Dependence of Signal from Continuous X-ray Sensor on Values of Technological Parameters in Hybrid Additive Process of Electron Beam Surfacing by Wire
Source abstract
Abstract
The relevant problem in the process of electron beam surfacing with wire material is the positioning of the filler wire relative to the electron beam. The accuracy of the beam positioning relative to the wire significantly affects the nature of heat input, the processes of transfer of molten metal from the wire to the base, and, as a consequence, the nature of the formation of the roller. To build a full-fledged process control system, an adequate mathematical model is needed that describes the formation of the signal depending on the beam displacement relative to the wire and other technological parameters. In the article, we obtain a model in the form of an approximation of the integral expression of the dependence of the signal from the X-ray sensor on the values of technological parameters.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Engineering and Environmental Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Morozov, M.Y., Braverman, V.Y., Mednikov, D.M., Electron beam welding and beam positioning, Akt. Probl. Aviats. Kosmonavt., 2015, vol. 2, no. 11, pp. 1020–1021.
2. Norman, L.J. and Fred, G.L., Statistics and Experimental Design in Engineering and Physical Sciences, New York: Wiley, 1997, pp. 70–74. 2nd ed.
3. Permyakov, G., Trushnikov, D., and Varushkin, S., Numerical simulation of electron beam welding of dissimilar materials taking into account thermoelectric phenomena, Int. Symp. Vis. Join. Weld. Sci. Adv. Meas. Simul. Symp. Res. Act. Jt. Usage (Osaka, 2016), pp. 197–198.
4. Panten, M., Eichhom, F., and Spies, B., Diagnosis of high energy density electron beam on electron beam welding machines with a new compact measuring equipment, 4eme Collog. Int. Coudage Fision Faisceau Electrons Laser (Cannes, 1988), vol. 1, pp. 53–60.
5. Trushnikov, D.N. and Varushkin, S.V., RF Patent no RU 2704682 C1, 2019.
6. Trushnikov, D.N., Wire position sensor for controlling the process of electron beam layer-by-layer deposition: Modeling and verification, Sensors, 2020, vol. 21, no. 3, pp. 3134–3142.
7. Rentgenovskie luchi (X-rays), Blokhin, M.A., Ed., Moscow: Izd. Inostr. Lit., 1960.
8. Kharaja, F.N., Obschii kurs rentgenotekniki (General Course of X-ray Engineering), Moscow: Energiya, 1966.
9. Sasaki, S., Murakami, H., Iwami, T., and Yasunaga, S., Automatic weld line sensing and work positioning for electron beam welding, Q. J. Jpn. Weld. Soc., 1985, vol. 3, no. 1, pp. 16–21.10.2207/qjjws.3.16 ↗
10. Braverman, V.Ya., Belozertsev, V.S., and Uspenskii, A.N., Experimental studies of X-ray radiation during electron beam welding, Vestn. Sib. Aerokosm. Univ., 2005, no. 2, pp. 196–200.
11. Braverman, V.Ya., Braking X-ray radiation during electron beam welding and its relationship with process parameters, Vestn. Sib. Aerokosm. Univ., 2008, no. 3, pp. 117–121.
12. Varushkin, S.V., Control of electron beam surfacing with wire material according to the parameters of braking X-ray radiation, Cand. Sci. (Eng.) Dissertation, Moscow: MEI, 2019.10.15593/2224-9877/2019.4.11 ↗
13. Braverman, V.Ya., Veisver, T.G., and Belozertsev, V.S., Joint tracking during electron beam welding in the atmosphere, Vestn. Sib. Aerokosm. Univ., 2014, no. 1, pp. 142–147.