Research on Scanning Path of Automatic Phased Array Ultrasonic Testing of Pipe Welds with Complex Geometry
Source abstract
Abstract
The automatic phased array ultrasonic testing method has been developed for inspecting the pipe welds with complex geometry. Applying time of flight diffraction (TOFD) technique has two problems: one is the difficulty in recognition of head wave under complex structure; the other is the limited scanning space cannot provide the needed span for pitch-catch mode. To overcome these two problems, an array probe can be placed on the surface of base metal of the weld by the direct and double traverse techniques. In order to design the optimal scanning path for high probability of detection and inspection rate, the model of beam path on tilt steps was established to quantitatively analyze the effects of tilt steps on beam coverage and mode conversion. Experiments were conducted to validate the proposed rule of planning the optimal scanning path. All artificial defects in the mock-up block were detected on the scanning side of which exists the optimal scanning path. While for the scanning side without the optimal scanning path, a combination of scanning is needed to avoid missing inspection.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Non-Destructive Testing Techniques · Geophysical Methods and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. DL/T869 2015. Standard request of thermal power plant welds te chnique regulations, 2015.
2. Meng, Q.W., Wang, Q.L., and Zhu, L.Q., Fracture failure analysis on head of high pressure steam pipe, Pressure Vessels, 2013, vol. 30, no. 11, pp. 52–55.
3. Manjula, K., Vijayarekha, K., Venkatraman, B., and Karthik, D., Ultrasonic time of flight diffraction technique for weld defects: a review, Res. J. Appl. Sci., Eng. Technol., 2012, vol. 4, no. 24, pp. 5525–5533.
4. Ferrand, A., Darmon, M., Chatillon, S., and Deschamps, M., Modeling of ray paths of head waves on irregular interfaces in TOFD inspection for NDE, Ultrasonics, 2013, vol. 54, no. 7, pp. 1851–1860.10.1016/j.ultras.2013.12.007 ↗
5. Drinkwater, B.W. and Wilcox, P.D., Ultrasonic arrays for non-destructive evaluation: a review, NDT & E Int., 2006, vol. 39, no. 7, pp. 525–541.10.1016/j.ndteint.2006.03.006 ↗
6. Cawley, P., Non-destructive testing current capabilities and future directions, Proc. Inst. Mech. Eng., Part L: J. Mater.: Des. Appl., 2001, vol. 215, no. 4, pp. 213–223.
7. Yang, S., Yoon, B., and Kim, Y., Using the phased array ultrasonic technique for the inspection of straddle mount type low pressure turbine discs, NDT & E Int., 2009, vol. 42, no. 2, pp. 128–132.10.1016/j.ndteint.2008.10.004 ↗
8. Zhang, J., Li, X.H., Shi, Y.K., and Liang, L.S., Phased array ultrasonic inspection of embedded defects in hydropower turbine runner welds, Insight, 2014, vol. 56, no. 7, pp. 390–394.10.1784/insi.2014.56.7.390 ↗
9. Miki, M. and Ogata, M., Phased array ultrasonic testing methods for welds in bogie frames of railway vehicles, Insight, 2015, vol. 57, no. 7, pp. 382–388.10.1784/insi.2015.57.7.382 ↗
10. Lu, M.H., Cheng, J., and Zhang, Y., Computer aided technology of ultrasonic phased array inspection for T weld, Aerosp. Mater. & Technol., 2012, vol. 1, no. 1, pp. 38–41.