Vacuum Intensification of Filling Defects with Penetrants under Liquid-Penetrant Testing
Source abstract
Abstract
The vacuum intensification of the process of filling defects in stainless steel and glass samples with penetrants under liquid-penetrant testing has been studied experimentally. Results indicate a high efficiency of vacuum impregnation with small amounts of penetrants on tested surfaces, especially when detecting flaws with openings of 1–3 μm. It has been established that the sensitivity of testing is increased by 30–100% compared with the traditional technique.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Properties and Failure Mechanisms · Engineering Diagnostics and Reliability · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Nerazrushayushchii kontrol’/Spravochnik v 8 t. (Nondestructive Testing. A Handbook in 8 Vols.) Klyuev., V.V., Ed., Vol. 4, Book 3: Filinov, M.V., Kapillyarnyi kontrol’ (Liquid-Penetrant Testing) Moscow: Mashinostroenie, 2006, 2nd Ed.
2. Bogdanov, E.A., Osnovy tekhnicheskoi diagnostiki neftegazovogo oborudovaniya (Basics of Technical Diagnostics of Oil and Gas Equipment), Moscow: Vysshaya Shkola, 2006.
3. Kalinichenko, N.P. and Kalinichenko, A.N., Kapillyarnyi kontrol’: uchebnoe posobie dlya podgotovki spetsialistov I, II i III urovnya (Liquid-Penetrant Testing: A Handbook for Training Specialists of I, II and III Levels), Tomsk: Tomsk Polytech. Univ., 2010.
4. Schröder, M., Biedermann, C., and Vilbrandt, R. On the applicability of dye penetrant tests on vacuum components: Allowed or forbidden? Fusion Eng. Des., October 2013, vol. 88 (9–10), pp. 1947–1950.
5. DePetrillo, K.M., Dye penetrant test for semiconductor package assembly solder joints, US Patent 6342400 B1, publ. January 29, 2002.
6. Migun, N.P., Gnusin, A.B., and Volovich, I.V., Computerized system determines the quality of flaw detection materials, Prom. Bezop., 2004, no. 1, pp. 34–36.
7. Delenkovsky, N.V. and Gnusin, A.B., Estimating the depth of surface flaws by penetrant testing, Russ. J. Nondestr. Test., 2017, vol. 53, no. 3, pp. 231–235.10.1134/S1061830917030044 ↗
8. GOST (State Standard) R ISO 3452-3-2009. Nondestructive testing. Penetrant inspection. Part 3 Test samples.
9. GOST (State Standard) 18442–80. Nondestructive testing. Liquid-penetrant methods. General requirements.