Methods and Means for Inspecting the Phase Composition of Two- and Three-Phase Austenitic Steels

1. Gudremon, E., Spetsial’nye stali (Special Steels), Moscow: Metallurgizdat, 1959, vol. 1.

2. Maslenkov, S.B., Zharoprochnye stali i splavy. Spravochnik (Heat-Resistant Steels and Alloys. A Handbook), Moscow: Metallurgiya, 1983.

3. Khimushin, F.F., Nerzhaveyushchie stali (Stainless Steels), Moscow: Metallurgiya, 1967.

4. Gulyaev, A.P., Metallovedenie (Physical Metallurgy), Moscow: Metallurgiya, 1977.

5. Rigmant, M.B., Gorkunov, E.S., Ponomarev, V.S., and Chernova, G.S., FM-3 IFM ferritometer—a gauge for ferrite-phase content, Defektoskopiya, 1996, no. 5, pp. 78–83.

6. Gol'dshtein, M.I., Grachev, S.V., and Veksler, Yu.G., Spetsial’nye stali. Uchebnik dlya VUZov (Special Steels. A Handbooks for Universities), Moscow: MISIS, 1985.

7. Filippov, M.A., Litvinov, V.S., and Nemirovskii, Yu.R., Stali s metastabil’nym austenitom (Steels with Metastable Austenite), Moscow: Metallurgiya, 1988.

8. Kurdyumov, V.G., Utevskii, L.M., and Entin, R.I., Prevrashcheniya v zheleze i stali (Transformations in Iron and Steel), Moscow: Nauka, 1977.

9. Ul'yanin, E.A., Korrozionnostoikie stali i splavy (Corrosion-Proof Steels and Alloys), Moscow: Metallurgiya, 1994.

10. Mezhdunarodnaya inzhenernaya entsiklopediya. Nerazrushayushchie metody kontrolya. Spetsifikator razlichii v natsional’nykh standartakh razlichnykh stran (International Encyclopedia of Engineering. A Declarator of Distinctions in the National Standards of Different Countries), Kershenbaum, V.Ya, Eds., Moscow: Tsentr “Nauka i Tekhnika”, 1995, vol. 3, pp. 68–128.

11. Shcherbinin, V.E. and Gorkunov, E.S., Magnitnyi kontrol' kachestva metallov (Magnetic Inspection of Quality of Metals), Yekaterinburg: Ural Branch, Russ. Acad. Sci., 1996.

12. Bida, G.V., Nichipuruk, A.P., and Tsar’kova, T.P., Magnetic properties of steels after quenching and tempering. III. High-chromium steels, Russ. J. Nondestr. Test., 2001, vol. 37, no. 2, pp. 116–127.10.1023/A:1016771822625 ↗

13. Runov, A.E., Monitoring and correction of the amount of ferrite phase in overlaid and base metals of weld joints of austenitic steel, Svar. Proizvod., 1959, no. 6, pp. 16–17.

14. Belenkova, M.M., Kodlubik, I.I., Mikheev, M.N., Sadovskii, V.D., and Ustyugov, P.A., Effect of deformation martensite on cold brittleness of austenitic steels and their strengthening under plastic deformation, Fiz. Met. Metalloved., 1960, vol. 10, no. 1, pp. 122–130.

15. Entin, S.D., Makarenkova, L.I., Khimchenko, N.V., and Esilevskii, V.P., State of the art and development paths of the magnetic method for quantitative determination of delta-ferrite in the metal of welding joints in the USSR, Svar. Proizvod., 1972, no. 2, pp. 12–15.

16. Khimchenko, N.V. and Bobrov, V.A., in Nerazrushayushchii kontrol' v khimicheskom i neftyanom mashinostroenii (Nondestructive Testing in Chemical and Oil Machine-Building), Moscow: Mashinostroenie, 1978.

17. Belenkova, M.M., Mikheev, M.N., Malyshev, K.A., Sadovskii, V.D., and Ustyugov, P.A., On phase transformations induced by deformation and tempering of austenitic steels, Tr. Inst. Fiz. Met. Akad. Nauk SSSR, 1965, no. 24, pp. 54–58.

18. Nerazrushayushchii kontrol'/Spravochnik v 7 t (Nondestructive Testing. A Handbook in 7 Vols.) Klyuev, V.V, Ed., Moscow: Mashinostroenie, 2004.

19. Apaev, B.A., Fazovyi magnitnyi analiz splavov (Phase Magnetic Analysis of Alloys), Moscow: Metallurgiya, 1976.

20. Mirkin, L.I., Rentgenostrukturnyi kontrol' mashinostroitel’nykh materialov. Spravochnik (X-Ray Diffraction Analysis of Materials for Machine-Building), Moscow: Izd-vo MGU, 1976.

21. Litovchenko, I.Yu., Shevchenko, N.V., Tyumentsev, A.N., and Naiden, E.P., Phase composition and defective substructure of 02Kh17N14M2 austenitic steel after rolling at room temperature, Fiz. Mezomekh., 2006, vol. 9, pp. 137–140.

22. GOST (State Standard) 22838-77. Heat-resistant alloys. Methods for testing and assessing the macrostructure.

23. Utevskii, L.M., Difraktsionnaya elektronnaya mikroskopiya (Diffraction Electron Microscopy), Moscow: Metallurgiya, 1973.

24. Sathirachinda, N., Pettersson, R., and Pan, J., Depletion effects at phase boundaries in 2205 duplex stainless steel characterized with SKPFM and TEM/EDS, Corros. Sci., 2009, vol. 51, pp. 1850–1860.10.1016/j.corsci.2009.05.012 ↗

25. Mironov, V.L., Osnovy skaniruyushchei zondovoi mikroskopii/Uchebnoe posobie dlya studentov starshikh kursov vysshikh uchebnykh zavedenii (Basics of Scanning Probe Microscopy. A Handbook for Students in Higher Training of Universities), Nizhny Novgorod: Inst. Phys. Microstruct., Russ. Acad. Sci., 2004.

26. Schwartz, A. and Wiesendanger, R., Magnetic sensitive force microscopy, Nanotoday, 2008, vol. 2, nos. 1-2, pp. 28–39.10.1016/S1748-0132(08)70013-6 ↗

27. Gheno, S.M., Santos, F.S., and Kuri, S.E., Probing the duplex stainless steel phases via magnetic force microscopy, J. Appl. Phys., 2008, p. 053906.

28. Guo, L.Q., Shi, M.Li., Yan, Y., Li, X.Y., and Qiao, L.J., Effect of annealing temperature on the corrosion behavior of duplex stainless steel studied by in situ techniques, Corros. Sci., 2011, vol. 53, no. 11, pp. 3733–3741.10.1016/j.corsci.2011.07.019 ↗

29. Kishore, G.V.K., Kumar, A., Chakraborty, G., Albert, S.K., et al., Study of magnetism in Ni-Cr hardface alloy deposit on 316LN stainless steel using magnetic force microscopy, J. Magn. Magn. Mater., 2015, vol. 385 pp. 112–118.10.1016/j.jmmm.2015.03.002 ↗

30. Choi, J.Y., Ji, J.H., Hwang, S.W., and Park, K.T., Low-cycle fatigue-induced martensitic transformation in SAF 2205 duplex stainless steel, Mater. Sci. Eng., A 528, 2011, pp. 6012–6019.10.1016/j.msea.2011.04.038 ↗

31. Femenia, M., Canalias, C., Pana, J., and Leygraf, C., Scanning kelvin probe force microscopy and magnetic force microscopy for characterization of duplex stainless steels, J. Electrochem. Soc., 2003, vol. 150, no. 6, pp. B274–B281.10.1149/1.1572482 ↗

32. Jacobs, H.O., Leuchtmann, P., Homan, O.J., and Stemmer, A., Resolution and contrast in Kelvin probe force microscopy, J. Appl. Phys., 1998, vol. 84, no. 3, pp. 1168–1173.10.1063/1.368181 ↗

33. Nonnenmacher, M., O’boyle, M.P., and Wickramasinghe, H.K., Kelvin probe force microscopy, Appl. Phys. Lett., 1991, vol. 58, no. (25), pp. 2921–2923.10.1063/1.105227 ↗

34. Schmutz, P. and Frankel, G.S., Characterization of aa2024 t3 by scanning kelvin probe force microscopy, J. Electrochem. Soc., 1998, vol. 145, no. 7, pp. 2285–2295.10.1149/1.1838633 ↗

35. Melitz, W., Shen, J., Kummel, A.C., and Lee, S., Kelvin probe force microscopy and its application, Surf. Sci. Rep., 2011, vol. 66, pp. 1–27.10.1016/j.surfrep.2010.10.001 ↗

36. Örnek, C. and Engelberg, D.L., SKPFM measured Volta potential correlated with strain localisation in microstructure to understand corrosion susceptibility of cold-rolled grade 2205 duplex stainless steel, Corros. Sci., 2015, vol. 99, pp. 164–171.10.1016/j.corsci.2015.06.035 ↗

37. Danilenko, V.N., Mironov, S.Yu., Belyakov, A.N., and Zhilyaev, A.P., Applying EBSD-analysis in physical metallurgy, Zavod. Lab., Diagn. Mater., 2012, vol. 78, no. 3, pp. 28–46.

38. Entin, R.I., Prevrashcheniya austenita v stali (Austenite Transformations in Steel), Moscow: Gos. Nauch.-Tekh. Izd-vo Lit. Chernoi Tsvetnoi Met., 1960.

39. Bida, G.V. and Nichipuruk, A.P., Magnitnye svoistva termoobrabotannykh stalei (Magnetic Properties of Thermally Treated Steels), Yekaterinburg: Ural Branch, Russ. Acad. Sci., 2005.

40. Gorkunov, E.S., Zadvorkin, S.M., Goruleva, L.S., and Bukhvalov, A.B., On the efficiency of application of magnetic and electrical parameters for nondestructive testing of crystal-lattice microdistortions in heat-treated carbon steels, Russ. J. Nondestr. Test., 2012, vol. 48, no. 3, pp. 166–175.10.1134/S1061830912010056 ↗

41. Kuznetsov, I.A. and Okunev, V.M., Thermoelectrical properties of steels and a device for evaluating chemical and phase composition, Defektoskopiya, 1993, no. 8, pp. 78–84.

42. Gorkunov, E.S., Somova, V.M., Tsar’kova, T.P., and Kuznetsov, I.A., Express testing of chemical and phase composition of steels by thermoelectrical method, Defektoskopiya, 1998, no. 3, pp. 3–16.

43. Mikheev, M.N., Belenkova, M.M., Vitkalova, R.N., Kogan, L.Kh., and Anoprienko, S.S., Electromagnetic method for determining deformation martensite in stainless steels, Defektoskopiya, 1985, no. 10, pp. 48–51.

44. Gerasimov, V.G., Pokrovskii, A.D., and Sukhorukov, V.V., Nerazrushayushchii kontrol'. Kn. 3. Elektromagnitnyi kontrol' (Nondestructive Testing. Book 3: Electromagnetic Testing), Moscow: Vysshaya Shkola, 1992.

45. Dorofeev, A.L., Application of electromagnetic method of testing the quality of articles in machine building, Defektoskopiya, 1979, no. 3, pp. 5–19.

46. Sandovskii, V.A., Uvarov, A.I., Vasechkina, T.P., and Anufrieva, E.I., A study of cellular decay in austenite alloys using an applied eddy-current transducer, Russ. J. Nondestr. Test., 2001, vol. 37, no. 2, pp. 128–135.10.1023/A:1016723906696 ↗

47. Sandovskii, V.A., Uvarov, A.I., and Vasechkina, T.P., Effect of structure of aging metastable austenitic steels on the signal from an eddy-current transducer, Russ. J. Nondestr. Test., 2000, vol. 36, no. 11, pp. 815–825.10.1007/BF02759294 ↗

48. Aßmus, K. and Hübner, W., Methods for investigating austenite stability during tribological stressing of FeCrNi alloys, in DGZfP-Proceedings BB 90-CD Poster 17 EWGAE, 2004, p. 855.

49. Moore P.O., Miller R.K., Hill R.K., Eds., Nondestructive Testing Handbook. Acoustic Emission Testing, Am. Soc. Nondestr. Test., 2005, vol. 6, pp. 31–78, 3th Ed.

50. Vedenev, M.A., Ponomarev, V.S., Kuleev, V.G., Rigmant, M.B., Kolomeets, N.P., Chernova, G.S., Lavrent’ev, A.G., and Tret’yakov, I.V., F-01 ferritometer—a device for testing changes in the magnetic state of sheets of submagnetic austenitic steels, Defektoskopiya, 1994, no. 3, pp. 3–9.

51. Merinov, P.E. and Mazepa, A.G., Determining deformation martensite in steels of austenitic class by magnetic method, Zavod. Lab., 1997, no. 3, pp. 47–49.

52. Deryagin, A.I., Zavalishin, V.A., Sagaradze, V.V., and Efros, B.M., Formation of nanosized ferromagnetic phases during plastic deformation and subsequent annealing of stable austenitic steels, Russ. J. Nondestr. Test., 2007, vol. 43, no. 7, pp. 427–435.10.1134/S1061830907070029 ↗

53. Deryagin, A.I., Zavalishin, V.A., Sagaradze, V.V., Kuleev, V.G., Rigmant, M.B., and Krepyshev, V.N., Effect of external actions on the magnetic properties and structure of 45G17YuZ austenitic steel. I. Deformation action, Fiz. Met. Metalloved., 1992, no. 11, pp. 124–130.

54. Belenkova, M.M. and Mikheev, M.N., On magnetic method for determining the continuity of austenitic steel under intercrystallite corrosion, Defektoskopiya, 1967, no. 5, pp. 65–75.

55. International Standard ISO 8249-1985. Welding. Determination of ferrite number in austenitic weld metal deposited by covered Cr-Ni steel electrodes.

56. American National Standard ANSI/AWS A4.2-86 Standard procedure for calibrating magnetic instruments to measure the delta-ferrite content of austenitic stainless-steel weld metal.

57. Chechernikov, V.I., Magnitnye izmereniya (Magnetic Measurements), Moscow: Izd-vo MGU, 1969.

58. Yanus, R.I., Magnitnaya defektoskopiya (Magnetic Nondestructive Testing), Moscow: OGIZ Gostekhizdat, 1946.

59. Rigmant, M.B., Gladkovskii, S.V., Gorkunov, E.S., Matafonov, P.P., and Smirnov, S.V., On the possibility of magnetic nondestructive testing of elastoplastic deformation in steels with metastable austenite, Kontrol’. Diagn., 2000, no. 9 (27), pp. 62–63.

60. GOST (State Standard) 26364-90. Ferritometers for steels of austenitic class. General technical conditions, Moscow: Izd-vo Standartov, 1985.

61. GOST (State Standard) 8.518-84. State system of measurement unification. Ferritometers for steels of austenitic class. Verification procedure.

62. GOST (State Standard) 11878. Austenitic steel. Method for measuring the content of alpha-phase.

63. Merinov, P.E., Kareeva, M.A., and Grigor’ev, B.P., Magnetic-saturation method for certifying reference samples of the content of ferrite phase in steels of austenitic–ferritic class, Tr. TsNIITMASh, 1989, no. 215, pp. 72–76.

64. American National Standard ANSI/AWS A4.2-86 Standard procedure for calibrating magnetic instruments to measure the delta-ferrite content of austenitic stainless-steel weld metal.

65. Merinov, P., Entin, S., Beketov, B., and Runov, A., The magnetic testing of the ferrite content of austenitic stainless-steel weld metal, NDT Int., 1978, vol. 11, no. 1, pp. 9–14.10.1016/0308-9126(78)90003-2 ↗

66. Bungardt, K., Dietrich, H., and Arntz, H., Magnetic determination of ferrite in austenitic materials, especially in austenitic weldments, DEW Techniche Berichte, 1970, vol. 10, no. 4.

67. Bozorth, R.M., Ferromagnetism, Wiley-IEEE Press, 1993.

68. Elmer, J. and Eagar, T., Measuring the residual ferrite content of rapidly solidified stainless steel alloy, Weld. Res. Suppl., 1990, no. 4, pp. 141–150.

69. Elmer, J. and Eagar, T., Determination of Residual Ferrite in Stainless Steel Alloys Using a Vibrating Sample Magnetometer, IIW Doc, pp. 11–C832.

70. Stalmasek, E., Measurements of ferrite content in austenitic stainless steel weld metal giving internationally reproducible results, Weld. Res. Counc. Bull., 1986, no. 318, pp. 22–97.

71. Pudov, V.I., Rigmant, M.B., and Gorkunov, B.C., RF Patent No. 2166191, A technique for measuring ferromagnetic phase in austenitic steels, Byull. Izobret., No. 5.

72. Rigmant, M.B., Nichipuruk, A.P., Khudyakov, B.A., Ponomarev, V.S., Tereshchenko, N.A., and Korkh, M.K., Instruments for magnetic phase analysis of articles made of austenitic corrosion-resistant steels, Russ. J. Nondestr. Test., 2005, vol. 41, no. 11, pp. 701–709.10.1007/s11181-006-0021-8 ↗

73. Rigmant, M.B., Nichipuruk, A.P., and Korkh, M.K., The possibility of separate measurements of the amounts of ferrite and deformation martensite in three-phase austenitic-class steels using the magnetic method, Russ. J. Nondestr. Test., 2012, vol. 48, no. 9, pp. 511–521.10.1134/S1061830912090069 ↗

74. Korkh, M.K., Rigmant, M.B., Davydov, D.I., Shishkin, D.A., Nichipuruk, A.P., and Korkh, Yu.V., Determination of the phase composition of three-phase chromium–nickel steels from their magnetic properties, Russ. J. Nondestr. Test., 2015, vol. 51, no. 12, pp. 727–737.10.1134/S1061830915120049 ↗