A study of specimens from solebar material with boxlike cross sections using the acoustic-emission method
Source abstract
Abstract
The results are presented of the investigation of fatigue crack growth in 200 × 100 × 10 mm specimens made from the upper chord of rejected solebars with boxlike cross sections. The specimens were placed in an MTS-50 electrohydraulic machine and alternately loaded with cyclic and static loads from the instant of fatigue-crack nucleation until specimen damage occurred. The data on nucleation and the development of fatigue cracks in the specimens were recorded using the method of acoustic-emission (AE) strain measurements. A piezo antenna consisting of four acoustic emission transducers (AET) was mounted on each specimen. Four wire strain sensors were glued near the saw cut that served as a stress concentrator. After specimen damage, chemical analysis of the material was performed and nonmetallic inclusions and the degree of impurity were evaluated. Micro- and macrofractographic analyses, which allowed determination of the character of damage, were performed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Properties and Failure Mechanisms · Engineering Diagnostics and Reliability · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Kon’kova, T.E., Belovodskii, A.B., and Velikanov, A.V., The ways to increase operational reliability of steel cast items of freight car trucks, Vestn. VNIIZhT, 2009, no. 1, pp. 22–26.
2. Nerazrushayushchii kontrol’. Spravochnik: V 8 t. (Nondestructuve Testing: Reference Book), Klyuev, V.V., Ed., Moscow: Mashinostroenie, 2006.
3. Ser’eznov, A.N., Stepanova, L.N., Ivliev, V.V., et al., Akustiko-emissionnyi kontrol’ zheleznodorozhnykh konstruktsii (Acoustic Emission Testing of Railway Structures), Novosibirsk: Nauka, 2011.
4. Grassman, S.A., Bol’chanov, A.A., Stepanova, L.N., et al., Acoustic-emission testing of solebars of the freight car truck, Zheleznodorozhn. Transp., 2011, no. 12, pp. 45–47.
5. Stepanova, L.N., Grassman, S.A., Kabanov, S.I., et al., Acoustic-emission testing of solebars with boxlike cross sections, Russ. J. Nondestr. Test., 2011, vol. 47, no. 3, pp. 158–163.10.1134/S1061830911030090 ↗
6. OST (Branch Standard) 32-183-2001: Two-axis trucks of freight cars. For railways with 1520 mm tracks, 2001.
7. TTTsV (Technical Requirements of Wagon Management Department) 32-695-2006: Cast items from low-alloyed steel. For wagons of railways with 1520 mm tracks, 2006.
8. GOST (State Standard) 1778-70: Steel. Metallographic methods for identification of nonmetallic inclusions, 1970.
9. GOST (State Standard) 5639-82: Steels and alloys. Methods for identification and determination of the grain size, 1982.