Ultrasonic Testing of Acoustic and Elastic Properties of 12Kh18N10T Steel Irradiated with Fast Electrons
Source abstract
Abstract
Abstract Special steel grades such as ChS-68 and 12Kh18N10T are used in nuclear power engineering, the space industry, medicine and other important areas of the technical sphere, and during operation are exposed to various types of destructive effects, including radiation load. This paper presents the results of a study of the effect of high-energy electron radiation on the acoustic properties of austenitic stainless-steel grade 12Kh18N10T. It was experimentally established that after exposure to electrons with an energy of 10 MeV, such parameters as the attenuation coefficient of ultrasound and the propagation velocity of transverse waves and Rayleigh waves change. These changes are due to defect formation and structural modifications of the material caused by radiation exposure. The obtained data allow us to conclude that it is necessary to take into account changes in the acoustic properties of steels when assessing their performance under radiation exposure.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Radiation Effects and Dosimetry · Nuclear and radioactivity studies · Pulsed Power Technology Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Pichkov, S.N., Zakharov, D.A., and Khlybov, A.A., Physical aspects of using waveguide lines for acoustic-emission monitoring of metal integrity in nuclear power plant containment structures, Tr. NGTU, 2020, no. 4 (131), pp. 63–70.10.46960/1816-210X_2020_4_63 ↗
2. Mitenkov, F.M., Kaidalov, V.B., Korotkikh, Yu.G., and Pichkov, S.N., Metody obosnovaniya resursa yadernykh ustanovok (Methods for Substantiating the Service Life of Nuclear Power Plants), Moscow: Mashinostroenie, 2007.
3. Khlybov, A.A., Obespechenie ekspluatatsii krupnogabaritnykh konstruktsyi po tehnicheskomu sostoyaniyu (Maintenance of Large-Scale Structures based on Technical Condition), Nizhny Novgorod: NGPU, 2008.
4. Vuolo, M., Baiocco, G., Barbieri, S., Bocchini, L., Giraudo, M., Gheysens, T., and Ottolenghi, A., Exploring innovative radiation shielding approaches in space: A material and design study for a wearable radiation protection spacesuit, Life Sci. Space Res., 2017, no. 15, pp. 69–78.10.1016/j.lssr.2017.08.003 ↗
5. Anders, J., Braccini, S., Carzaniga, T.S., Casolaro, P., and Chatterjeeet, M., A facility for radiation hardness studies based on a medical cyclotron, J. Instrum., 2022, vol. 17, no. 04, p. P04021.10.1088/1748-0221/17/04/P04021 ↗
6. De Azevedo, A.M., Cardoso, D.D.O., De Medeirjs, M.P.C., Gavazza, S., and Morales, R.K., Determination of steel and lead bi-laminated shielding for military vehicles, Braz. J. Radiat. Sci., 2023, vol. 11, no. 1A (Suppl.), pp. 1–31.10.15392/2319-0612.2023.2151 ↗
7. Adupa, C., Prakash, T. Chandhra, Ramchandar, P., and Tarun, J., Radiation hardened circuits in multiple harsh environments, Int. Conf. Recent Adv. Eng. Manage. (Warangal, 2020), vol. 981, no. 3, p. 032044.10.1088/1757-899X/981/3/032044 ↗
8. Pavan Kumar, M. and Lorenzo, R., A review on radiation-hardened memory cells for space and terrestrial applications, Int. J. Circuit Theory Appl., 2023, vol. 51, no. 1, pp. 475–499.10.1002/cta.3429 ↗
9. Rockett, L., Patel, D., Danziger, S., Wang, J.J., and Cronquist, B., Radiation hardened FPGA technology for space applications, 2007 IEEE Aerosp. Conf. (Big Sky, 2007), pp. 1–7.
10. Klyushnikov, V.A. and Mishakin, V.V., Investigation of the effect of plastic deformation on acoustic and magnetic characteristics of austenitic and austenitic-ferritic steels, Vestnik Bauman MGTU Mashinostr., 2018, no. 2 (119).
11. Latypova, D.R., Investigation of corrosion of the contact pair of steels 09G2S/12Kh18N10T in process media of column equipment, Neftegaz. Delo, 2020, vol. 18, no. 6, pp. 122–129.
12. Jerin, A. and Karunakaran, K., Minimizing maximum height of the profile on stainless steel of 12X18H10T for ECM, AIP Conf. Proc., 2022, vol. 2473, no. 1.10.1063/5.0096480 ↗
13. Tkacheva, A.A., Makarevich, V.O., and Korneeva, E.K., Features of radiation resistance of steels and alloys, Sb. Nauchn. Tr. VI Mezhdunar. Nauchn.-Prakt. Internet Konf. Stud. Magistr., 2023, pp. 160–163.
14. Murav’ev, V.V., Budrin, A.Yu., and Sintsov, M.A., Effect of cyclically varying loads on shear and Rayleigh wave velocities in steel rods with different heat treatments, Intell. Sist. Pr-va, 2020, vol. 18, no. 4, pp. 4–10.
15. Khlybov, A.A., Uglov, A.L., Ryabov, D.A., and Anosov, M.S., Assessment of damage in structural metallic materials by acoustic methods, Vestnik IzhGTU, 2022, vol. 25, no. 4, pp. 18–26.
16. Khlybov, A.A., Kabaldin, Yu.G., Ryabov, D.A., Anosov, M.S., and Shagatin, D.A., Investigation of damage in samples of steel 12Kh18N10T under low-cycle fatigue by nondestructive testing methods, Zavod. Lab. Diagn. Mater., 2021, vol. 87, no. 5, pp. 61–67.10.26896/1028-6861-2021-87-5-61-67 ↗
17. Matlack, K.H., Kim, Jin-Yeon, Wall, J., and Qu, J., Radiation damage characterization in reactor pressure vessel steels with nonlinear ultrasound, AIP Conf. Proc., 2014, vol. 1581, no. 1, pp. 1007–1013.10.1063/1.4864931 ↗
18. Koskinen, T.S., Artificial flaw detection with ultrasound in austenitic stainless steel, Dissertation, Tampere: Tampere Univ. Technol., 2016.
19. Okita, T., Etoh, J., Sagisaka, M., Matsunaga, T., Isobe, Y., Freyer, P.D., Huang, Y., Wiezorek, J.M.K., and Garner, F.A., Validation of ultrasonic velocity measurements for detecting void swelling in first-wall structural materials, Fusion Sci. Technol., 2014, vol. 66, no. 1, pp. 77–82.10.13182/FST13-755 ↗
20. Baev, A.R., Asadchaya, M.V., Sergeeva, O.S., and Konovalov, G.E., Propagation of Rayleigh waves in solids with technological protrusions, Prib. Met. Izmeren., 2011, no. 2 (3).
21. Zatsepin, A.F., Akusticheskie izmereniya (Acoustic Measurements), Moscow: Yurait, 2024.
22. Drouin, D., Couture, A.R., Joly, D., Tastet, X., Aimez, V., and Gauvin, R., CASINO V2.42: a fast and easy-to-use modeling tool for scanning electron microscopy and microanalysis users, Scanning, 2007, vol. 29, no. 3, pp. 92–101.10.1002/sca.20000 ↗
23. Kretov, E.F., Ul’trazvukovaya defektoskopiya v energomashinostroenii (Ultrasonic Flaw Detection in Power Engineering), St. Petersburg: Radioavionika, 1995.
24. Vasil’ev, A.V., Biryukov, D.Yu., and Zatsepin, A.F., Software for monitoring ultrasound attenuation coefficient and analyzing material microstructure, Certificate of State Registration of Computer Programs, reg. no. 2024669749, 2024.
25. Brazhnikov, N.I., Ul’trazvukovie metody (Ultrasonic Methods), Moscow-Leningrad: Energiya, 1965.
26. Dalin, M.A., Chertishchev, V.Yu., Krasnov, I.S., and Raevskikh, A.N., Investigating cases of “abnormal” attenuation of ultrasonic oscillations in blanks of nickel heat-resistant alloys, Russ. J. Nondestr. Test., 2020, vol. 56, no. 12, pp. 984–994.10.1134/S1061830920120037 ↗
27. Podymova, N.B., Ermolinskiy, A.B., and Chernov, M.S., Nondestructive testing of local microcracking in laboratory mineral samples using an acoustic method with a laser source of ultrasound and its verification with X-ray computed tomography, Russ. J. Nondestr. Test., 2023, vol. 59, no. 10, pp. 1018–1026.10.1134/S1061830923600697 ↗
28. Muraviev, V.V., Muravieva, O.V., and Vladykin, A.L., Acoustic and electromagnetic properties of maraging iron–chromium–nickel alloy with addition of copper in mechanical tension, Russ. J. Nondestr. Test., 2023, vol. 59, no. 5, pp. 515–523.10.1134/S1061830923700365 ↗