Influence of Destabilizing Factors on Results of Thermoelectric Testing
Source abstract
Abstract
The results of studying the effect of the transient resistance of contacts on the result of differential thermoelectric testing are presented. The principle of the differential testing method with two hot electrodes and one heating system, as well as the design of such a sensor is demonstrated. The rationale for the formation of a multipoint contact and an equivalent sensor circuit corresponding to the multipoint contact are given. The influence of contact resistance on the testing result is investigated both on the model and experimentally.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Thermography and Photoacoustic Techniques · Advanced Thermoelectric Materials and Devices · Advanced Sensor Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Carreon, H., Thermoelectric detection of spherical tin inclusions in copper by magnetic sensing, J. Appl. Phys., 2000, vol. 88, no. 11, p. 6495. https://doi.org/10.1063/1.132259110.1063/1.1322591 ↗
2. Carreon, H., Thermoelectric nondestructive evaluation of residual stress in shot-peened metals, Res. Nondestr. Eval., 2002, vol. 14, no. 2, p. 59. https://doi.org/10.1080/0934984020940970510.1080/09349840209409705 ↗
3. Nagy, P.B., Non-destructive methods for materials’ state awareness monitoring, Insight Nondestr. Test. Cond. Monit., 2010, vol. 52, no. 2, p. 61. https://doi.org/10.1784/insi.2010.52.2.6110.1784/insi.2010.52.2.61 ↗
4. Soldatov, A.A., Seleznev, A.I., Fiks, I.I., Soldatov, A.I., and Kröning, Kh.M., Nondestructive proximate testing of plastic deformations by differential thermal EMF measurements, Russ. J. Nondestr. Test., 2012, vol. 48, no. 3, pp. 184–186. https://doi.org/10.1134/S106183091502008410.1134/S1061830915020084 ↗
5. Li, J.F., Liu, W.S., Zhao, L.D., and Zhou, M., High-performance nanostructured thermoelectric materials, NPG Asia Mater., 2010, vol. 2, no. 4, p. 152. https://doi.org/10.1038/asiamat.2010.13810.1038/asiamat.2010.138 ↗
6. Kikuchi, M., Dental alloy sorting by the thermoelectric method, Eur. J. Dent., 2010, vol. 4, no. 1, pp. 66–70.10.1055/s-0039-1697810 ↗
7. Cooper, R.F., Sorting mixed metals by the thermoelectric effect, Phys. Educ., 1976, vol. 11, no. 4, pp. 290–292. https://doi.org/10.1088/0031-9120/11/4/00410.1088/0031-9120/11/4/004 ↗
8. Stuart, C.M., The Seebeck effect as used for the nondestructive evaluation of metals, Int. Adv. Nondestr. Test., 1983, vol. 9.
9. Stuart, C., Thermoelectric differences used for metal sorting, J. Test. Eval., 1987, vol. 15, no. 4, pp. 224–230. https://doi.org/10.1520/JTE11013J10.1520/JTE11013J ↗
10. Dragunov, V.K. and Goncharov, A.L., New approaches to the rational manufacturing of combined constructions by EBW, IOP Conf. Ser. Mater. Sci. Eng., 2019, vol. 681, p. 012010. https://doi.org/10.1088/1757-899X/681/1/01201010.1088/1757-899X/681/1/012010 ↗
11. Goncharov, A., Sliva, A., Kharitonov, I., Chulkova, A., and Terentyev, E., Research of thermoelectric effects and their influence on electron beam in the process of welding of dissimilar steels, IOP Conf. Ser. Mater. Sci. Eng., 2020, vol. 759, no. 1, p. 012008. https://doi.org/10.1088/1757-899X/759/1/01200810.1088/1757-899X/759/1/012008 ↗
12. Kharitonov, I.A., Rodyakina, R.V., and Goncharov, A.L., Investigation of magnetic properties of various structural classes steels in weak magnetic fields characteristic for generation of thermoelectric currents in electron beam welding, Solid State Phenom., 2020, vol. 299, pp. 1201–1207.10.4028/www.scientific.net/SSP.299.1201 ↗
13. Soldatov, A.I., Soldatov, A.A., Kostina, M.A., and Kozhemyak, O.A., Experimental studies of thermoelectric characteristics of plastically deformed steels ST3, 08KP and 12H18N10T, Key Eng. Mater., 2016, vol. 685, pp. 310–314.10.4028/www.scientific.net/KEM.685.310 ↗
14. Soldatov, A.I., Soldatov, A.A., Sorokin, P.V., Abouellail, A.A., Obach, I.I., Bortalevich, V.Y., Shinyakov, Y.A., and Sukhorukov, M.P., An experimental setup for studying electric characteristics of thermocouples, Proc. SIBCON 2017 (Astana, 2017), p. 79985342017.10.1109/SIBCON.2017.7998534 ↗
15. Fulton, J.P., Wincheski, B., and Namkung, M., Automated weld characterization using the thermoelectric method, Mater. Sci., 1993, p. 262902.
16. Carreon, H. and Medina, A., Nondestructive characterization of the level of plastic deformation by thermoelectric power measurements in cold-rolled Ti–6Al–4V samples, Mater. Sci. Nondestr. Test. Eval., 2007, vol. 22, no. 4. https://doi.org/10.1080/1058975070154696010.1080/10589750701546960 ↗
17. Carreon, H., Detection of fretting damage in aerospace materials by thermoelectric means, Smart Struct. Eng. Phys. (San Diego, 2013), p. 86940Z. https://doi.org/10.1117/12.200944810.1117/12.2009448 ↗
18. Lakshminarayan, B., Carreon, H., and Nagy, P., Monitoring of the level of residual stress in surface treated specimens by a noncontacting thermoelectric technique, AIP Conf. Ser., 2003, vol. 657, no. 1. https://doi.org/10.1063/1.157031110.1063/1.1570311 ↗
19. Carreon, H., Evaluation of thermoelectric methods for the detection of fretting damage in 7075-T6 and Ti–6Al–4V alloys, Mater. Sci., 2015, vol. 2, pp. 435–442. https://doi.org/10.1007/978-3-319-48191-3_5310.1007/978-3-319-48191-3_53 ↗
20. Carreon, H., Barriuso, S., Barrera, G., González-Carrasco, J.L., and Caballero, F., Assessment of blasting induced effects on medical 316 LVM stainless steel by contacting and non-contacting thermoelectric power techniques, Mater. Sci., 2012, vol. 206, nos. 11–12, pp. 2941–2946. https://doi.org/10.1016/J.SURFCOAT.2011.12.02610.1016/J.SURFCOAT.2011.12.026 ↗
21. Hu, J. and Nagy, P.B., On the thermoelectric effect of interface imperfections, Rev. Prog. Quant. Nondestr. Eval., 1999, vol. 188, pp. 1487–1494. https://doi.org/10.1007/978-1-4615-4791-4_19110.1007/978-1-4615-4791-4_191 ↗
22. Goncharov, A.L., Investigation of the thermal electromotive force of steels and alloys of different structural grades in electron beam welding, Weld. Int., 2011, vol. 25, no. 9, pp. 703–709.10.1080/09507116.2011.566744 ↗
23. Goncharov, A.L., Chulkova, A.V., Rodyakina, R.V., Dragunov, V.K., and Chulkov, I.S., Investigation of thermo-EMF temperature dependences for construction materials of various structural classes, IOP Conf. Ser. Mater. Sci. Eng., 2019, vol. 681, p. 012017. https://doi.org/10.1088/1757-899X/681/1/01201710.1088/1757-899X/681/1/012017 ↗
24. Li, J.F., Liu, W.S., Zhao, L.D., and Zhou, M., High-performance nanostructured thermoelectric materials, NPG Asia Mater., 2010, vol. 2, pp. 152–158.10.1038/asiamat.2010.138 ↗
25. Ritzer, T.M., Lau, P.G., and Bogard, A.D., A critical evaluation of today’s thermoelectric modules, Thermoelectrics, 1997, pp. 619–623. https://doi.org/10.1109/ICT.1997.66760610.1109/ICT.1997.667606 ↗
26. Buist, R.J., A new method for testing thermoelectric materials and devices, 11-th Int. Conf. Thermoelectr. (Arlington, 1992).
27. Ciylan Bünyamin and Yılmaz Sezayi, Design of a thermoelectric module test system using a novel test method, Int. J. Therm. Sci., 2007, vol. 46, no. 7, pp. 717–725. https://doi.org/10.1016/j.ijthermalsci.2006.10.00810.1016/j.ijthermalsci.2006.10.008 ↗
28. Soldatov, A.I., Soldatov, A.A., Sorokin, P.V., Loginov, E.L., Abouellail, A.A., Kozhemyak, O.A., and Bortalevich, S.I., Control system for device “thermotest,” 2016 Int. Sib. Conf. Control Commun. (SIBCON) (Moscow, 2016), p. 7491869. https://doi.org/10.1109/SIBCON.2016.749186910.1109/SIBCON.2016.7491869 ↗
29. Soldatov, A.A., Dement’ev, A.A., Soldatov, A.I., and Vasil’ev, I.M., Control of quality of applying heat- conducting compound, Russ. J. Nondestr. Test., 2020, vol. 56, no. 3, pp. 284–290.10.1134/S1061830920030110 ↗
30. Carreon Héctor, Thermoelectric detection of fretting damage in aerospace materials, Russ. J. Nondestr. Test., 2014, vol. 50, no. 11, pp. 684–692.10.1134/S1061830914110102 ↗
31. Abouellail, A.A., Soldatov, A.A., Sorokin, P.V., Soldatov, A.I., and Khan, V., Investigation of the characteristics of thermoelectric EMF sources, Defektoskopiya, 2018, no. 7, pp. 54–60.
32. Xuan, X.C., Ng, K.C., Yap, C., and Chua, H.T., A general model for studying effects of interface layers on thermoelectric devices performance, Int. J. Heat Mass Transfer, 2002, vol. 45, no. 26, pp. 5159–5170. https://doi.org/10.1016/S0017-9310(02)00217-X10.1016/S0017-9310(02)00217-X ↗
33. Hu, J. and Nagy, P.B., On the role of interface imperfections in thermoelectric nondestructive materials characterization, Appl. Phys. Lett., 1998, vol. 7, no. 4, p. 467. https://doi.org/10.1063/1.12190210.1063/1.121902 ↗
34. Sungtaek, Ju Y., Study of interface effects in thermoelectric microrefrigerators, J. Appl. Phys., 2000, vol. 88, no. 7, pp. 4135–4139. https://doi.org/10.1063/1.128977610.1063/1.1289776 ↗
35. Denisov, V.V., Soldatov, A.I., and Tsekhanovsky, S.A., The principle of measuring differential thermo EMF in the device “thermotest,” Tomsk MTT, Tomsk, 2005, p. 4493166, pp. 33–34.10.1109/SPCMTT.2005.4493166 ↗
36. Whitehouse, D., Surfaces and Their Measurement, Boston: Butterworth-Heinemann, 2012.
37. Abouellail, A.A., Obach, I.I., Soldatov, A.A., and Soldatov, A.I., Surface inspection problems in thermoelectric testing, MATEC Web Conf., 2017, vol. 102, p. 01001. https://doi.org/10.1051/matecconf/20171020100110.1051/matecconf/201710201001 ↗
38. Paul, E.M., Introduction to Nondestructive Testing: A Training Guide, New York: Wiley, 2005, 2nd ed.
39. Plotnikov, A.L., RF Patent no. 2117557, 1998.