Modeling Temperature Distributions in Thermal Barrier Coatings with Various Thicknesses
Source abstract
Abstract
The geometric model of thermal barrier coatings (TBCs) was established. Two cases based on the standard thickness of the ceramic layer existed. These were the steps of TBCs thickness were being higher than the standard layer and those of lower than standard layer. The heat transfer processes of these two cases were simulated with the ANSYS software. The change process of thermal effusivity was analyzed in the two cases and the coating thickness differences effect on the surface temperature distributions of TBCs was analyzed through the time course curves of temperature difference. Moreover, the difficulty of detection for these two cases with infrared nondestructive testing was discussed according to maximum temperature difference and the maximum temperature contrast ratio. The result demonstrated that all curves of thermal effusivity with various thickness differences coincided with each other at the initial and longer times, where the ceramic layer thickness was lower than the standard layer. This was more easily detectable compared to the higher thickness and the maximum temperature contrast ratio or the maximum temperature difference increased as the coating thickness difference increased.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Fire dynamics and safety research · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Cinca, N., Lima, C.R.C., and Guilemany, J.M., An overview of intermetallics research and application: status of thermal spray coatings, J. Mater. Res. Technol., 2013, vol. 2, no. 1, pp. 75–86.10.1016/j.jmrt.2013.03.013 ↗
2. Gupta, M., Curry, N., Nylén, P., Markocsan, N., and Vaβen, R., Design of next generation thermal barrier coatings—experiments and modelling, Surf. Coat. Technol., 2013, vol. 220, pp. 20–26.10.1016/j.surfcoat.2012.09.015 ↗
3. Vaßen, R., Jarligo, M.O., Steinke, T., Mack, D E., and Stover, D., Overview on advanced thermal barrier coatings, Surf. Coat. Technol., 2010, vol. 205, no. 4, pp. 938–942.10.1016/j.surfcoat.2010.08.151 ↗
4. Zhang Tianyou, Wu Chao, Xiong Zheng, and Zhou Shenggeng, Research progress in materials and preparation techniques of thermal barrier coatings, Laser Optoelectron. Prog., 2014, vol. 51, no. 3, p. 030004.10.3788/LOP51.030004 ↗
5. Ptaszek, G., Cawley, P., Almond, D., Almond, D., and Pickering, S., Transient thermography testing of unpainted thermal barrier coating (TBC) systems, NDT&E Int., 2013, vol. 59, pp. 48–56.10.1016/j.ndteint.2013.05.001 ↗
6. Bennett, T.D. and Valdes, R., Differential phase of photothermal emission analysis for thermal property measurement of thermal barrier coatings, Surf. Coat. Technol., 2015, vol. 261, pp. 102–107.10.1016/j.surfcoat.2014.11.051 ↗
7. Vavilov, V.P. and Pawar, S.S., A novel approach for one-sided thermal nondestructive testing of composites by using infrared thermography, Polym. Test., 2015, vol. 44, pp. 224–233.10.1016/j.polymertesting.2015.04.013 ↗
8. Li Yanhong, Zhao Yuejin, and Zhang Cunlin., Infrared testing for translucent material coating, Opt. Precis. Eng., 2009, vol. 17, no. 7, pp. 1502–1506.
9. Tu, W., Zhong, S., Shen, Y., and Incecik, A., Nondestructive testing of marine protective coatings using terahertz waves with stationary wavelet transform, Ocean Eng., 2016, vol. 111, pp. 582–592.10.1016/j.oceaneng.2015.11.028 ↗
10. Hua Haoran, Yuan Lihua, Wu Guanhua, and Wu Wei, Defect quantitative detection based on transmission infrared thermal wave method, Infrared Laser Eng., 2016, no. 02, pp. 99–104.
11. Guo Xingwang and Ding Mengmeng, Simulation of thermal NDT of thickness and its unevenness of thermal barrier coatings, Chin. J. Aeronaut., 2010, vol. 31, no. 1, pp. 198–203.
12. Balageas, D.L., Krapez, J.C., and Cielo, P., Pulsed photothermal modeling of layered materials, J. Appl. Phys., 1986, vol. 59, no. 2, pp. 348–357.10.1063/1.336690 ↗
13. Bison, P., Marinetti, S., Grinzato, E., Vavilov, V.P., and Cernuschi, F., Inspecting thermal barrier coatings by IR thermography, Proc. SPIE “Thermosense XXV”, 2003, vol. 5073, pp. 165–173.
14. Krapez, J.C., Thermal effusivity profile characterization from pulse photothermal data, J. Appl. Phys., 2000, vol. 87, no. 9, pp. 4514–4524.10.1063/1.373098 ↗
15. Taketoshi, N., Ozawa, M., Ohta, H., and Baba, T., Thermal effusivity distribution measurements using a thermoreflectance technique, AIP Conf. Proc., 1999, vol. 463, no. 1, pp. 315–317.
16. Shepard, S.M., Favro, L.D., and Thomas, R.L., Thermal wave NDT of ceramic coatings, Proc. SPIE “Thermosense XVII”, 1995, vol. 2473, pp. 190–193.10.1117/12.204854 ↗
17. Vavilov, V.P., Marinetti, S., Cernuschi, F., and Roba, D., Thermal nondestructive testing of thermal-barrier coatings of turbine buckets, Rus. J. Nondestr. Test., 2005, vol. 41, no. 7, pp. 466–472.10.1007/s11181-005-0194-6 ↗
18. Aamodt, L.C., Maclachlan Spicer, J.W., and Murphy, J.C., Analysis of characteristic thermal transit times for time-resolved infrared radiometry studies of multilayered coatings, J. Appl. Phys., 1990, vol. 68, no. 12, pp. 6087–6098.10.1063/1.346897 ↗