2, pp. 132–143. https://doi.org/10.15593/perm.mech/2021.2.1210.15593/perm.mech/2021.2.12 ↗
22. Mishakin, V.V., Gonchar, A.V., Kurashkin, K.V., Klyushnikov, V.A., and Kachanov, M., On low-cycle fatigue of austenitic steel. Part I: Changes of Poisson’s ratio and elastic anisotropy, Int. J. Eng. Sci., 2021, vol. 168, p. 103567.10.1016/j.ijengsci.2021.103567 ↗
23. Kachanov, M., Mishakin, V.V., and Pronina, Yu., On low cycle fatigue of austenitic steel. Part II: Extraction of information on microcrack density from a combination of the acoustic and eddy current data, Int. J. Eng. Sci., 2021, vol. 169, p. 103569.10.1016/j.ijengsci.2021.103569 ↗
24. Murav’ev, V.V. and Baiteryakov, A.V., Effect of traffic volume on acoustic structural noises in rails, Russ. J. Nondestr. Test., 2016, vol. 52, no. 11, pp. 657–663.10.1134/S1061830916110073 ↗
25. Murav’ev, V.V., Kotolomov, A.Yu., Bayteryakov, A.V., and Dedov, A.I., Determination of metal grain size by acoustic structural noise, Izvestiya Vysshikh Uchebnykh Zavedenii. Chyornaya Metallurgiya, 2014, vol. 57(11), pp. 65–69. https://doi.org/10.17073/0368-0797-2014-11-65-6910.17073/0368-0797-2014-11-65-69 ↗
26. Sergienko, B.A., Tsifrovaya obrabotka signalov (Digital Signal Processing), St. Petersburg: Piter, 2006.
27. Hamming, R.W., Digital Filters, Englewood Cliffs, NJ, Prentice-Hall, 1977. Translated under the title: Tsifrovye fil’try, Moscow: Nedra, 1987.
28. Hayes, M.H., Statistical Digital Signal Processing and Modeling, Hoboken: Wiley, 2009.
29. Welch, P., The use of the fast Fourier transform for the estimation of power spectra: A method based on time averaging over short, modified periodograms, IEEE Trans. Audio Electroacoust., 1967, vol. 15, pp. 70–73.10.1109/TAU.1967.1161901 ↗