A Method for Evaluating Failure in Reinforced Concrete under Bending Based on the Response of Electrical Parameters to an Impact Action
Source abstract
Abstract
The regularities of changes in the properties of the electrical response of reinforced concrete to an impact action in a four-point bending flexural test and the influence of the rebar cage configuration on the processes of failure in reinforced beams and on electrical response parameters have been studied. Criteria have been proposed for determining the stages of failure in reinforced concrete beams, based on electrical response parameters. The nucleation and growth of macrocracks in the tensile zones of reinforced beams is accompanied by a drop in the maximum cross-correlation coefficient of signal spectra at the current and previous loading levels to 0.45–0.6. An increase in the energy attenuation coefficient of electrical responses in a reinforced beam by 1.5–2.5 times can serve as a precursor to its impending catastrophic breakdown.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Structural Response to Dynamic Loads · Concrete Corrosion and Durability · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Pendhari, S.S., Kant, T., and Desai, Y.M., Application of polymer composites in civil construction: a general review, Compos. Struct., 2008, vol. 84, no. 2, pp. 114–124.10.1016/j.compstruct.2007.06.007 ↗
2. Aggelis, D.G., Mpalaskas, A.C., and Matikas, T.E., Investigation of different fracture modes in cement-based materials by acoustic emission, Cem. Concr. Res., 2013, vol. 48, pp. 1–8.10.1016/j.cemconres.2013.02.002 ↗
3. Carpinteri, A., Lacidogna, G., Accornero, F., Mpalaskas, A.C., Matikas, T.E., and Aggelis, D.G., Influence of damage in the acoustic emission parameters, Cem. Concr. Res., 2013, vol. 44, pp. 9–16.10.1016/j.cemconcomp.2013.08.001 ↗
4. Kyriazopoulos, A., Anastasiadis, C., Triantis, D., and Brown, C.J., Non-destructive evaluation of cementbased materials from pressure-stimulated electrical emission–preliminary results, Constr. Build. Mater., 2011, vol. 25, no. 4, pp. 1980–1990.10.1016/j.conbuildmat.2010.11.053 ↗
5. Alam, S.Y. and Loukili, A., Transition from energy dissipation to crack openings during continuum–discontinuum fracture of concrete, Int. J. Fract., 2017, vol. 206, no. 1, pp. 49–66.10.1007/s10704-017-0200-8 ↗
6. Gade, S.O., Alaca, B.B., and Sause, M.G.R., Determination of crack surface orientation in carbon fibre reinforced polymers by measuring electromagnetic emission, J. Nondestr. Eval., 2017, vol. 36, p. 21.10.1007/s10921-017-0403-y ↗
7. Krzemień, K. and Hager, I., Post-fire assessment of mechanical properties of concrete with the use of the impact-echo method, Constr. Build. Mater., 2015, vol. 96, pp. 155–163.10.1016/j.conbuildmat.2015.08.007 ↗
8. Liu, P.-L. and Yeh, P.-L., Spectral tomography of concrete structures based on impact echo depth spectra, NDT & E Int., 2011, vol. 44, no. 8, pp. 692–702.10.1016/j.ndteint.2010.09.013 ↗
9. Hsiao, C., Cheng, C.-C., Liou, T., and Juang, Y., Detecting flaws in concrete blocks using the impact-echo method, NDT & E Int., 2008, vol. 41, pp. 98–107.10.1016/j.ndteint.2007.08.008 ↗
10. Lin, Y. and Sansalone, M., Transient response of thick circular and square subjected to transverse elastic impact, J. Acoust. Soc. Am., 1992, vol. 91, no. 2, pp. 885–893.10.1121/1.402494 ↗
11. Tsai, Y.-T. and Zhu, J., Simulation and experiments of airborne zero-group-velocity lamb waves in concrete plate, J. Nondestr. Eval., 2012, vol. 31, no. 4, pp. 373–382.10.1007/s10921-012-0148-6 ↗
12. Algernon, D., Gräfe, B., Mielentz, F., Köhler, B., and Schubert, F., Imaging of the elastic wave propagation in concrete using scanning techniques: application for impact-echo and ultrasonic echo methods, J. Nondestr. Eval., 2008, vol. 27, no. 1, pp. 83–97.10.1007/s10921-008-0034-4 ↗
13. Quiviger, A., Payan, C., Chaix, J.-F., Garnier, V., and Salin, J., Effect of the presence and size of a real macrocrack on diffuse ultrasound in concrete, NDT & E Int., 2012, vol. 45, pp. 128–132.10.1016/j.ndteint.2011.09.010 ↗
14. Song, H. and Popovics, J.S., Characterization of steel-concrete interface bonding conditions using attenuation characteristics of guided waves, Cem. Concr. Compos., 2017, vol. 83, pp. 111–124.10.1016/j.cemconcomp.2017.07.001 ↗
15. In, C.-W., Schempp, F., Kim, J.-Y., and Jacobs, L.J., A fully non-contact, air-coupled ultrasonic measurement of surface breaking cracks in concrete, J. Nondestr. Eval., 2015, vol. 34, p. 272.10.1007/s10921-014-0272-6 ↗
16. Brozovsky, J., Ultrasonic pulse and resonance method–evaluation of the degree of damage to the internal structure of repair mortars caused by exposure to high temperatures, Russ. J. Nondestr. Test., 2017, vol. 53, no. 10, pp. 744–753.10.1134/S1061830917100047 ↗
17. Genovés, V., Gosálbez, J., Carrión, A., Miralles, R., and Payá, J., Ultrasonic broadband signals monitoring of glass-fiber reinforced cement (GRC) bending tests, Cem. Concr. Compos., 2017, vol. 80, pp. 55–63.10.1016/j.cemconcomp.2017.02.009 ↗
18. Smyl, D., Rashetnia, R., Seppänen, A., and Pour-Ghaz, M., Can electrical resistance tomography be used for imaging unsaturated moisture flow in cement-based materials with discrete cracks, Cem. Concr. Res., 2017, vol. 91, pp. 61–72.10.1016/j.cemconres.2016.10.009 ↗
19. Fengqi, G., Zhiwu, Y., Peng, L., and Zhi, D., Practical issues related to application of electromechanical impedance-based method in concrete structural health monitoring, Res. Nondestr. Eval., 2015, vol. 27, pp. 26–33.
20. Fursa, T.V., Dann, D.D., and Petrov, M.V., Evaluation of freeze-thaw damage to reinforced concrete based on the parameters of electric response to mechanical impact, Constr. Build. Mater., 2017, vol. 155, pp. 451–462.10.1016/j.conbuildmat.2017.08.099 ↗
21. Fursa, T.V., Dann, D.D., Petrov, M.V., and Lykov, A.E., Evaluation of damage in concrete under uniaxial compression by measuring electric response to mechanical impact, J. Nondestr. Eval., 2017, vol. 36, p. 30.10.1007/s10921-017-0411-y ↗
22. Fursa, T.V., Petrov, M.V., Dann, D.D., and Lykov, A.E., Developing an integrated technique to evaluate crack formation in reinforced concrete under uniaxial compression, Russ. J. Nondestr. Test., 2017, vol. 53, no. 6, pp. 457–463.10.1134/S1061830917060079 ↗
23. Surzhikov, V.P., Fedotov, P.I., and Khorsov, N.N., Determination of the criteria of controlling the state of stress in composite materials during steplike loading, Tech. Phys., 2015, vol. 60, no. 3, p. 385–388.10.1134/S1063784215030263 ↗