Study of fracture of specimens made of fiberglass plastic using acoustic-emission and strain measurements
Source abstract
Abstract
The crack resistance of specimens made of a fiberglass plastic composite material has been studied. All specimens had approximately the same geometric dimensions. At the center of the specimens, there were 25-mm-long notches on both sides. The specimens were loaded with a static or cyclic load at a frequency f = 5 Hz. The tests were performed using acoustic-emission (AE) and strain gage measurements. The AE technique allowed stable localization of a flaw at an early stage of growth and made it possible to automate the measurement process. The strain gage measuring system was used to find deformations in the zones of localization of AE signals.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Thermography and Photoacoustic Techniques · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (3)
Show source-provided references
1. Stepanova, L. N., Lebedev, E. Yu., Kareev, A. E., et al., Use the Acoustic Emission Method in Detecting the Fracture Process of Specimens Made of Composite Materials, Defektoskopiya, 2004, no. 7, pp. 34–41 [Rus. J. Nondestruct. Test. (Engl. Transl.), 2004, vol. 40, no. 7, pp. 455–461].10.1007/s11181-005-0072-2 ↗
2. Stepanova, L. N., Chaplygin, V. N., Lebedev, E. Yu., et al., Use of the Acoustic Emission during Cyclic Testing of Composite Elements of Aircrafts, Kontrol’. Diagnostika, 2004, no. 12, pp. 53–56.
3. Ser’eznov, A. N., Stepanova, L. N., Murav’ev, V. V., et al., Diagnostika ob’ektov transporta metodom akusticheskoi emissii (Diagnostics of Transport Objects by Acoustic-Emission Technique, Stepanova, L. N., Murav’ev, V. V, Eds., Moscow: Mashinostroenie, 2004.