Magnetic estimation of stresses applied to a two-layer steel CT3-steel 08X18H10T composite material during elastoplastic deformation by uniaxial tension
Source abstract
Abstract
The effect of uniaxial-tension stresses on the structure and physicomechanical properties of a two-layer Steel C T 3-Steel 08X18H10T composite material that underwent preliminary rolling and steels that contain this material was studied. Within the practically important elastic-deformation region, the coercive force, maximum magnetic permeability, and residual inductance of the materials under study were found to exhibit unambiguous behavior and can be used for estimating changes in the stressed-deformed state of articles that are made from the composite material under conditions of uniaxial tension. We demonstrated that it is possible to use the heights and positions of peaks in the field dependence of the magnetic permeability for determining the degree of elastoplastic deformation by uniaxial tension of both the composite material as a whole and the components that comprise the material for estimating the applied stresses.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Properties and Failure Mechanisms · Non-Destructive Testing Techniques · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Ramazan, K. and Mustafa, A., An Investigation on the Explosive Cladding of 316Lstainless Steel-Din-P355GH Steel, J. Mater. Proc. Technol., 2004, vol. 152, pp. 91–96.10.1016/j.jmatprotec.2004.03.012 ↗
2. Gol’dshtein, M.I., Grachev, S.V., and Veksler, Yu.G., Spetsial’nye stali: Uchebnik dlya vuzov (Special Steels: Textbook for Institutions of Higher Education), Moscow: MISIS, 1999.
3. Filippov, M.A., Litvinov, B.C., and Nemirovskii, Yu.R., Stali s metastabil’nym austenitom (Steels with Metastable Austenite), Moscow: Metallurgiya, 1988.
4. Gorkunov, E.S., Zadvorkin, S.M., Putilova, E.A., Povolotskaya, A.M., Goruleva, L.S., Veretennikova, I.A., and Kamantsev, I.S., The Application of Magnetic Structural Phase Analysis for the Diagnostics of the State of a 08X18H10t Steel-CT3 Steel Composite Material and Its Components that Were Subjected to Plastic Deformation, Rus. J. Nondestr. Test., 2012, vol. 48, no. 6, pp. 346–356.10.1134/S1061830912060022 ↗
5. Gorkunov, E.S., Zadvorkin, S.M., Smirnov, S.V., Mitropol’skaya, S.Yu., and Vichuzhanin, D.I., Correlation between the Stress-Strain State Parameters and Magnetic Characteristics of Carbon Steels, Fiz. Met. Metalloved., 2007, vol. 103, no. 3, pp. 322–327.
6. Gorkunov, E.S, Zadvorkin, S.M., Emel’yanov, I.G., and Mitropol’skaya, S.Yu., Variation of Magnetic Properties of Two-Layer Carbon-Steel Products under Tension, Fiz. Met. Metalloved., 2007, vol. 103, no. 6, pp. 657–666.
7. Vonsovskii, S.V. and Shur, Ya.S., Ferromagnetizm (Ferromagnetism), Moscow-Leningrad: OGIZ, 1948.
8. Dunaev, F.N., On the Magnetic Texture of Transformer Steel Elastically Deformed by Tension, Izv. Vyssh. Uchebn. Zaved., Ser. Fiz., 1962, no. 1, pp. 151–153.
9. Zaikova, V.A. and Shur, Ya.S., On the Effect of Tension on Magnetic Properties and Magnetostriction Curves of Siliceous Iron, Fiz. Met. Metalloved., 1966, vol. 51, no. 5, pp. 664–673.
10. Kersten, M., About the Importance of Coercive Force, in Probleme der Technischen Magnetisierungskurve, R. Becker, Ed., Berlin: Springer, 1938, pp. 42–72.10.1007/978-3-642-94548-9_4 ↗
11. Gorkunov, E.S, Zadvorkin, S.M., Mitropol’skaya, S.Yu., Vichuzhanin, D.I., and Solov’ev, K.E., Variations of Magnetic Properties of Metastable Austenitic Steel during Elastoplastic Deformation, Metalloved. Term. Obrab. Met., 2009, no. 9, pp. 15–21.10.1007/s11041-010-9185-x ↗