Coercive force of ferromagnetic steels under the biaxial symmetrical tension of a material
Source abstract
Abstract
Patterns of coercive force variations of C t .3 and X70 ferromagnetic steels under biaxial symmetrical tension within both elastic and plastic ranges of deformation were studied using X-shaped specimens. It was shown that the coercive force of isotropic polycrystalline materials increased during plastic deformation under biaxial symmetrical tension and was proportional to applied stresses (loads). Plastic deformation of materials with high initial coercive-force anisotropy along the principal directions (X70 steel) leads to an abrupt decrease in anisotropy and subsequent alternation of its sign. The patterns of a material’s coercive force behavior allow the coercive force to be used for estimating the stress-strain state (from both an increase in the coercive force and its variations during loading as compared to that of the initial material) of articles made from the studied steels under biaxial symmetrical tensile deformation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Zakharov, V.A., Borovkova, M.A., Komarov, V.A., and Muzhitskii, V.F., Effect of External Stresses on the Coercive Force of Carbon Steels, Defektoskopiya, 1992, no. 1, pp. 41–46.
2. Kuleev, V.G. and Gorkunov, E.S., Mechanisms of the Effect of Internal and External Stresses on the Coercive Force of Ferromagnetic Steels, Defektoskopiya, 1997, no. 11, pp. 3–18.
3. Gorkunov, E.S., Zadvorkin, S.M., Smirnov, S.V., et al., Correlation between the Stress-Strain State Parameters and Magnetic Characteristics of Carbon Steels, Fiz. Met. Metalloved., 2007, vol. 103, no. 3, pp. 322–327.
4. Novikov, V. F., Yatsenko, T. A., and Bakharev, M. S., Coercive Force of Low-Carbon Steels as a Function of Uniaxial Stress: Part I, Defektoskopiya, 2001, no. 11, pp. 51–57 [Rus. J. Nondestr. Test. (Engl. Transl.), 2001, vol. 37, no. 11, pp. 799–804].10.1023/A:1015899320754 ↗
5. Kuleev, V. G. and Tsar’kova, T. P., Effect of Plastic Deformations and Heat Treatment on the Behavior of the Coercive Force under Load, Fiz. Met. Metalloved., 2007, vol. 104, no. 5, pp. 479–481 [Phys. Met. Metallogr. (Engl. Transl.), 2007, vol. 104, no. 5, pp. 461–468].
6. Kuleev, V. G., Tsar’kova, T. P., Nichipuruk, et al., On the Origin of Essential Differences in the Coercive Force, Remanence, and Initial Permeability of Ferromagnetic Steels in the Loaded and Unloaded States upon Plastic Tension, Fiz. Met. Metalloved., 2007, vol. 103, no. 2, pp. 136–146.
7. Gorkunov, E. S., Zakharov, V. A., Muzhitskii, V. F., et al., Effect of Elastic and Plastic Deformations on the Coercive Force of Porous Ferromagnetic Materials, Defektoskopiya, 2005, no. 10, pp. 5–12 [Rus. J. Nondestr. Test. (Engl. Transl.), 2005, vol. 41, no. 10, pp. 627–631].10.1007/s11181-006-0013-8 ↗
8. Thompson, S.M. and Tanner, B.K., The Magnetic Properties of Specially Prepared Pearlitic Steels of Various Carbon Content as a Function of Plastic Deformation, J. Mag. Mag. Mater., 1994, no. 132, pp. 71–78.10.1016/0304-8853(94)90302-6 ↗
9. Abuku, S., Magnetic Studies of Residual Stress in Iron and Steel Induced by Uniaxial Deformation, Jpn. J. Appl. Phys., 1977, vol. 16, no. 7, pp. 1161–1170.10.1143/JJAP.16.1161 ↗
10. Gorkunov, E. S., Povoltskaya, A. M., Solov’ev, K. E., and Zadvorkin, S. M., The Influence of the Magnetoelastic Effect on the Hysteretic Properties of Medium-Carbon Steel during Uniaxial Loading, Defektoskopiya, 2010, no. 9, pp. 17–25 [Rus. J. Nondestr. Test. (Engl. Transl.), 2010, vol. 46, no. 9, pp. 638–644].10.1134/S1061830910090032 ↗
11. Shneider, C.S., Magnetoelasticity for Large Stresses, IEEE Trans. Mag., 1992, vol. 28, no. 5, pp. 2626–2631.10.1109/20.179578 ↗
12. Langman, R.A., Effect of Stress on the Magnetization of Mild Steel at Moderate Field Strengths, IEEE Trans. Mag., 1985, vol. MAG-21, no. 4, pp. 1314–1320.10.1109/TMAG.1985.1063901 ↗
13. Kostin, V. N., Tsar’kova, T. P., Nichipuruk, A. P., et al., Irreversible Changes in the Magnetization as Indicators of Stress-strain State of Ferromagnetic Objects, Defektoskopiya, 2009, no. 11, pp. 54–67 [Rus. J. Nondestr. Test. (Engl. Transl.), 2009, vol. 45, no. 11, pp. 786–798].10.1134/S1061830909110059 ↗
14. Moorthy, V., Vaidyanathan, S., Jayakumar, T., et al., Effect of Tensile Deformation on Micromagnetic Parameters in 0.2 Carbon Steel and 2.25 Cr-1 Mo Steel, Acta Mater., 1999, vol. 47, no. 6, pp. 1869–1878.10.1016/S1359-6454(99)00048-8 ↗
15. Kostin, V. N., Kadrov, A. V., and Kuskov, A. E., Magnetic Properties of a Material Used to Estimate Elastic and Plastic Strains of Ferrite-Pearlite Steels, Defektoskopiya, 2005, no. 10, pp. 13–22 [Rus. J. Nondestr. Test. (Engl. Transl.), 2005, vol. 41, no. 10, pp. 632–639].10.1007/s11181-006-0014-7 ↗
16. Liu, T., Kikuchi, H., Ara, K., et al., Magnetomechanical Effect of Low Carbon Steel Studied by Two Kinds of Magnetic Minor Hysteresis Loops, NDT&E International, 2006, vol. 39, no. 2, pp. 408–413.10.1016/j.ndteint.2005.12.001 ↗
17. Ren, S.K., Fu, R.Z., Li, X.L., et al., Influences of Environmental Magnetic Field on Stress-Magnetism Effect for 20 Steel Ferromagnetic Specimen, Insight, 2009, vol. 51, no. 12.10.1784/insi.2009.51.12.672 ↗
18. Ren, S.K., Ou, Y.-Ch., Fu, R.-Zh., and Fu, Y.-W., Studies on Stress-Magnetism Coupling Effect for 35 Steel Components, Insight, 2010, vol. 52, no. 6.10.1784/insi.2010.52.6.305 ↗
19. Langman, R., Measurements of the Mechanical Stresses in Mild Steel by Means of Rotation of Magnetic Field Strength. Part 2: Biaxial Stress, NDT&E International, 1982, vol. 15, no. 2, pp. 91–97.10.1016/0308-9126(82)90003-7 ↗
20. Langman, R., Magnetic Properties of Mild Steel under Conditions of Biaxial Stress, IEEE Trans. Mag., 1990, vol. 26, no. 4.10.1109/20.54015 ↗
21. Sablik, M.J., Riley, L.A., Burkhardt, G.L., et al., Micromagnetic Effect for Biaxial Stress Effects on Magnetic Properties, J. Magn. Magn. Mater., 1994, vol. 132, pp. 131–148.10.1016/0304-8853(94)90307-7 ↗
22. Bulte, D.P. and Langman, R.A., Origins of the Magnetomechanical Effect, J. Magn. Magn. Mater., 2002, vol. 251, pp. 229–243.10.1016/S0304-8853(02)00588-7 ↗
23. Bezlyud’ko, G.Ya., Muzhitskii, V.F., Krutikova, et al., Evaluation of the Current Condition and the Residual Lifetime of Forming Rolls Using the Magnetic Method of Nondestructive Testing Based on the Coercive Force, Defektoskopiya, 2002, no. 4, pp. 3–9 [Rus. J. Nondestr. Test. (Engl. Transl.), 2002, vol. 38, no. 4, pp. 225–230].10.1023/A:1020990002216 ↗
24. Zakharov, V.A., Muzhitskii, V.F., and Ul’yanov, A.I., Tenzometer (Tensometer), RF Utility Model Certificate No. 25346 (2002).
25. Zakharov, V.A., Ul’yanov, A.I., and Gorkunov, E.S., Patterns of the Change in the Coercive Force under Biaxial Asymmetric Deformation of Steel 3, Defektoskopiya, 2010, no. 3, pp. 55–69 [Rus. J. Nondestr. Test. (Engl. Transl.), 2010, vol. 46, no. 3, pp. 194–205].10.1134/S1061830910030071 ↗
26. Bernshtein, M.L. and Zaimovskii, V.A., Structura i mekhanicheskie svoistva metallov (Structure and Mechanical Properties of Metals), Moscow: Metallurgiya, 1970.
27. Vitsena, F., On the Effect of Dislocations on the Coercive Force of Ferromagnets, Chekhoslov. Fiz. Zh., 1955, vol. 5, pp. 480–501.